lovingHDTV Posted October 26, 2018 Share Posted October 26, 2018 (edited) NM - I got it fixed. I wish you could modify the account settings and not have to remove/replace the accounts. My ports changed. I've been needing to do this for a while, now it is done thanks Edited October 26, 2018 by lovingHDTV Quote Link to comment
dlandon Posted October 26, 2018 Author Share Posted October 26, 2018 9 hours ago, lovingHDTV said: NM - I got it fixed. I wish you could modify the account settings and not have to remove/replace the accounts. My ports changed. I've been needing to do this for a while, now it is done thanks Install the Oauth2 app from the Market for better security. Quote Link to comment
lovingHDTV Posted October 26, 2018 Share Posted October 26, 2018 6 hours ago, dlandon said: Install the Oauth2 app from the Market for better security. That was straightforward. thanks for the suggestion Quote Link to comment
PeterDKM Posted October 26, 2018 Share Posted October 26, 2018 On 10/25/2018 at 8:40 PM, dlandon said: You just updated the docker today? Yes - i update every 6 months or so. Quote Link to comment
dlandon Posted October 26, 2018 Author Share Posted October 26, 2018 41 minutes ago, PeterDKM said: Yes - i update every 6 months or so. I would delete the docker and then add it back. Quote Link to comment
Joop Posted November 1, 2018 Share Posted November 1, 2018 I can't seem to get https to work for OwnCloud. Do you have any guidance or instruction on how to get it running? Quote Link to comment
dlandon Posted November 1, 2018 Author Share Posted November 1, 2018 42 minutes ago, Joop said: I can't seem to get https to work for OwnCloud. Do you have any guidance or instruction on how to get it running? Be sure to use all the defaults in the docker template. Don't make any networking or port adjustments until the docker is working. After you install the docker, left click on the icon and choose WebUI. You will be taken to the UI. You will be using https and you'll see the url to get to the docker. Once you've done that, you can make network and port changes to the docker. Quote Link to comment
cracksilver Posted December 5, 2018 Share Posted December 5, 2018 Hi there Just installed owncloud the second time with the same error. After setting user, pwd and db settings in the WebGUI the browser runs about 1 min. then I get 504 Gateway Time-out nginx/1.15.6 After restart docker there is the same story, no webgui at all... did I something wrong? thx for helping me cracksilver Quote Link to comment
dlandon Posted December 5, 2018 Author Share Posted December 5, 2018 1 hour ago, cracksilver said: Hi there Just installed owncloud the second time with the same error. After setting user, pwd and db settings in the WebGUI the browser runs about 1 min. then I get 504 Gateway Time-out nginx/1.15.6 After restart docker there is the same story, no webgui at all... did I something wrong? thx for helping me cracksilver Look at the ownCloud log - appdata/ownCloud/log/nginx and see if there is any indication there of what is going on. Quote Link to comment
cracksilver Posted December 6, 2018 Share Posted December 6, 2018 (edited) thx. see below. Both (server + client) are in the same network... error.log 2018/12/06 07:06:37 [error] 386#386: *25 upstream timed out (110: Connection timed out) while reading response header from upstream, client: 192.168.1.179, server: _, request: "GET / HTTP/1.1", upstream: "fastcgi://unix:/run/php/php7.1-fpm.sock", host: "192.168.1.121:8443", referrer: "http://192.168.1.121/Docker" access.log 192.168.1.179 - - [06/Dec/2018:07:06:37 +0100] "GET / HTTP/1.1" 504 569 "http://192.168.1.121/Docker" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_13_6) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/70.0.3538.110 Safari/537.36" cracksilver Edited December 6, 2018 by cracksilver Quote Link to comment
dlandon Posted December 6, 2018 Author Share Posted December 6, 2018 4 hours ago, cracksilver said: thx. see below. Both (server + client) are in the same network... error.log 2018/12/06 07:06:37 [error] 386#386: *25 upstream timed out (110: Connection timed out) while reading response header from upstream, client: 192.168.1.179, server: _, request: "GET / HTTP/1.1", upstream: "fastcgi://unix:/run/php/php7.1-fpm.sock", host: "192.168.1.121:8443", referrer: "http://192.168.1.121/Docker" access.log 192.168.1.179 - - [06/Dec/2018:07:06:37 +0100] "GET / HTTP/1.1" 504 569 "http://192.168.1.121/Docker" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_13_6) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/70.0.3538.110 Safari/537.36" cracksilver Are you using the default template settings for networking? Use the default Docker template settings and then make changes after you have it running. Left click on the Docker icon and then choose WebUI to access ownCloud. It looks like you are accessing ownCloud with http://. You have to use https://. Quote Link to comment
