June 2, 20179 yr Today I came home from work to find my unRAID server completely unresponsive, and while I get it online again just hoped someone would look over the logs to see if there is an obvious reason why. Things I did to test the server before hard shutdown: 1. Tried to load web admin. No response just spinning browser wait. 2. SSH to server. Got login prompt but after entering password never returned a prompt to enter commands 3. HP iLO connection to console. Got login prompt but after entering password never returned a prompt to enter commands (same as SSH). 4. momentary power button press (through iLO). Saw message on console & SSH warning of shutdown but nothing stopped and the server did not do clean shutdown (waited 15 minutes) 5. disconnected network cables. waited a minute connected one, repeated logon attempts, nothing so tried with other network connection, nothing. 6. Hard power off I saved the first diagnostics after power on but before starting the array but then realised I should probably start the array so have done so in maintenance mode, then stopped, done a clean reboot, started the array in normal mode and then grabbed the diagnostics again. It is about now I wish there was a way to start the array with the disks being mounted but prevent my docker images from starting automatically. Everything seems to have come up ok, but just starting a parity check (not writing changes) to make sure all the disks are OK. If anyone has any suggestions for me to check, fix or otherwise I would appreciate it. David davidserver-diagnostics-20170602-2017.zip davidserver-diagnostics-20170602-2028.zip
Archived
This topic is now archived and is closed to further replies.