April 3, 20179 yr Good day crew, Strange one here for some more knowledgeable eyes than my own as to what needs to be done. After the first server was updated without issue (parity check, data use OK, etc) I updated my second server. Shortly after reboot the log started clogging with a set of errors that I have never before seen. Apr 3 07:18:42 Tower2 kernel: ata1: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen Diagnostics attached Thanks for looking! tower2-diagnostics-20170403-0925.zip
April 3, 20179 yr Community Expert Very strange, since nothing is on that port: Apr 2 21:11:35 Tower2 kernel: ata1: SATA link down (SStatus 0 SControl 300)
April 4, 20179 yr also have strange entries ... Apr 4 06:53:44 Terok-Nor root: error: plugins/preclear.disk/Preclear.php: wrong csrf_token
April 4, 20179 yr 1 hour ago, abs0lut.zer0 said: also have strange entries ... Apr 4 06:53:44 Terok-Nor root: error: plugins/preclear.disk/Preclear.php: wrong csrf_token This may help?
April 4, 20179 yr On 4/3/2017 at 7:35 AM, landS said: Good day crew, Strange one here for some more knowledgeable eyes than my own as to what needs to be done. After the first server was updated without issue (parity check, data use OK, etc) I updated my second server. Shortly after reboot the log started clogging with a set of errors that I have never before seen. Apr 3 07:18:42 Tower2 kernel: ata1: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen Diagnostics attached Thanks for looking! tower2-diagnostics-20170403-0925.zip Normally for this kind of error I'd say check your cabling, reseat controllers, etc., but it looks like there is nothing attached to that port. What unRaid OS version did you upgrade from?
April 4, 20179 yr Author 37 minutes ago, limetech said: Normally for this kind of error I'd say check your cabling, reseat controllers, etc., but it looks like there is nothing attached to that port. What unRaid OS version did you upgrade from? 6.3.2 This morning I stopped the array, rebooted, and after an hour of idling it is full of the same errors again Edited April 4, 20179 yr by landS
April 8, 20179 yr Author Bump... Any idea of what to do on this one crew? Anything else I can try? I have tried restarting, running parity, running mover, spin ups, spin downs. .. No rhyme or reason Ive noticed to this error cropping up. Clean/safe boot option also throws the errors. Memtest is fine. ... Or do I live with these strange errors as no device is on the troublesome port.... And hope my complacency with these errors doesn't cause me to miss a real one Edited April 8, 20179 yr by landS
April 9, 20179 yr Author No Joy Apr 8 22:19:49 Tower2 kernel: ata1: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozeApr 8 22:19:49 Tower2 kernel: ata1: irq_stat 0x00000040, connection status changedApr 8 22:19:49 Tower2 kernel: ata1: SError: { DevExch }Apr 8 22:19:49 Tower2 kernel: ata1: hard resetting linkApr 8 22:19:50 Tower2 kernel: ata1: SATA link down (SStatus 0 SControl 300)Apr 8 22:19:50 Tower2 kernel: ata1: EH completeApr 8 22:27:44 Tower2 kernel: ata1: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen Apr 8 22:27:44 Tower2 kernel: ata1: irq_stat 0x00000040, connection status changedApr 8 22:27:44 Tower2 kernel: ata1: SError: { DevExch }Apr 8 22:27:44 Tower2 kernel: ata1: hard resetting linkApr 8 22:27:45 Tower2 kernel: ata1: SATA link down (SStatus 0 SControl 300)Apr 8 22:27:45 Tower2 kernel: ata1: EH complete
April 9, 20179 yr Author WTF.... My parity check normally hovers around 150 MB/sec and is done within 6 hours. It is going on 11 hours, showing 8 remaining and is stuck down at 32 MB/sec ... edit: over 20 hours to complete the parity check and pages of these strange errors. ctivity started on Sun 09 Apr 2017 08:48:17 PM CDT (today), finding 0 errors.Last result: 20 hours, 35 minutes, 18 seconds. Average speed: 54.0 MB/s Now I am reverting from 'previous' folder on flash (3.3.2) and will put the server through it's paces then report back. Edited April 10, 20179 yr by landS
April 10, 20179 yr Author Dang.... V6.3.2 now tosses this error too... Just not as frequently. Is it time to accept that a new motherboard, ram, cpu are in order? I don't know what else I can do from here.
April 10, 20179 yr Community Expert 3 minutes ago, landS said: V6.3.2 now tosses this error too.. Makes sense, looks like a hardware problem, most likely the onboard controller.
April 21, 20179 yr Author My Tower (D525) has been massively upgraded with a E5-1650v3 My Tower2's faulty motherboard has been replaced with the D525 setup (same mobo, ram, Dell Perc H310 controller). ***Attached eSata cable to Sata-3 onboard ***Attached Optical disk drive cable to Sata-4 onboard ***Attached Cache disk drive cable to Sata-0 onboard ***this SSD is BTRFS*** ***2 parity and 4 data disks remain on the IT Crossflashed to LSI Dell Perc H310 MMMM... after boot I have this: Apr 21 13:55:27 Tower2 kernel: ata5: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen t4 Apr 21 13:55:27 Tower2 kernel: ata5: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen t3 Apr 21 13:56:27 Tower2 kernel: ata5: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen t2 Apr 21 13:57:29 Tower2 kernel: ata5: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen t1 Edited April 21, 20179 yr by landS
April 23, 20179 yr Author UGG! Yanked the disc drive.... errors gone Reverted to original Asus mobo & i5-2500... errors gone Reverted to original SASLP.... errors gone. Tossed X7SPA and Dell perc back in... as I 'believe' the hardware is better quality than the Asus & i5-2500... And this is for a basic backup NAS
Archived
This topic is now archived and is closed to further replies.