April 16, 20179 yr 3 minutes ago, turingking said: ok,Wait for a while, about 30 minutes, web pages can be opened Then you should upload a new set of diagnostics with that delay in it....
April 16, 20179 yr Author 3 minutes ago, Squid said: Then you should upload a new set of diagnostics with that delay in it.... ok,this is new log file : tower-diagnostics-20170416-0821.zip I have encountered this problem twice today Edited April 16, 20179 yr by turingking
April 16, 20179 yr Not sure... But I am curious what this stick is: Apr 16 07:41:57 Tower kernel: scsi 3:0:0:0: Direct-Access SanDisk Ultra Fit 1.00 PQ: 0 ANSI: 6 Apr 16 07:41:57 Tower kernel: sd 3:0:0:0: Attached scsi generic sg2 type 0 Apr 16 07:41:57 Tower kernel: sd 3:0:0:0: [sdc] 30031250 512-byte logical blocks: (15.4 GB/14.3 GiB) as its not your boot flash drive (Apr 15 06:51:36 Tower emhttp: Kingston_DataTraveler_3.0_60A44C3FAC7DAF2100001445-0:0 (sda) 15187936), and it seemed to be the start of some mounting errors
April 17, 20179 yr Author 20 hours ago, Squid said: Not sure... But I am curious what this stick is: Apr 16 07:41:57 Tower kernel: scsi 3:0:0:0: Direct-Access SanDisk Ultra Fit 1.00 PQ: 0 ANSI: 6 Apr 16 07:41:57 Tower kernel: sd 3:0:0:0: Attached scsi generic sg2 type 0 Apr 16 07:41:57 Tower kernel: sd 3:0:0:0: [sdc] 30031250 512-byte logical blocks: (15.4 GB/14.3 GiB) as its not your boot flash drive (Apr 15 06:51:36 Tower emhttp: Kingston_DataTraveler_3.0_60A44C3FAC7DAF2100001445-0:0 (sda) 15187936), and it seemed to be the start of some mounting errors I recently replaced the motherboard, and reinstalled the UNRAID on my USB device. Because i found the docker not working correctly. This does solve the docker problem, but web gui sometimes can not open. I intend to use a new usb device to install UNRAID, need to format the hard disk?
April 17, 20179 yr 53 minutes ago, turingking said: I recently replaced the motherboard, You should run memtest from the boot menu for at least one pass (ideally 24hours)
Archived
This topic is now archived and is closed to further replies.