Djoss Posted July 18, 2018 Author Share Posted July 18, 2018 (edited) 11 minutes ago, cybrnook said: When I set variables on a container, what I am seeing now is unRAID doesn't let you then view what you have set. Is there a way I can pull what parameters are currently defined (default and custom) and their values? You mean other than looking at the container settings? You can execute a command like: docker inspect -f '{{ range $p := .Config.Env }}{{ println $p }}{{end}}' MakeMKV Where "MakeMKV" is the name of the container. Edited July 18, 2018 by Djoss Quote Link to comment
cybrnook Posted July 18, 2018 Share Posted July 18, 2018 Yep Yep, I was too quick to ask. The container adds them as you add them,. I see that now..... of course after you replied ? Quote Link to comment
cybrnook Posted July 18, 2018 Share Posted July 18, 2018 (edited) It's only ripping one of the two discs that were inserted. Edited July 19, 2018 by cybrnook Quote Link to comment
Djoss Posted July 18, 2018 Author Share Posted July 18, 2018 3 minutes ago, cybrnook said: Getting close ?, let's go eject and push them back in : Looks like parallel rip is not enabled... Quote Link to comment
Djoss Posted July 18, 2018 Author Share Posted July 18, 2018 Can you provide the whole container log? Quote Link to comment
cybrnook Posted July 18, 2018 Share Posted July 18, 2018 Where can I pull that from? The view next to the container only shows what was active since the time I opened it. Quote Link to comment
Djoss Posted July 18, 2018 Author Share Posted July 18, 2018 1 minute ago, cybrnook said: Where can I pull that from? The view next to the container only shows what was active since the time I opened it. docker logs MakeMKV Quote Link to comment
Djoss Posted July 18, 2018 Author Share Posted July 18, 2018 And what is the output of "docker inspect MakeMKV" ? Quote Link to comment
Djoss Posted July 18, 2018 Author Share Posted July 18, 2018 23 minutes ago, cybrnook said: MakeMKV.inspect Redo (delete/recreate) the AUTO_DISC_RIPPER_PARALLEL_RIP variable parameter. Looks like there is a byte order mark unicode character in the name: AUTO_DISC_RIPPE<feff>R_PARALLEL_RIP Quote Link to comment
cybrnook Posted July 18, 2018 Share Posted July 18, 2018 (edited) It's working ? sorry for the noob copy/paste windows formatting error: MakeMKV.log If set to "mkv" any way to have it pick the "movie" itself out of the BS on the disc? And you should call this out in the MakeMKV default template: Edited July 18, 2018 by cybrnook Quote Link to comment
Djoss Posted July 18, 2018 Author Share Posted July 18, 2018 51 minutes ago, cybrnook said: If set to "mkv" any way to have it pick the "movie" itself out of the BS on the disc? If you click on « Show more settings », there is a field « Automatic Disc Ripper: Minimum Title Length » that you can adjust to make sure only the main movie is extracted. 1 Quote Link to comment
cybrnook Posted July 18, 2018 Share Posted July 18, 2018 (edited) You are a BOSS Jocelyn! Will you be pushing this as an official update, so I can switch back from the RC repository and get my pretty icon back? ? All worked fine: [makemkvcon-0] Current progress - 97%, Total process - 98% [makemkvcon-0] Current progress - 98%, Total process - 98% [makemkvcon-1] Current progress - 87%, Total process - 88% [makemkvcon-1] Current progress - 87%, Total process - 89% [makemkvcon-0] Current progress - 98%, Total process - 99% [makemkvcon-0] Current progress - 99%, Total process - 99% [makemkvcon-1] Current progress - 88%, Total process - 89% [makemkvcon-1] Current progress - 88%, Total process - 90% [makemkvcon-0] Backup done [makemkvcon-0] Backup done. [autodiscripper-0] Disc rip terminated successfully. [autodiscripper-0] Ejecting disc from drive 0 (/dev/sr0)... [makemkvcon-1] Current progress - 89%, Total process - 90% [makemkvcon-1] Current progress - 89%, Total process - 91% [autodiscripper-0] Disc ejected. [makemkvcon-1] Current progress - 90%, Total process - 91% [makemkvcon-1] Current progress - 90%, Total process - 92% [makemkvcon-1] Current progress - 91%, Total process - 92% [makemkvcon-1] Current progress - 91%, Total process - 93% [makemkvcon-1] Current progress - 92%, Total process - 93% [makemkvcon-1] Current progress - 92%, Total process - 94% [makemkvcon-1] Current progress - 93%, Total process - 94% [makemkvcon-1] Current progress - 94%, Total process - 94% [makemkvcon-1] Current progress - 94%, Total process - 95% [makemkvcon-1] Current progress - 95%, Total process - 95% [makemkvcon-1] Current progress - 95%, Total process - 96% [makemkvcon-1] Current progress - 96%, Total process - 96% [makemkvcon-1] Current progress - 96%, Total process - 97% [makemkvcon-1] Current progress - 97%, Total process - 97% [makemkvcon-1] Current progress - 97%, Total process - 98% [makemkvcon-1] Current progress - 98%, Total process - 98% [makemkvcon-1] Current progress - 98%, Total process - 99% [makemkvcon-1] Current progress - 99%, Total process - 99% [makemkvcon-1] Backup done [makemkvcon-1] Backup done. [autodiscripper-1] Disc rip terminated successfully. [autodiscripper-1] Ejecting disc from drive 1 (/dev/sr1)... [autodiscripper-1] Disc ejected. Edited July 18, 2018 by cybrnook Quote Link to comment
Djoss Posted July 19, 2018 Author Share Posted July 19, 2018 6 hours ago, cybrnook said: You are a BOSS Jocelyn! Will you be pushing this as an official update, so I can switch back from the RC repository and get my pretty icon back? ? Sure. Image is currently building Quote Link to comment
cybrnook Posted July 19, 2018 Share Posted July 19, 2018 Just wanted to say, auto ripping has been working great all afternoon! I think I will stick to "backup", then carve up with Handbrake, but that's just personal preference. Dual ripping has also been working great! Very convenient. Quote Link to comment
Taddeusz Posted July 19, 2018 Share Posted July 19, 2018 Does the auto ripper follow the set language settings? So if I have it set to English it will only rip those tracks. Also, it would be nice to have an option on the auto ripper to only rip forced subtitles. Quote Link to comment
Djoss Posted July 20, 2018 Author Share Posted July 20, 2018 18 hours ago, Taddeusz said: Does the auto ripper follow the set language settings? So if I have it set to English it will only rip those tracks. Also, it would be nice to have an option on the auto ripper to only rip forced subtitles. Yes the auto ripper should follow the "Default selection rule" as configured in the GUI in expert mode. Same thing for forced subtitle: you should be able to select them with the selection rule https://www.makemkv.com/forum2/viewtopic.php?f=10&t=4386#p17399 Quote Link to comment
Taddeusz Posted July 20, 2018 Share Posted July 20, 2018 4 hours ago, Djoss said: Yes the auto ripper should follow the "Default selection rule" as configured in the GUI in expert mode. Same thing for forced subtitle: you should be able to select them with the selection rule https://www.makemkv.com/forum2/viewtopic.php?f=10&t=4386#p17399 Thank you. I checked out the selection rules language. I think I have a solution already. I just need to test it when I get home. Quote Link to comment