cracksilver Posted December 6, 2018 Share Posted December 6, 2018 Are you using the default template settings for networking? Use the default Docker template settings and then make changes after you have it running. Left click on the Docker icon and then choose WebUI to access ownCloud. It looks like you are accessing ownCloud with http://. You have to use https://.I think so. Did not anything change before I installed the docker.So where I can change that now?Gesendet von meinem ONEPLUS A5000 mit Tapatalk Quote Link to comment
dlandon Posted December 6, 2018 Author Share Posted December 6, 2018 1 minute ago, cracksilver said: I think so. Did not anything change before I installed the docker. So where I can change that now? Gesendet von meinem ONEPLUS A5000 mit Tapatalk Left click the docker icon and then click the WebUI and see if you can get to ownCloud. Quote Link to comment
cracksilver Posted December 6, 2018 Share Posted December 6, 2018 1 minute ago, dlandon said: Left click the docker icon and then click the WebUI and see if you can get to ownCloud. Thats exactly the step it isn't working. Then I get 504 timeout. Quote Link to comment
dlandon Posted December 6, 2018 Author Share Posted December 6, 2018 41 minutes ago, cracksilver said: Thats exactly the step it isn't working. Then I get 504 timeout. What does the url show? Quote Link to comment
cracksilver Posted December 6, 2018 Share Posted December 6, 2018 What does the url show?https://192.168.1.121:8443Gesendet von meinem ONEPLUS A5000 mit Tapatalk Quote Link to comment
dlandon Posted December 6, 2018 Author Share Posted December 6, 2018 3 hours ago, cracksilver said: https://192.168.1.121:8443 Gesendet von meinem ONEPLUS A5000 mit Tapatalk You probably need to set a static ip. Quote Link to comment
cracksilver Posted December 6, 2018 Share Posted December 6, 2018 I did it allready. See attached. Also tested without https only with http. Is not working yet... Quote Link to comment
dlandon Posted December 6, 2018 Author Share Posted December 6, 2018 No you haven't. Get back to the 'Basic' mode and set the 'Network Type' to 'Custom: br0'. Set the 'Fixed IP address' field to your desired IP address. Be sure the IP address does not conflict with other static IP addresses on your network The WebUI port has to be 443. Http:// access is denied. You can only use https://. Example: If you don't know how to do this simple networking, then you should reconsider using ownCloud, especially if you want to access it outside your network. The ownCloud Docker itself is pretty secure, but you have to be careful mapping external ports to the internal network. Quote Link to comment
cracksilver Posted December 6, 2018 Share Posted December 6, 2018 thx. just need internal networking. No worries. It is all behind 2 NAT and firewall. Did like you wrote. Now I get orphan image ... ;-( Quote Link to comment
dlandon Posted December 6, 2018 Author Share Posted December 6, 2018 (edited) 26 minutes ago, cracksilver said: thx. just need internal networking. No worries. It is all behind 2 NAT and firewall. Did like you wrote. Now I get orphan image ... ;-( What is an orphan image? Please show a screen shot. Edited December 6, 2018 by dlandon Quote Link to comment
Squid Posted December 6, 2018 Share Posted December 6, 2018 13 minutes ago, cracksilver said: Now I get orphan image ... ;-( Post the docker run command (See first link in Docker FAQ). An orphaned image only happens when an error occurs on the docker run. They can be safely deleted at any time Quote Link to comment
cracksilver Posted December 6, 2018 Share Posted December 6, 2018 This is the orphan image after i changed to br0. Docker run command is not visible anymore.. Quote Link to comment
Squid Posted December 6, 2018 Share Posted December 6, 2018 36 minutes ago, cracksilver said: Docker run command is not visible anymore.. On 5/26/2017 at 12:03 PM, Squid said: I need help with an application? What information should I supply? . . . At the very least, you should post the docker "run" command that will appear when you install / edit the application (you can always make any change and then change it back and hit "Apply" to get the docker run command to appear Quote Link to comment
cracksilver Posted December 6, 2018 Share Posted December 6, 2018 Now I reinstalled the docker: Choosed network type br0 and the IP 192.168.1.25 (it is free in my LAN) Ping from a client to 192.168.1.25 works fine Config Page looks like this: Same issue 504 gateway timeout. Just to say, everything else on unraid works fine. No problems at all. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.