I'm not shure if this is the right place to ask somethink but....

i have a dual xeon server with 48gb ram (overkill) and i want do run some vms but it doesent detect my two GPUs (gt620,gt610) . Are thise card the problem and are they supportet ?

Would it work with two quadro 600 ore 2000 ?? 

Are there some cheap cards how work (single slot).

And i got an other question (not that important) how can i share folders like i can googel drive without using googel drive.

pls help me 

thanks

 

ps my English is not the best

data-server-diagnostics-20170607-1658.zip

Unraid does see your GPUs. From your syslog it doesn't look like you have vt-d enabled in the bios or your motherboard doesn't support it.

Which server do you have?

hp server with dual xeon L5630 similar to the HP ProLiant DL360 G6 Server but with 4  3.5

and i did activate it or and i'm sure it saved it with F10

 

What does it say under iommu when you click info in the webgui?

iommu ?

Just click info in the webgui and tell me what it says after iommu.

Model: Custom two xeons 48Gb ram 14TB

M/B: -

CPU: Intel® Xeon® CPU L5630 @ 2.13GHz

HVM: Enabled

IOMMU: Disabled

Cache: 128 kB, 128 kB, 1024 kB, 1024 kB, 12288 kB, 12288 kB

Memory: 48 GB (max. installable capacity 384 GB)

Network: bond0: fault-tolerance (active-backup), mtu 1500 
 eth0: 1000 Mb/s, full duplex, mtu 1500 
 eth1: not connected

Kernel: Linux 4.9.30-unRAID x86_64

OpenSSL: 1.0.2k

But vt-b is activated. 

 

There was some issues with some HP servers, but then iommu was enabled. 

You could try adding this to the syslinux.cfg after append. 

intel_iommu=on

 

Also check again that everything vt-d is enabled in the bios. 

it is enabled in the bios

 how can I add intel_iommun=on

help pls ?

1 hour ago, aurel said:

help pls ?

 

See Saarg's message that was just above yours:

 

On 6/12/2017 at 6:07 PM, saarg said:

There was some issues with some HP servers, but then iommu was enabled. 

You could try adding this to the syslinux.cfg after append. 

intel_iommu=on

 

Also check again that everything vt-d is enabled in the bios. 

Emphasis added

 

If you're not comfortable editing the file in Linux, you can power down the server, stick the flash drive in a Win/Mac machine and make the edit there. Just be sure that if you're using a Win PC that you use an editor that will preserve the Linux line breaks. (Notepad++ is free and will do just that for you. Not affiliated, just a happy user.)

Or you can edit it in the webgui of unraid. When on the main tab, click Flash and you get to an editor for the syslinux.cfg file. 

Where do i habe to put it ? After what ?

default /syslinux/menu.c32
menu title Lime Technology, Inc.
prompt 0
timeout 50
label unRAID OS
  menu default
  kernel /bzimage
  append initrd=/bzroot
label unRAID OS GUI Mode
  kernel /bzimage
  append initrd=/bzroot,/bzroot-gui
label unRAID OS Safe Mode (no plugins, no GUI)
  kernel /bzimage
  append initrd=/bzroot unraidsafemode
label unRAID OS GUI Safe Mode (no plugins)
  kernel /bzimage
  append initrd=/bzroot,/bzroot-gui unraidsafemode
label Memtest86+
  kernel /memtest

You add it after append and before initrd on the 8th line. 

default /syslinux/menu.c32
menu title Lime Technology, Inc.
prompt 0
timeout 50
label unRAID OS
  menu default
  kernel /bzimage
  append intel_iommu=on initrd=/bzroot
label unRAID OS GUI Mode
  kernel /bzimage
  append initrd=/bzroot,/bzroot-gui
label unRAID OS Safe Mode (no plugins, no GUI)
  kernel /bzimage
  append initrd=/bzroot unraidsafemode
label unRAID OS GUI Safe Mode (no plugins)
  kernel /bzimage
  append initrd=/bzroot,/bzroot-gui unraidsafemode
label Memtest86+
  kernel /memtest
 

like this  ?

it did not work

Then you haven't enabled everything in the bios or some of your hardware does not support vt-d. 

It is enebled in the bios 

and there is nothink in the machin exept the cpu, ram and hdd

so i don't know what sould not support it ?

It's either a setting you are missing in the bios, your motherboard doesn't support it, broken bios or your CPU doesn't support it. Is your CPU an engineering sample?

You are not using the GUI boot mode right?

 

Is your installed bios the latest available? Probably should try to update.

Ouu yeah that could be the problem it is from 2014

On 6/10/2017 at 3:46 PM, saarg said:

Just click info in the webgui and tell me what it says after iommu.

This option is no longer available in Unraid 6.7.2. Can you please tell me where this information is now located? I have the same problem with it not seeing my GPU

58 minutes ago, frakman1 said:

This option is no longer available in Unraid 6.7.2. Can you please tell me where this information is now located? I have the same problem with it not seeing my GPU

It's still there.

49 minutes ago, saarg said:

It's still there.

Thanks. I see it now.