thanhtran Posted February 28, 2017 Share Posted February 28, 2017 (edited) I have unRAID 6.1.9 with 15 disks, all disk are full. I just put 5TB Toshiba HDWE150 disk to slot 16, but unRAID not recognize this disk ( I have another WD 5tb for parity in system) . Something is wrong with the disk or Toshiba HDWE150 disk is not compatible with unRAID ? I put Toshiba HDWE150 to USB enclosure and connect to PC with windows 7_x64 , the windows 7 is recognized Toshiba HDWE150 disk but the volume about 460meg bytes (half tb) . Do Any one that use this model with unRAID before ? I dónt want return this disk if I dónt know it is bad for sure. Thanks Edited March 15, 2017 by thanhtran Quote Link to comment
dikkiedirk Posted February 28, 2017 Share Posted February 28, 2017 (edited) I use several in my server from the same family, the 6 TB HDWE 160 without any issue. Did you preclear the disk first? Don't understand thar .5 TB partition. Edited February 28, 2017 by dikkiedirk Quote Link to comment
thanhtran Posted February 28, 2017 Author Share Posted February 28, 2017 Thanks very much, time to send back Newegg . Quote Link to comment
thegizzard Posted February 28, 2017 Share Posted February 28, 2017 I have one too. No problems. Sent from my SM-N920V using Tapatalk Quote Link to comment
thanhtran Posted March 1, 2017 Author Share Posted March 1, 2017 16 hours ago, dikkiedirk said: I use several in my server from the same family, the 6 TB HDWE 160 without any issue. Did you preclear the disk first? Don't understand thar .5 TB partition. Thanks for help, I found out 3rd Sata controller is bad, I have to order and replace it, also RMA Toshiba HDWE 150, because windows 7 recognized only 600Gig . Wait and see.... Quote Link to comment
dikkiedirk Posted March 1, 2017 Share Posted March 1, 2017 Was the disk precleared? Windows shouldn't see any partition on it then? Quote Link to comment
thanhtran Posted March 1, 2017 Author Share Posted March 1, 2017 7 hours ago, dikkiedirk said: Was the disk precleared? Windows shouldn't see any partition on it then? Last night , I put this disk to my unRAID server with other controller, I see it report about 600g ( this disk is clean with windows 7 diskpart command line) , I assume it is bad and not run precleared, in the time wait for orther controller to come (in order), I send back Neweggs to replace new disk. I'll report if I solve problem. Quote Link to comment
thanhtran Posted March 15, 2017 Author Share Posted March 15, 2017 (edited) Problem is solved !!! 1st . Bad controller 2rd. Replace LSI SAS3081E-R controller work, but max can recognize 2.2 tb. 3rd. Swap to different location (Supermicro controller) , unRAID sees 5tb. Thanks for your advice Edited March 15, 2017 by thanhtran Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.