Skip to content
View in the app

A better way to browse. Learn more.

Unraid

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

FX-8320 Will it be reliable?

Featured Replies

I am new to this and would like to know if an AMD FX-8320 and a GIGABYTE 78LMT-USB3 motherboard would work well with UNRAID. I am looking to build a very reliable NAS to store my Photography and Video work.

I have had the CPU and Motherboard so I'm trying to see if they would be worth keeping or selling for better hardware for a Reliable NAS. 

 

Hello and welcome -

 

I don't have direct experience with either, but from the forums I know that many people have used the FX-8320 with unRAID and a good number have used the Gigabyte 78LMT-USB3 or similar.  Combined with at least 4GB of RAM (8GB would be better) it should make a very good NAS.  The only disadvantage, if you could call it that, is that the FX-8320 is actually more than you need for a basic NAS and therefore you could build a more power efficient system with newer parts.  Since unRAID is free to try I'd setup a system with the trial license and give it a go.

I ran a FX-8320 from about 9/2013 until last month without issues, running approximately 10 dockers.  I DID have it set up water-cooled for about half that time though (not overclocked, just cooled at stock speeds).  As far as the board, I was running an ASUS M5A97 R2.0 mobo, 32gb RAM plus an Areca 1280ml for ports, and a no-name PCI video card.

 

I ran the same board with a FX8320E for years, only thing I did was put in an Intel NIC (A HP-branded i210AT).  The bonus is, the FX CPUs support ECC RAM, and the motherboard has rudimentary video built in to the chipset, so no need for a separate GPU.

No complaints with that CPU either, I run the 'E' version with has lower TDP (95 vs 125W).  Not as power efficient as more modern CPUs, but the hardware is inexpensive.  Details in my sig and also using (very) old Matrox Millennium PCI for console video.

 

Don't forget the option to downclock in bios. I have my 8350 running at 2.8Ghz for a power save. 

  • 3 weeks later...

I have the fx-8350 with a Huge air cooler on it and the system isn't stable. I'd have to recommend staying away from the fx series they are very old now. Someone was also telling me that even tho it says 8 cores it's actually 4. For past couple weeks every night I wake up my server is off. I think it's due to the CPU getting too hot

 

 

Sent from my iPhone using Tapatalk

 

3 hours ago, skyline7349 said:

I have the fx-8350 with a Huge air cooler on it and the system isn't stable. I'd have to recommend staying away from the fx series they are very old now. Someone was also telling me that even tho it says 8 cores it's actually 4. For past couple weeks every night I wake up my server is off. I think it's due to the CPU getting too hot

 

 

Sent from my iPhone using Tapatalk

 

 

Not typical, sounds like installation or other issue.  I will agree that the tech is old and are better solutions unless the price is right.  It has eight execution cores, however, a single floating point unit (FPU) is shared between two execution cores.

3 hours ago, skyline7349 said:

I think it's due to the CPU getting too hot

I agree with unevent, that sounds like an installation issue.  I'd pull the cooler, make sure the TDP is adequate for the 8350, clean up both the cooler and CPU and apply new thermal paste.  If that doesn't fix the issue then I'd keep track of CPU temps to see if that is really the issue - motherboard or PSU issues could be causing the shutdowns.

I agree with unevent, that sounds like an installation issue.  I'd pull the cooler, make sure the TDP is adequate for the 8350, clean up both the cooler and CPU and apply new thermal paste.  If that doesn't fix the issue then I'd keep track of CPU temps to see if that is really the issue - motherboard or PSU issues could be causing the shutdowns.

I've been dealing with these issues since I switched to Unraid. I've tried different coolers changed the CPU paste 3 times. Maybe I have a faulty CPU cause I've change psu already too.


Sent from my iPhone using Tapatalk

That's strange. I ran the 8350 on a Asus M5A97 R2 board for years and never had a heat issue using the craptastic stock cooler. And my chip should have ran way warmer than yours.

