Jump to content
brettm357

[Support] brettm357 - UniFi

116 posts in this topic Last Reply

Recommended Posts

Got this running without much of a problem, and for some reason, just decided to check my logs.

 

Wondering, what this is.....

 

[22;36m:0 webRtcId 9 connected in 0.229 seconds! This is STUN from 172.17.0.11:53157 -> 192.168.0.114:57726[22;37m
[01;33m:0 TURN channel binding 0x4003 failed[22;37m

[01;33m:0 TURN channel binding 0x4000 failed[22;37m

[01;33m:0 TURN channel binding 0x4004 failed[22;37m

[01;33m:0 TURN channel binding 0x4001 failed[22;37m

[01;33m:0 TURN channel binding 0x4002 failed[22;37m
 

 

 

[01;33m:0 STUN timed out: STUN id: 3; fd: 204 172.17.0.11:34508 -> 192.168.0.114:52817 (eth0) DTLS id: 8 (192.168.0.133:34508) (PEER)[22;37m
[01;33m:0 webRtcId 10 terminated with code: (-2147090409) WebRTC connection interrupted from far side[22;37m
[01;33m:0 read() failed on a timer FD. Error was: (9) Bad file descriptor[22;37m

 

this continues on from different PORTS but the same IP....

192.168.0.114 is my iphone that I occasionally run the unifi app on to check on things.

 

Is this just the controller trying to further communicate with the ios controller/app too?

 

 

also second question.

 

I am currently NOT updating every time, because I don't know how to revert back to a different version.

 

So if i end up updating, how can I revert back to the previous version?

 

 

Share this post


Link to post

Hello, im really struggling to get a Remote / Central Unifi set up. I have a controller which I have connected to my local AP's and this works fine.

 

Im trying to use the same controller with remote AP's at a client location but the AP's can't seem to connect to the controller - I am using LetsEncrypt with Nginx for SSL on the controller front end and this works no problem.

 

I have a Ubiquiti edge router X and I have forwarded port 8080 onto my Unraid server port 8080 - but it doesn't seem to be getting through?

 

 Here is a screenshot of my EdgeRouter X Port Forwarding:

image.thumb.png.4082ec1b09d9945afeb161f24e6acb67.png

 

And here is a screenshot of my UNRAID Docker Configuration:

image.thumb.png.98fd7d61ed9dfdf93bb21654d3072f5d.png

 

I also have the same issue with the guest portal. If I want to use a specified host name (my DDNS) it doesn't connect. - but using ip (when on the same network) will.

 

Share this post


Link to post

5.10.24 is a thing... wink wink. I just got my first Ubiquiti gateway/ap and foolishly set it up on my laptop. In retrospect, I'm not sure how I would have accessed my server to configure it from there, but at any rate it sure would be nice to migrate my site over to your awesome docker. Nudge nudge. :D

Share this post


Link to post

Hello,

 

I'm having trouble with the custom gateway config. I have the file setup in the correct location with the correct settings, but the gateway seems to never load it on reboot it. I know the settings are correct because I copied them from the running config after setting it through the gateway's shell. How can I troubleshoot this custom config file not loading?

Share this post


Link to post
11 minutes ago, Runaround said:

Hello,

 

I'm having trouble with the custom gateway config. I have the file setup in the correct location with the correct settings, but the gateway seems to never load it on reboot it. I know the settings are correct because I copied them from the running config after setting it through the gateway's shell. How can I troubleshoot this custom config file not loading?

That usually means you are saving the config onto a location that isn't one of your disks. For example, if you select /mnt/cache as your config location but don't have a cache drive, it will save the config into RAM and be lost on reboot.

 

 

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.