aurel Posted June 7, 2017 Share Posted June 7, 2017 I'm not shure if this is the right place to ask somethink but.... i have a dual xeon server with 48gb ram (overkill) and i want do run some vms but it doesent detect my two GPUs (gt620,gt610) . Are thise card the problem and are they supportet ? Would it work with two quadro 600 ore 2000 ?? Are there some cheap cards how work (single slot). And i got an other question (not that important) how can i share folders like i can googel drive without using googel drive. pls help me thanks ps my English is not the best data-server-diagnostics-20170607-1658.zip Quote Link to comment
saarg Posted June 7, 2017 Share Posted June 7, 2017 Unraid does see your GPUs. From your syslog it doesn't look like you have vt-d enabled in the bios or your motherboard doesn't support it. Which server do you have? Quote Link to comment
aurel Posted June 8, 2017 Author Share Posted June 8, 2017 hp server with dual xeon L5630 similar to the HP ProLiant DL360 G6 Server but with 4 3.5 and i did activate it or and i'm sure it saved it with F10 Quote Link to comment
saarg Posted June 9, 2017 Share Posted June 9, 2017 What does it say under iommu when you click info in the webgui? Quote Link to comment
saarg Posted June 10, 2017 Share Posted June 10, 2017 Just click info in the webgui and tell me what it says after iommu. Quote Link to comment
aurel Posted June 12, 2017 Author Share Posted June 12, 2017 Model: Custom two xeons 48Gb ram 14TB M/B: - CPU: Intel® Xeon® CPU L5630 @ 2.13GHz HVM: Enabled IOMMU: Disabled Cache: 128 kB, 128 kB, 1024 kB, 1024 kB, 12288 kB, 12288 kB Memory: 48 GB (max. installable capacity 384 GB) Network: bond0: fault-tolerance (active-backup), mtu 1500 eth0: 1000 Mb/s, full duplex, mtu 1500 eth1: not connected Kernel: Linux 4.9.30-unRAID x86_64 OpenSSL: 1.0.2k Quote Link to comment
aurel Posted June 12, 2017 Author Share Posted June 12, 2017 But vt-b is activated. Quote Link to comment
saarg Posted June 12, 2017 Share Posted June 12, 2017 There was some issues with some HP servers, but then iommu was enabled. You could try adding this to the syslinux.cfg after append. intel_iommu=on Also check again that everything vt-d is enabled in the bios. Quote Link to comment
aurel Posted June 12, 2017 Author Share Posted June 12, 2017 it is enabled in the bios how can I add intel_iommun=on Quote Link to comment
FreeMan Posted June 21, 2017 Share Posted June 21, 2017 1 hour ago, aurel said: help pls ? See Saarg's message that was just above yours: On 6/12/2017 at 6:07 PM, saarg said: There was some issues with some HP servers, but then iommu was enabled. You could try adding this to the syslinux.cfg after append. intel_iommu=on Also check again that everything vt-d is enabled in the bios. Emphasis added If you're not comfortable editing the file in Linux, you can power down the server, stick the flash drive in a Win/Mac machine and make the edit there. Just be sure that if you're using a Win PC that you use an editor that will preserve the Linux line breaks. (Notepad++ is free and will do just that for you. Not affiliated, just a happy user.) Quote Link to comment
saarg Posted June 21, 2017 Share Posted June 21, 2017 Or you can edit it in the webgui of unraid. When on the main tab, click Flash and you get to an editor for the syslinux.cfg file. Quote Link to comment
aurel Posted June 30, 2017 Author Share Posted June 30, 2017 Where do i habe to put it ? After what ? default /syslinux/menu.c32 menu title Lime Technology, Inc. prompt 0 timeout 50 label unRAID OS menu default kernel /bzimage append initrd=/bzroot label unRAID OS GUI Mode kernel /bzimage append initrd=/bzroot,/bzroot-gui label unRAID OS Safe Mode (no plugins, no GUI) kernel /bzimage append initrd=/bzroot unraidsafemode label unRAID OS GUI Safe Mode (no plugins) kernel /bzimage append initrd=/bzroot,/bzroot-gui unraidsafemode label Memtest86+ kernel /memtest Quote Link to comment
saarg Posted June 30, 2017 Share Posted June 30, 2017 You add it after append and before initrd on the 8th line. Quote Link to comment
aurel Posted June 30, 2017 Author Share Posted June 30, 2017 default /syslinux/menu.c32 menu title Lime Technology, Inc. prompt 0 timeout 50 label unRAID OS menu default kernel /bzimage append intel_iommu=on initrd=/bzroot label unRAID OS GUI Mode kernel /bzimage append initrd=/bzroot,/bzroot-gui label unRAID OS Safe Mode (no plugins, no GUI) kernel /bzimage append initrd=/bzroot unraidsafemode label unRAID OS GUI Safe Mode (no plugins) kernel /bzimage append initrd=/bzroot,/bzroot-gui unraidsafemode label Memtest86+ kernel /memtest like this ? Quote Link to comment
saarg Posted June 30, 2017 Share Posted June 30, 2017 Then you haven't enabled everything in the bios or some of your hardware does not support vt-d. Quote Link to comment
aurel Posted July 3, 2017 Author Share Posted July 3, 2017 It is enebled in the bios and there is nothink in the machin exept the cpu, ram and hdd so i don't know what sould not support it ? Quote Link to comment
saarg Posted July 3, 2017 Share Posted July 3, 2017 It's either a setting you are missing in the bios, your motherboard doesn't support it, broken bios or your CPU doesn't support it. Is your CPU an engineering sample? You are not using the GUI boot mode right? Quote Link to comment
Darksurf Posted July 3, 2017 Share Posted July 3, 2017 Is your installed bios the latest available? Probably should try to update. Quote Link to comment
aurel Posted July 5, 2017 Author Share Posted July 5, 2017 Ouu yeah that could be the problem it is from 2014 Quote Link to comment
frakman1 Posted September 27, 2019 Share Posted September 27, 2019 On 6/10/2017 at 3:46 PM, saarg said: Just click info in the webgui and tell me what it says after iommu. This option is no longer available in Unraid 6.7.2. Can you please tell me where this information is now located? I have the same problem with it not seeing my GPU Quote Link to comment
saarg Posted September 27, 2019 Share Posted September 27, 2019 58 minutes ago, frakman1 said: This option is no longer available in Unraid 6.7.2. Can you please tell me where this information is now located? I have the same problem with it not seeing my GPU It's still there. Quote Link to comment
frakman1 Posted September 27, 2019 Share Posted September 27, 2019 49 minutes ago, saarg said: It's still there. Thanks. I see it now. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.