May 25, 20179 yr Author Specifically the SMART1500LCD https://www.amazon.com/Tripp-Lite-1500VA-Rack-Mount-SMART1500LCD/dp/B000DZRY9C/ref=sr_1_2?s=electronics&ie=UTF8&qid=1495727214&sr=1-2&keywords=tripp+lite+ups
May 25, 20179 yr It is supported by Nut. Protocol is open so there is _possibly_ some support with apcupsd using 'usb' for type and cable.
May 25, 20179 yr Author Haha so basically maybe? Well at least I know its on the list now and it wouldn't be a complete guess.
May 25, 20179 yr Nut is available as a plugin so you would have support through that. For the built-in apcupsd in unRAID, yes, that is a maybe.
May 25, 20179 yr I have an older rackmount and it never worked right. Even using nut. It was one of the little SMART500RT1U units. It has been replaced by a APC SmartUPS 1000. None of them I paid for. So I would never actually pay for a triplite if I wanted to use it for UnRaid Edited May 25, 20179 yr by allischalmersman
May 26, 20179 yr Older model perhaps? From the link above: "Tripp Lite" "ups" "2" "SMART500RT1U" "USB (older; product ID 0001, protocol 3005)" "tripplite_usb" "Tripp Lite" "ups" "3" "SMART500RT1U" "USB (newer; protocol/product ID 3005)" "usbhid-ups" '2': based on fragments of publicly available protocol '3': based on publicly available protocol
June 10, 20179 yr Author Well I ended up buying the one I linked above and it works fine with the unraid ups settings. I do have nut installed but I am not using it.
June 12, 20179 yr Author On 6/10/2017 at 4:34 PM, unevent said: Configured usb for type and cable, or? Yep, both as USB.
July 7, 20178 yr I am looking at this one as well. Have you had a power outage and have it shut down correctly? my UPS went bad and causing my server to go down a lot recently.
Archived
This topic is now archived and is closed to further replies.