March 6, 20179 yr Hi all, My apartment had a brief (2 min.) power outage. When I turned my server back on, one drive is now showing a red X. I bought the drive in April 2016, the other drive on the SATA controller (2 ports) doesn't show any errors. I don't hear any clicking, full diagnostics attached, should I attempt a rebuild or is there something wrong with the drive? gotham-diagnostics-20170306-1047.zip edit: the drive in question is WDC_WD40EFRX-68WT0N0_WD-WCC4E0VK4DVZ-20170306-1047 Edited March 6, 20179 yr by SpartyPh
March 6, 20179 yr Community Expert Don't see the write errors that would have caused it to be disabled in the syslog. Did you reboot again after you saw that it was disabled? If so, then we can't tell much else about it. You should always try to get a diagnostic before rebooting. SMART for the disk looks OK. Check connections. You can rebuild the drive to itself.
March 6, 20179 yr Author Shoot, yeah, when it came up with the red X I immediately turned the computer off reset the cables and turned it back on, major fault on my part
Archived
This topic is now archived and is closed to further replies.