 

I know you've said that you hanged coolers but this CPU should not be getting hot enough to shut down. If it is, it still sounds like a cooler issue. This isn't meant to be sarcastic but make sure the coolers your using are capable of cooling your specific chip. Not all of them are.

 

A suggestion from me would be before you even get into unRAID just boot into your bios and watch your CPU temp at idle and see what it's doing.

 

 

Sent from my iPhone using Tapatalk

 

That's strange. I ran the 8350 on a Asus M5A97 R2 board for years and never had a heat issue using the craptastic stock cooler. And my chip should have ran way warmer than yours.
 
I know you've said that you hanged coolers but this CPU should not be getting hot enough to shut down. If it is, it still sounds like a cooler issue. This isn't meant to be sarcastic but make sure the coolers your using are capable of cooling your specific chip. Not all of them are.
 
A suggestion from me would be before you even get into unRAID just boot into your bios and watch your CPU temp at idle and see what it's doing.
 
 
Sent from my iPhone using Tapatalk
 

Fortunately I'm done dealing with it. I order a Ryzen processor so I will be redoing build. I've had same build for years now so I think it's time


Sent from my iPhone using Tapatalk

Fortunately I'm done dealing with it. I order a Ryzen processor so I will be redoing build. I've had same build for years now so I think it's time


Sent from my iPhone using Tapatalk



I'm with ya, I just got through building 4 new Ryzen systems this week to upgrade my FX8350's and FX4350's. For my unRAID systems of course it'll boot off the thumb drive but for my Windows machines (I don't use VM's) I said to hell with it and bought Samsung 960 evo's. Figured if I'm updating technology just as well go all the way.


Sent from my iPhone using Tapatalk



I'm with ya, I just got through building 4 new Ryzen systems this week to upgrade my FX8350's and FX4350's. For my unRAID systems of course it'll boot off the thumb drive but for my Windows machines (I don't use VM's) I said to hell with it and bought Samsung 960 evo's. Figured if I'm updating technology just as well go all the way.


Sent from my iPhone using Tapatalk

I don't mean to thread jack but I'm thread jacking. What motherboards did you go with and do you have reasons for it? I just want 0 issues lol I will be running vms 1 windows and 2 ubuntu


Sent from my iPhone using Tapatalk

I don't mean to thread jack but I'm thread jacking. What motherboards did you go with and do you have reasons for it? I just want 0 issues lol I will be running vms 1 windows and 2 ubuntu


Sent from my iPhone using Tapatalk


I went with Asus Prime X370 Pro's on all 4 machines. Reason was I run all my data drives in SAS2 JBOD chassis (non expander) so I needed/wanted the PCIe slots for my LSI 9201-16e cards over something like the B350 boards that don't have that additional slot. Also with the price difference only being $50 per board I figured why not get the better of the two anyway.

I updated the bios to 0805 I believe before I did anything and everything went smooth. No memory issues, no issues detecting the M.2 drives..


Sent from my iPhone using Tapatalk


I went with Asus Prime X370 Pro's on all 4 machines. Reason was I run all my data drives in SAS2 JBOD chassis (non expander) so I needed/wanted the PCIe slots for my LSI 9201-16e cards over something like the B350 boards that don't have that additional slot. Also with the price difference only being $50 per board I figured why not get the better of the two anyway.

I updated the bios to 0805 I believe before I did anything and everything went smooth. No memory issues, no issues detecting the M.2 drives..


Sent from my iPhone using Tapatalk

Ok cool thanks so much looks like I'll be getting that one


Sent from my iPhone using Tapatalk

I'm happy enough with my PRIME X370-Pro too.  The Crosshair is too expensive, and I'm never happy with any of the other manufacturer's boards.  Gigabyte is OK, but I'm more used to Asus' UEFI.  

 

I did have issues with the X370-Pro turning off and locking up, but it seems it was poor cooling on the CPU - my air cooler wasn't seating properly, and the AIO I was using was ancient so probably low on coolant.  Since I fitted a decent cooler, I've had no issues (H110iGT).

Archived

This topic is now archived and is closed to further replies.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.