MaxHayman Posted July 21, 2018 Share Posted July 21, 2018 (edited) Hello, So I have a bluray and dvd drive hooked up looking to do parrallel ripping. I did the following but nothing worked --device /dev/sr0 --device /dev/sr1 I then did the following and drives showed up but no auto ripping was working --device /dev/sg6 --device /dev/sg5 I then read you had to put both --device /dev/sr0 --device /dev/sg5 --device /dev/sr1 --device /dev/sg6 However no drives appear in the gui now. This is the output of --device /dev/sr0 --device /dev/sg5 [cont-init.d] 90-makemkv.sh: exited 0.[cont-init.d] 95-check-optical-drive.sh: executing...[cont-init.d] 95-check-optical-drive.sh: looking for usable optical drives...[cont-init.d] 95-check-optical-drive.sh: found optical drive [/dev/sr0, /dev/sg5], group 19.[cont-init.d] 95-check-optical-drive.sh: found optical drive [/dev/sr1, /dev/sg6], but it is not usable because:[cont-init.d] 95-check-optical-drive.sh: --> the host device /dev/sr1 is not exposed to the container.[cont-init.d] 95-check-optical-drive.sh: --> the host device /dev/sg6 is not exposed to the container.[cont-init.d] 95-check-optical-drive.sh: exited 0.[cont-init.d] 96-install-autodiscripper-srv.sh: executing...[cont-init.d] 96-install-autodiscripper-srv.sh: installing automatic disc ripper for drive 0 (HD-DVD-ROM HL-DT-ST BDDVDRW GGC-H20L 1.02)...[cont-init.d] 96-install-autodiscripper-srv.sh: exited 0.[cont-init.d] done. Edited July 21, 2018 by MaxHayman Quote Link to comment
Djoss Posted July 21, 2018 Author Share Posted July 21, 2018 1 hour ago, MaxHayman said: Hello, So I have a bluray and dvd drive hooked up looking to do parrallel ripping. I did the following but nothing worked --device /dev/sr0 --device /dev/sr1 I then did the following and drives showed up but no auto ripping was working --device /dev/sg6 --device /dev/sg5 I then read you had to put both --device /dev/sr0 --device /dev/sg5 --device /dev/sr1 --device /dev/sg6 However no drives appear in the gui now. This is the output of --device /dev/sr0 --device /dev/sg5 [cont-init.d] 90-makemkv.sh: exited 0.[cont-init.d] 95-check-optical-drive.sh: executing...[cont-init.d] 95-check-optical-drive.sh: looking for usable optical drives...[cont-init.d] 95-check-optical-drive.sh: found optical drive [/dev/sr0, /dev/sg5], group 19.[cont-init.d] 95-check-optical-drive.sh: found optical drive [/dev/sr1, /dev/sg6], but it is not usable because:[cont-init.d] 95-check-optical-drive.sh: --> the host device /dev/sr1 is not exposed to the container.[cont-init.d] 95-check-optical-drive.sh: --> the host device /dev/sg6 is not exposed to the container.[cont-init.d] 95-check-optical-drive.sh: exited 0.[cont-init.d] 96-install-autodiscripper-srv.sh: executing...[cont-init.d] 96-install-autodiscripper-srv.sh: installing automatic disc ripper for drive 0 (HD-DVD-ROM HL-DT-ST BDDVDRW GGC-H20L 1.02)...[cont-init.d] 96-install-autodiscripper-srv.sh: exited 0.[cont-init.d] done. What do you have in the log with: --device /dev/sr0 --device /dev/sg5 --device /dev/sr1 --device /dev/sg6 Quote Link to comment
MaxHayman Posted July 21, 2018 Share Posted July 21, 2018 Hi Djoss, Here it is. The blu ray is in the drive when it starts up. Quote Link to comment
Djoss Posted July 23, 2018 Author Share Posted July 23, 2018 On 7/21/2018 at 5:11 PM, MaxHayman said: Hi Djoss, Here it is. The blu ray is in the drive when it starts up. Could you provide the output of the following commands (while the container is running): docker exec MakeMKV /opt/makemkv/bin/makemkvcon -r --cache=1 info disc:9999 docker exec MakeMKV lsscsi -g -k docker exec MakeMKV ls -l /dev/ docker inspect MakeMKV Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.