Hello,

 

ive got 32GB Sandisk Ultra fit drive (ive tough bigger better), but after using unraid (trial for now) ive find out that is using just around 500mb.

So my question is:

1. if i necessary to have some amount of size or are there any other future data being written there later?

2. Or i can just use any other fast4-8gb USB 3.0 Flash as the 500mb +- size will stay forever?  

3. or even olter slower one = slower boot up time or any thing else?

 

Want to get this sorted before i buy / register some USB Flash...bigger can be used for music for my car or so

 

Thanks

Usage on the flash will stay around the same more or less for the foreseeable future.

 

Slower flash = slower boot times, but that doesn't particularly matter much as most servers do not shut off / reset very often

I've got 1.3GB used on a very mature installation, and very little housekeeping. Extra capacity theoretically can be used for wear leveling given a good controller, but 32GB is way excessive. Not sure I'd even recommend USB 3.0 over 2.0, I think linux 3.0 controller support is still a little flakey, considering some of the issues we've seen around the forums for booting USB 3.0. I'd definitely test out a new USB stick with a trial version of unraid for several boot cycles before assigning it a license.

And some users have had issues with USB3 flash or USB3 port, so USB2 might be a more reliable choice.

thanks guys for all replies...ive got usb 3.0 and no issues at all with booting.

So i will replace it with smaller Flash drive

Im using a 8gb usb3 flash drive with. No issues in a usb3 port. Handy as i have hundreds of them as promotional gifts


Sent from my iPhone using Tapatalk

I have a 2GB USB2 Sandisk Cruzer that has been running in my Build since day 1. 

 

I'm at 700Meg used with everything on it.