supawiz6991 Posted April 4, 2023 Share Posted April 4, 2023 Hi, I'm trying to limit the memory available to the container using --memory=4G but this results in an error: set_mempolicy: Operation not permitted and the conversion process ends prematurely. If I try in privileged mode it resolves the error but the conversion still ends prematurely. If i remove --memory=4G then both the error is resolved and the conversion process runs properly. Any idea what is going on? Quote Link to comment
ApfelBirneKreis Posted April 30, 2023 Share Posted April 30, 2023 is there a way to get the newest nightly with the container? it has Dolby Vision support. Quote Link to comment
ApfelBirneKreis Posted May 2, 2023 Share Posted May 2, 2023 is this forum dead? Quote Link to comment
trurl Posted May 4, 2023 Share Posted May 4, 2023 On 4/30/2023 at 8:07 AM, ApfelBirneKreis said: is there a way to get the newest nightly with the container? Did you read the documentation linked in first post in this thread? Quote Link to comment
ApfelBirneKreis Posted May 4, 2023 Share Posted May 4, 2023 23 hours ago, trurl said: Did you read the documentation linked in first post in this thread? Yes i did. and the dev-latest tag does not work anymore. last time it was updated is a very long time ago Quote Link to comment
Djoss Posted May 22, 2023 Author Share Posted May 22, 2023 On 5/4/2023 at 7:53 PM, ApfelBirneKreis said: Yes i did. and the dev-latest tag does not work anymore. last time it was updated is a very long time ago Forgot to reply here, but nightly builds are working again. Quote Link to comment
Gunny Posted May 23, 2023 Share Posted May 23, 2023 23 hours ago, Djoss said: Forgot to reply here, but nightly builds are working again. So I tried the nightly build and I'm getting approximately 50% slower encodes on the nightly build compared to the latest build. Are nightly builds of handbrake inherently slower or do you think theres an issue on my side? I timed it and by a set amount of time latest was at 10.2% complete, and on the exact same file, exact same encoding settings, nightly was at 5.5% complete. Still waiting for nightly to finish its run so I can collect the activity logs. Quote Link to comment
Djoss Posted May 24, 2023 Author Share Posted May 24, 2023 On 5/23/2023 at 9:36 AM, Gunny said: Are nightly builds of handbrake inherently slower or do you think theres an issue on my side? It's probably an issue with HandBrake itself... Quote Link to comment
snowboardjoe Posted May 31, 2023 Share Posted May 31, 2023 (edited) Using v1.6.1 and while auto processing of watch queues is working to encode files, it's no longer removing them from the watch directory on successful completion. Anyone else seeing this? It's worked great for years, but this is gumming up my process now and have to delete files manually (my script won't populate a new one until it's empty). AUTOMATED_CONVERSION_KEEP_SOURCE is still set to 0. I've also noticed as new items are added manually to the watch folder they are not getting processed. I have to restart the container to get it to start converting. Nothing in the logs showing any issues. Auto conversion process is pretty much dead at this point. Edited May 31, 2023 by snowboardjoe Quote Link to comment
snowboardjoe Posted June 1, 2023 Share Posted June 1, 2023 On 5/31/2023 at 8:09 AM, snowboardjoe said: Using v1.6.1 and while auto processing of watch queues is working to encode files, it's no longer removing them from the watch directory on successful completion. Anyone else seeing this? It's worked great for years, but this is gumming up my process now and have to delete files manually (my script won't populate a new one until it's empty). AUTOMATED_CONVERSION_KEEP_SOURCE is still set to 0. I've also noticed as new items are added manually to the watch folder they are not getting processed. I have to restart the container to get it to start converting. Nothing in the logs showing any issues. Auto conversion process is pretty much dead at this point. This was resolved by rebooting the UNRAID host. Unknown on root cause of this. HB now completes the post processing steps after successfully auto encoding a file. The workaround (until I rebooted) was to manually clear the watch folder, stage a few file and then restart HB to have it start encoding again. Guessing this is an UNRAID OS (v6.11.5) or Docker bug. Quote Link to comment
supawiz6991 Posted June 3, 2023 Share Posted June 3, 2023 On 4/4/2023 at 3:41 AM, supawiz6991 said: Hi, I'm trying to limit the memory available to the container using --memory=4G but this results in an error: set_mempolicy: Operation not permitted and the conversion process ends prematurely. If I try in privileged mode it resolves the error but the conversion still ends prematurely. If i remove --memory=4G then both the error is resolved and the conversion process runs properly. Any idea what is going on? Still looking for a resolution to this. Quote Link to comment
Gunny Posted June 6, 2023 Share Posted June 6, 2023 On 6/3/2023 at 12:59 AM, supawiz6991 said: Still looking for a resolution to this. Do you have multiple NUMA nodes? Quote Link to comment
supawiz6991 Posted June 7, 2023 Share Posted June 7, 2023 23 hours ago, Gunny said: Do you have multiple NUMA nodes? I had to look up what NUMA nodes was as this as a new concept for me. I've done nothing with NUMA Nodes and running Numactl --hardware says: available: 1 nodes (0) node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 node 0 size: 32028 MB node 0 free: 6008 MB node distances: node 0 0: 10 If I'm interpreting this correctly, then I do not have multiple NUMA Nodes. Quote Link to comment
