Dazog Posted January 11, 2019 Share Posted January 11, 2019 5.10.5 is out: https://community.ubnt.com/t5/UniFi-Wireless-Beta/UniFi-Network-Controller-5-10-5-beta-has-been-released/m-p/2627909#M76790 Quote Link to comment
Dazog Posted January 21, 2019 Share Posted January 21, 2019 any chance for the 5.10.5 to be pushed? Quote Link to comment
Dazog Posted January 27, 2019 Share Posted January 27, 2019 5.10.10 is out https://community.ubnt.com/t5/UniFi-Beta-Blog/UniFi-Network-Controller-5-10-10-Stable-Candidate-has-been/ba-p/2649077 Quote Link to comment
Dazog Posted January 30, 2019 Share Posted January 30, 2019 5.10.11 is out https://community.ubnt.com/t5/UniFi-Beta-Blog/UniFi-Network-Controller-5-10-11-Stable-Candidate-has-been/ba-p/2654117 Quote Link to comment
Nyghthawk Posted February 3, 2019 Share Posted February 3, 2019 Got this running without much of a problem, and for some reason, just decided to check my logs. Wondering, what this is..... [22;36m:0 webRtcId 9 connected in 0.229 seconds! This is STUN from 172.17.0.11:53157 -> 192.168.0.114:57726[22;37m [01;33m:0 TURN channel binding 0x4003 failed[22;37m [01;33m:0 TURN channel binding 0x4000 failed[22;37m [01;33m:0 TURN channel binding 0x4004 failed[22;37m [01;33m:0 TURN channel binding 0x4001 failed[22;37m [01;33m:0 TURN channel binding 0x4002 failed[22;37m [01;33m:0 STUN timed out: STUN id: 3; fd: 204 172.17.0.11:34508 -> 192.168.0.114:52817 (eth0) DTLS id: 8 (192.168.0.133:34508) (PEER)[22;37m [01;33m:0 webRtcId 10 terminated with code: (-2147090409) WebRTC connection interrupted from far side[22;37m [01;33m:0 read() failed on a timer FD. Error was: (9) Bad file descriptor[22;37m this continues on from different PORTS but the same IP.... 192.168.0.114 is my iphone that I occasionally run the unifi app on to check on things. Is this just the controller trying to further communicate with the ios controller/app too? also second question. I am currently NOT updating every time, because I don't know how to revert back to a different version. So if i end up updating, how can I revert back to the previous version? Quote Link to comment
Dazog Posted February 5, 2019 Share Posted February 5, 2019 5.10.12 is out: https://community.ubnt.com/t5/UniFi-Beta-Blog/UniFi-Network-Controller-5-10-12-Stable-Candidate-has-been/ba-p/2661477 1 Quote Link to comment
p.wrangles Posted February 12, 2019 Share Posted February 12, 2019 Hello, im really struggling to get a Remote / Central Unifi set up. I have a controller which I have connected to my local AP's and this works fine. Im trying to use the same controller with remote AP's at a client location but the AP's can't seem to connect to the controller - I am using LetsEncrypt with Nginx for SSL on the controller front end and this works no problem. I have a Ubiquiti edge router X and I have forwarded port 8080 onto my Unraid server port 8080 - but it doesn't seem to be getting through? Here is a screenshot of my EdgeRouter X Port Forwarding: And here is a screenshot of my UNRAID Docker Configuration: I also have the same issue with the guest portal. If I want to use a specified host name (my DDNS) it doesn't connect. - but using ip (when on the same network) will. Quote Link to comment
Dazog Posted February 16, 2019 Share Posted February 16, 2019 5.10.19 is out https://community.ubnt.com/t5/UniFi-Beta-Blog/UniFi-Network-Controller-5-10-19-Stable-Candidate-has-been/ba-p/2680361 Quote Link to comment
Dazog Posted March 8, 2019 Share Posted March 8, 2019 5.10.20 https://community.ubnt.com/t5/UniFi-Beta-Blog/UniFi-Network-Controller-5-10-20-Stable-Candidate-has-been/ba-p/2707978 Quote Link to comment
Select25 Posted April 17, 2019 Share Posted April 17, 2019 5.10.21 is out. Is it possible to update? Quote Link to comment
Tergo247 Posted June 7, 2019 Share Posted June 7, 2019 5.10.24 is a thing... wink wink. I just got my first Ubiquiti gateway/ap and foolishly set it up on my laptop. In retrospect, I'm not sure how I would have accessed my server to configure it from there, but at any rate it sure would be nice to migrate my site over to your awesome docker. Nudge nudge. Quote Link to comment
rlust Posted July 9, 2019 Share Posted July 9, 2019 An¥ chant to upgrade to 5.10.25? Quote Link to comment
Zancthra Posted November 9, 2019 Share Posted November 9, 2019 Any plans to update? Quote Link to comment
brettm357 Posted November 11, 2019 Author Share Posted November 11, 2019 New update pushed in 2 days Quote Link to comment
