March 18, 20179 yr On both of my devices, UNRAID can not start web gui, but ssh can log in. I tried 6.24 and 6.32 version, web gui mode can not open the web configuration page
March 18, 20179 yr Author GUI mode gives you a GUI console with firefox browser to access the webUI. But in the GUI mode firefox browser, but also can not open the web gui page
March 18, 20179 yr Same problem here. No access to the web interface, remotely or in the gui mode. I do have internet access though.
March 18, 20179 yr Author 27 minutes ago, 1812 said: please explain how you are attempting to access the web gui. I follow the steps of the official youtube video, very standard
March 18, 20179 yr When you boot in the non-GUI mode, do you get a login prompt on the console monitor? If you do, login and enter diagnostics at the command line prompt. That will write the diagnostics file to your Flash Drive. Upload that file with your next post. IF you don't get the login prompt, describe exactly what you see on the monitor or (better yet) take a picture of that screen. (Make sure that it is in focus, not blurry and does not have a 'flash blob' concealing the text!) NOTE to master fx ---- You would be better served if you posted your issue (it may not have the same solution of as the OP) in a new thread. Of course, you can follow along but it sometimes makes it confusing when trying to help two folks with a similar problem with different solutions in the same thread... Edited March 18, 20179 yr by Frank1940
March 18, 20179 yr Author 2 minutes ago, Frank1940 said: When you boot in the non-GUI mode, do you get a login prompt on the console monitor? If you do, login and enter diagnostics at the command line prompt. That will write the diagnostics file to your Flash Drive. Upload that file with your next post. IF you don't get the login prompt, describe exactly what you see on the monitor or (better yet) take a picture of that screen. (Make sure that it is in focus, not blurry and does not have a 'flash blob' concealing the text!) NOTE to master fx ---- You would be better served if you posted your issue (it may not have the same solution of as the OP) in a new thread. Of course, you can follow along but it sometimes makes it confusing when trying to help two folks with a similar problem with different solutions in the same thread... Start the process link
March 18, 20179 yr 34 minutes ago, turingking said: Start the process link You apparently have some issue with your preparation of the flash drive, since it cannot find the device labeled UNRAID.
March 18, 20179 yr Author 35 minutes ago, trurl said: You apparently have some issue with your preparation of the flash drive, since it cannot find the device labeled UNRAID. thank you very much！I use the partitioning tool to remove the mobile USB partition and rebuild, and now the problem has been resolved Edited March 18, 20179 yr by turingking
Archived
This topic is now archived and is closed to further replies.