May 17, 20179 yr Hi all, I'm rebuilding a drive from parity after having some issues with a drive that some of you helped me with the other day. Being the foolish person that i am, i decided to tinker with the network settings while the rebuild was going on and change the IP of the box, since i previously had to change it to DHCP to fix some network issues. That being said, when i reset the IP to static all of a sudden i can't ping anything from the unraid box anymore, not even the loopback address. i tried doing a "/etc/rc.d/rc.inet1 restart", but it didn't seem to work. That's fine, a reboot will probably clear it up, but i can't do that until the parity rebuild is done. So, other than watching the drive lights and waiting for them to stop blinking, is there a way from the console that i can watch the progress of the rebuild? Thanks!
May 17, 20179 yr Run the command mdcmd status It will generate a long list of status info. Of particular interest to parity checks (and I assume drive rebuilds) are the following ... mdResyncPrcnt mdResyncFinish mdResyncSpeed mdResyncPos
Archived
This topic is now archived and is closed to further replies.