April 20, 20179 yr My USB Keyboard and Mouse keep stop working randomly,and it start work again if i unplug and replug again Some time even BSOD DRIVER_IRQL_NOT_LESS_OR_EQUAL usbxhci.sys some time the mouse can't left or right click and didn't work even replug it Using Windows 10 Pro 64 Bit in a UNraid 6 VM Part list: https://pcpartpicker.com/list/XDZppb
April 20, 20179 yr I assume you're operating the VM from the unraid box itself and passing through the good gfx card. How are you passing the mouse/keyboard? are you just selecting them in the vm config screen? Have you tried passing through the entire usb controller that they are connected to? Be careful to follow this guide closely as you dont want to forward the usb controller being used by your unraid usb drive https://forums.lime-technology.com/topic/35112-guide-passthrough-entire-pci-usb-controller/ Another thing to try is Libvirt Hotplug USB. Which you probably want anyway for connecting usb flash drives. https://forums.lime-technology.com/topic/45537-plug-in-hotplug-usb-for-virtual-machines/ I THINK that Libvirt Hotplug USB is also available on Community Applications which is a total must for getting plugins installed https://forums.lime-technology.com/topic/38582-plug-in-community-applications/ Edited April 20, 20179 yr by realmonster
April 21, 20179 yr Author 5 hours ago, realmonster said: I assume you're operating the VM from the unraid box itself and passing through the good gfx card. How are you passing the mouse/keyboard? are you just selecting them in the vm config screen? Have you tried passing through the entire usb controller that they are connected to? Be careful to follow this guide closely as you dont want to forward the usb controller being used by your unraid usb drive https://forums.lime-technology.com/topic/35112-guide-passthrough-entire-pci-usb-controller/ Another thing to try is Libvirt Hotplug USB. Which you probably want anyway for connecting usb flash drives. https://forums.lime-technology.com/topic/45537-plug-in-hotplug-usb-for-virtual-machines/ I THINK that Libvirt Hotplug USB is also available on Community Applications which is a total must for getting plugins installed https://forums.lime-technology.com/topic/38582-plug-in-community-applications/ Quote I assume you're operating the VM from the unraid box itself and passing through the good gfx card. Yes Quote How are you passing the mouse/keyboard? are you just selecting them in the vm config screen? I passthruogh 2 port on my motherboard,I plug a USB 3.0 hub in it,and plug the keyboard,mouse,usb mic,etc in the hub Quote I THINK that Libvirt Hotplug USB is also available on Community Applications which is a total must for getting plugins installed I try that now
April 21, 20179 yr 16 hours ago, TheBlueKingLP said: I passthruogh 2 port on my motherboard,I plug a USB 3.0 hub in it,and plug the keyboard,mouse,usb mic,etc in the hub By ports do you mean controllers? I think you need to passthrough the entire controler. Try not using the hub, see if that changes anything. I had a problem with my USB 3 hub as well (Orico brand). I ended up using that libvirt hotplug plugin whenever I plugged a usb device in. Obviously this isn't a solution to the problem, but it could give you an idea where the problem might lie.
April 22, 20179 yr Author 9 hours ago, realmonster said: By ports do you mean controllers? I think you need to passthrough the entire controler. Try not using the hub, see if that changes anything. I had a problem with my USB 3 hub as well (Orico brand). I ended up using that libvirt hotplug plugin whenever I plugged a usb device in. Obviously this isn't a solution to the problem, but it could give you an idea where the problem might lie. i passthrough a controller for usb 3.0,i plug mu boot drive in usb 2.0 port
Archived
This topic is now archived and is closed to further replies.