Jaybau Posted July 6, 2023 Share Posted July 6, 2023 (edited) Might anyone else be having this problem with the docker? "Crash when opening a file" https://github.com/jlesage/docker-handbrake/issues/254 The potential work around mentions changing the docker/container's host processors type. Where would I make this change? What would I change it to ("host"?) ? Thank you. Edited July 6, 2023 by Jaybau Quote Link to comment
Vaulter98c Posted July 18, 2023 Share Posted July 18, 2023 (edited) Figured I would try here. Ran through every mention of folder in the readme, as well as about a dozen pages of this thread before I got bored (the word folder is used a lot lol). Everything seems to be working fine, ran a test encode and it came out as it should using my config from the desktop version, but I was wondering, is there a way to ensure the output is put into a folder? For example I put a folder with sub files and the movie into the watch folder, it moved the subs as its setup to do, but it just dumps them into the output folder one by one. Is there a way to ensure that each job is put into a folder matching the name of the folder it came out of or the name of the video file when done encoding? Huge thanks for this by the way, I've been doing my encodes for what feels like 2 decades the old fashioned way in Windows, this makes things much easier on my new server, should have set this up years ago lol EDIT - Fixed my second issue (selecting all tracks by default) https://handbrake.fr/docs/en/latest/advanced/audio-subtitle-defaults.html Edited July 22, 2023 by Vaulter98c Quote Link to comment
Djoss Posted July 23, 2023 Author Share Posted July 23, 2023 On 7/18/2023 at 2:17 AM, Vaulter98c said: Is there a way to ensure that each job is put into a folder matching the name of the folder it came out of or the name of the video file when done encoding? Yes, edit container settings and set "Automatic Video Converter: Output Subdirectory" to "SAME_AS_SRC". 1 Quote Link to comment
EC28 Posted August 13, 2023 Share Posted August 13, 2023 Hey guys, so I will preface this by saying the hook and scripting process is over my head, so I need a lot of help here. I am looking for a simple way to send a notification to autoscan after the conversion is complete to notify Plex to look for the file. I'd also like to rename it, though I can use Filebot for that possible if it's not easy to do. Is there anyone that's willing to teach me a bit about this? I'd love to learn how to do it correctly. Thank you! Quote Link to comment
stefan marton Posted September 7, 2023 Share Posted September 7, 2023 is possible with the autorip file to maintain all audio track and subtitles ? now all the ripped file from watch folder have only first audio track and no subtitles Quote Link to comment
Djoss Posted September 10, 2023 Author Share Posted September 10, 2023 On 9/7/2023 at 12:08 PM, stefan marton said: is possible with the autorip file to maintain all audio track and subtitles ? now all the ripped file from watch folder have only first audio track and no subtitles Yes, you just need to configure your preset to keep all tracks. This is basically under the Audio/Subtitles tab, then "Track Selection". Quote Link to comment
aqua Posted September 28, 2023 Share Posted September 28, 2023 (edited) This used to work fine for me and it has been a while since I used it but now I am getting errors when trying to add to queue or start and encode regarding the Destination "Can not read or write the directory". I've tried different directories, running docker safe new permissions, changing the path, using just the default output path etc. and so far no solutions. Any suggestions? I'm on 6.11.5. Edit: I removed the container and deleted the image, then deleted the appdata folder for it and reinstalled with same settings and things are working again. Edited September 28, 2023 by aqua Quote Link to comment
cbr600ds2 Posted September 30, 2023 Share Posted September 30, 2023 (edited) Did anyone lose access to the GUI to do manual encodes? the top option is now console which speaks for itself. Autoconverting still seems to work... Actually I can access via manually inputting. It just doesn't come up in context menu *shrug* Edited September 30, 2023 by cbr600ds2 Quote Link to comment
alturismo Posted September 30, 2023 Share Posted September 30, 2023 2 hours ago, cbr600ds2 said: Actually I can access via manually inputting. It just doesn't come up in context menu *shrug* assuming you mean the "link from clicking the Docker icon" is gone ... may take a look if this is still filled in your docker setting from handbrake (of course with handbrake value) thats what is creating the link ... 1 Quote Link to comment
cbr600ds2 Posted October 3, 2023 Share Posted October 3, 2023 On 9/29/2023 at 11:52 PM, alturismo said: assuming you mean the "link from clicking the Docker icon" is gone ... may take a look if this is still filled in your docker setting from handbrake (of course with handbrake value) thats what is creating the link ... Thanks! I'll have to check after my data rebuild. I did see it was pointing to a different port than what I have mine at so I'm pretty sure that's it. Quote Link to comment
culilaren Posted October 28, 2023 Share Posted October 28, 2023 Updata to the :latest, tried to use QSV to decorde and conversion, i add video to watch, after less than 1 minute, i got a 44b mp4, it just dosen't work. how to solve that? Quote Link to comment
culilaren Posted October 30, 2023 Share Posted October 30, 2023 On 10/29/2023 at 1:33 AM, culilaren said: Updata to the :latest, tried to use QSV to decorde and conversion, i add video to watch, after less than 1 minute, i got a 44b mp4, it just dosen't work. how to solve that? @Djoss Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.