Runaround Posted November 22, 2019 Share Posted November 22, 2019 Hello, I'm having trouble with the custom gateway config. I have the file setup in the correct location with the correct settings, but the gateway seems to never load it on reboot it. I know the settings are correct because I copied them from the running config after setting it through the gateway's shell. How can I troubleshoot this custom config file not loading? Quote Link to comment
Zancthra Posted November 22, 2019 Share Posted November 22, 2019 11 minutes ago, Runaround said: Hello, I'm having trouble with the custom gateway config. I have the file setup in the correct location with the correct settings, but the gateway seems to never load it on reboot it. I know the settings are correct because I copied them from the running config after setting it through the gateway's shell. How can I troubleshoot this custom config file not loading? That usually means you are saving the config onto a location that isn't one of your disks. For example, if you select /mnt/cache as your config location but don't have a cache drive, it will save the config into RAM and be lost on reboot. Quote Link to comment
Runaround Posted November 23, 2019 Share Posted November 23, 2019 On 11/21/2019 at 10:41 PM, Zancthra said: That usually means you are saving the config onto a location that isn't one of your disks. For example, if you select /mnt/cache as your config location but don't have a cache drive, it will save the config into RAM and be lost on reboot. I don’t think that’s the issue. I have the file stored in default site folder where it should be. Everything else in UniFi is working besides the firewall loading the advanced config file. The config location for the container is in /mnt/user/appdata and I can see the gateway config file in there. Quote Link to comment
Zancthra Posted November 23, 2019 Share Posted November 23, 2019 1 hour ago, Runaround said: I don’t think that’s the issue. I have the file stored in default site folder where it should be. Everything else in UniFi is working besides the firewall loading the advanced config file. The config location for the container is in /mnt/user/appdata and I can see the gateway config file in there. Have you checked permissions on the firewall config file? Are they the same as the other files in that location? Quote Link to comment
Zancthra Posted April 10, 2020 Share Posted April 10, 2020 Will you be updating soon? Quote Link to comment
fredamn76 Posted June 9, 2020 Share Posted June 9, 2020 Where should the config.gateway.json file be located? No sites folder has been created by the system in my data folder Quote Link to comment
Runaround Posted June 9, 2020 Share Posted June 9, 2020 5 hours ago, fredamn76 said: Where should the config.gateway.json file be located? No sites folder has been created by the system in my data folder It's under the appdata/unifi/sites/default folder. 1 Quote Link to comment
labalicious Posted June 18, 2020 Share Posted June 18, 2020 Anyone else having issues with a memory leak? If I ignore it for a few days, it grows to unmanageable size. 5.75gb after 10 days. Quote Link to comment
stefan marton Posted August 24, 2020 Share Posted August 24, 2020 is possible upgrade to 5.14.22 ? Quote Link to comment
InVisibleGoD Posted September 26, 2020 Share Posted September 26, 2020 Since a few days ago the controller is not initiating! Anyone else with same problem? This is the docker's log, not sure if it helps... 2020-09-26 15:57:19,304 CRIT Supervisor running as root (no user in config file) 2020-09-26 15:57:19,304 INFO Included extra file "/etc/supervisor/conf.d/supervisord.conf" during parsing 2020-09-26 15:57:19,308 INFO RPC interface 'supervisor' initialized 2020-09-26 15:57:19,308 CRIT Server 'unix_http_server' running without any HTTP authentication checking 2020-09-26 15:57:19,308 INFO supervisord started with pid 1 2020-09-26 15:57:20,311 INFO spawned: 'unifi' with pid 8 2020-09-26 15:57:21,312 INFO success: unifi entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) Quote Link to comment
Cobragt88 Posted November 5, 2020 Share Posted November 5, 2020 (edited) Hi, Thanks for a great stable docker app, just wanted to know if an update was coming soon as I keep getting notices when I login to the web UI that there is a new version of the controller software. Would be nice when I click dismiss and don't show me this notice again that it doesn't come back, it does that's the only problem I'm having minor. thanks again for all this great work on this great docker. Is it possible to update to 6.0.36? Edited November 23, 2020 by Cobragt88 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.