mukow Posted May 16, 2017 Share Posted May 16, 2017 Hi All, I am trying to attach a 3D Printer (wanhao i3 plus) to unRAID to then pass through to a Docker (http://octoprint.org/). Connecting the printer I can see the USB device attached; Bus 001 Device 006: ID 1a86:7523 QinHeng Electronics HL-340 USB-Serial adapter But I never see a driver assigning a TTYUSB0 or TTYACM0. From my research this uses a CH341/CH340 driver which I do not believe is included in unRAID. I have had a look at compiling Kernals but I think this is over my head, any help would be appreciated. Quote Link to comment
mukow Posted May 28, 2017 Author Share Posted May 28, 2017 Just a bump, would love to see support for this driver added. I can see that this has happened for a similar request previously, let me know if not possible. Quote Link to comment
wisebear Posted January 18, 2018 Share Posted January 18, 2018 (edited) Another request to add extra drivers. For home automation (RF Link gateway) I use Arduino Mega 2560 with CH340G USB to TTL converter. When I connect it to unRAID 6.4.0_rc21b Arduino is recognized as: Bus 004 Device 002: ID 1a86:7523 QinHeng Electronics HL-340 USB-Serial adapter I want to pass it through to Domoticz container but setting extra paramerer as ''--device=/dev/bus/usb/004/002'' doesn't work. I suspect it is due to lack of CH340G driver in unRAID as device doesn't get assigned as TTYUSB. Am I missing something here? Is there any chance to include CH340 driver to unRAID so it could be more for appropriate as a base OS for DIY home automation projects? Edited January 19, 2018 by wisebear Quote Link to comment
wisebear Posted January 20, 2018 Share Posted January 20, 2018 Anyone here with CH340 chip properly assigned and working on unRAID? I have replaced USB cable and tried with USB 2.0 port but it doesn't help. On the other hand Arduino is detected properly under Windows. Do you have any idea what else to try? Quote Link to comment
gareth_iowc Posted January 28, 2018 Share Posted January 28, 2018 i'm also not having any luck passing rf link to docker domoticz Quote Link to comment
janabimustafa Posted February 27, 2018 Share Posted February 27, 2018 Hello. I signed up to also ask for this. Thanks! Quote Link to comment
saarg Posted February 27, 2018 Share Posted February 27, 2018 Try sending an email to limetech and ask for the module to be included. Quote Link to comment
janabimustafa Posted February 28, 2018 Share Posted February 28, 2018 What's their email? Thanks Quote Link to comment
saarg Posted February 28, 2018 Share Posted February 28, 2018 52 minutes ago, janabimustafa said: What's their email? Thanks Really? The contact us link just a little below and to the right of your post is not good enough? Quote Link to comment
EvilSpice Posted February 8, 2019 Share Posted February 8, 2019 just stumbled upon this topic on using octoprint in docker with unraid - how do i do that? i don't understand how to add that docker if it isn't in an unraid-compatible repository. i would appreciate any instructions and links you could share. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.