Ok .. so I have been having issues with losing connection with the sever.  Seems every time I make A change in the GUI and hit save or start / stop .. I can not reconnect.   or http://tower.

 

What I have done so far..

 

Set up an array. 

...

changed array

..

changed named

 

 

Server has 3x built Lan ports ( think one is for something else).

When testing after disconnects ... I changed witch port the cable was plugged in with out restarting and it worked.

it then did it again .. so I change it back and nothing.

I then ran A 100ft cat6 cable across my floor and tried they (vs the cat5e that is in the walls) ..  same issue.

set up A switch near the sever and had all 3x lan ports plugged into it .. with the cat6 going back too router.. 

disabled all the onboard lans and installed A Quad Intel Gigbit PCie X4 card.  (this changed the IP) 

changed the name of sever and saved .. happend again.

 

when I ping the IPv4 address it just times out ... if I restart .. it works again till I make A change.

 

when I use A command on the host ... lets say ... ifconfig .... how do I brake it up in pages or scroll up ...   using the onboard GPU and its A shiiy 16meg .. so its not show alot on screen / cant see the upper info

 

 

I am having a similar issue.  I was able to make changes in the GUI when I accessed it through my smartphone's browser.  You could attempt that to get your diagnostic zip file

Have you tried accessing through different browsers and see if the problem follows? Post your diagnostics zip file tools diagnostics.

does the same in any browser.

 

When click download for the diagnostics .... it does not respond any more ... the IP can no longer be pinged.

 

its just like everything else ...once A change is made in GUI ... I can not connect. 

 

cant get the diag file 

Edited April 12, 20179 yr by Neko77025

There is an issue cropping up if you are using a browser on a Windows 10 PC. Could you let us know if that is what you have been attempting and if you tried any browser from a non-windows device

Sent from my Nexus 6P using Tapatalk

1 hour ago, TheFullTimer said:

There is an issue cropping up if you are using a browser on a Windows 10 PC. Could you let us know if that is what you have been attempting and if you tried any browser from a non-windows device

Sent from my Nexus 6P using Tapatalk
 

yea .. this is the issue.

 

(just tried these after reading what you typed)

 

Windows 8 computer  ... no issues can stop / start Array make changes .. exit out and reconnect to IP with out any issues at all.

Android Phone .... no issues can stop / start Array make changes .. exit out and reconnect to IP with out any issues at all.

Parted Magic (Virtualbox VM running in RAM, on windows 10 PC) ...  no issues can stop / start Array make changes .. exit out and reconnect to IP with out any issues at all.

Ubuntu (Virtualbox VM running on windows 10 PC)  ...  no issues can stop / start Array make changes .. exit out and reconnect to IP with out any issues at all.

Teamviewer from Windows 10 PC to Windows 8 PC (Same network)  ...  no issues can stop / start Array make changes .. exit out and reconnect to IP with out any issues at all.

 

Windows 10s PC any Browser (well the 3x I tried) ,  Chrome , IE and Firefox .... will work till you make changes in GUI that are a Switch type .. on / off or start / stop.  Also at this point if you open CMD and ping the IP, it will return 4x timed out trys.

 

I also uninstalled Avast .. it still does it .. so its not avast.   going to see what is running and remove them and try again. 

 

 

Anyhow ... I will post any new info.

 

However I can at least play with unRAID now and see if I even like it / get it to do what I want .  

 

Thanks Neko

 

Edited April 12, 20179 yr by Neko77025