Jump to content

OS Lockups, unable to find cause


RevAtB

Recommended Posts

Well its a quandary, 1st time the lockup happened I figured it was a bad bios install, dirty fan etc...so the server it got the full clean, reseat of all connectors, 36hrs memtest, all cables checked under good lighting and a loop checking for cracks. It is in a UPS, and cable is attached to the USB port. Pushbullet is configured and I do get returned from UPS alerts when storms come thru so that is working.

Then again it locked up...and its always indicative that the case fan is on full speed, and of course Plex isn't accessible, yet nothing in the IPMI sensor logs (It is on an AsRock Rack C2750 server board.)

The marvel controller has had the update to prevent it from dropping the drives offline, I even did the flash of it all a 2nd time to really make sure it all showed success.

 

Attached are all the logs from the Troubleshooting mode of FCP just before each lockup, my Dmesgs, and the FCPsyslog_tails files.

 

Any insight from the experts will be appreciated.

 

Brightest Blessings,

 

Rev

dmesg.05302017

dmesg.05312017

FCPsyslog_tail.05.31.2017.txt

FCPsyslog_tail.txt.jae

jbe.uncube-diagnostics-20170513-0510.zip

jbe.uncube-diagnostics-20170530-1115.zip

jbe.uncube-diagnostics-20170531-1620.zip

syslog.05302017.1119

Link to comment

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...