clinkydoodle Posted December 22, 2020 Share Posted December 22, 2020 Thanks @Djoss Quote Link to comment
SoCold Posted December 24, 2020 Share Posted December 24, 2020 I feel like I'm missing something obvious but I'm stuck at the moment with Hashed Keys for UHD discs. I used to go to https://www.makemkv.com/forum/viewtopic.php?f=12&t=16959 and download the latest file and I was good to go. It's been a while since I have but now it looks like there is no file to manually download anymore but rather "MakeMKV automatically downloads the latest hash key file as needed, provided you have "contact the web server" enabled in your preferences" I don't see that option anywhere and searching seems to just lead to the same "My beta key stopped working" question asked a few hundred times. Hopefully it's something simple and I doubt I'm the first person to run into this. Thanks Quote Link to comment
betaman Posted December 26, 2020 Share Posted December 26, 2020 (edited) On 8/29/2020 at 10:40 AM, ur6969 said: Does anyone have any additional input on this issue? I have used the docker to rip about a dozen Blu Rays over several weeks, but over the last 3 weeks or so every rip requires an unclean (hold power button) shutdown before I can rip a second. The docker hangs and will not stop or restart when using the Unraid GUI. I can't make the docker stop or restart itself. Having a similar issue with this container. In my case, I just installed it, went to the webgui, no response, tried to restart then stop it, no response so I tried to edit it and same. Finally tried to remove it and it's completely unresponsive. I'd reboot the server but I'm in the middle of a preclear. Is there a safe way to stop it from the command line? My other dockers are working fine (ie responding to restart and stop commands) and the container log just says there's no log because docker is marked for removal. Edit: Docker became unresponsive so I had to stop and start the array. Container is gone now. Edited December 26, 2020 by betaman Quote Link to comment
BoxOfSnoo Posted December 26, 2020 Share Posted December 26, 2020 1 hour ago, betaman said: Having a similar issue with this container. In my case, I just installed it, went to the webgui, no response, tried to restart then stop it, no response so I tried to edit it and same. Finally tried to remove it and it's completely unresponsive. I'd reboot the server but I'm in the middle of a preclear. Is there a safe way to stop it from the command line? My other dockers are working fine (ie responding to restart and stop commands) and the container log just says there's no log because docker is marked for removal. Edit: Docker became unresponsive so I had to stop and start the array. Container is gone now. Did you try `docker kill <containerid>`? Quote Link to comment
betaman Posted December 26, 2020 Share Posted December 26, 2020 3 hours ago, BoxOfSnoo said: Did you try `docker kill <containerid>`? No but that’s what I was wondering - if there’s a CL command I could invoke. Quote Link to comment
BoxOfSnoo Posted December 27, 2020 Share Posted December 27, 2020 2 hours ago, betaman said: No but that’s what I was wondering - if there’s a CL command I could invoke. That would probably be it. `docker ps` will show you what’s running and `docker kill <id>` will take it down. You should be able to use the name (label) or the hex id, I think. 1 Quote Link to comment
Djoss Posted January 2, 2021 Author Share Posted January 2, 2021 On 12/24/2020 at 11:34 AM, SoCold said: I feel like I'm missing something obvious but I'm stuck at the moment with Hashed Keys for UHD discs. I used to go to https://www.makemkv.com/forum/viewtopic.php?f=12&t=16959 and download the latest file and I was good to go. It's been a while since I have but now it looks like there is no file to manually download anymore but rather "MakeMKV automatically downloads the latest hash key file as needed, provided you have "contact the web server" enabled in your preferences" I don't see that option anywhere and searching seems to just lead to the same "My beta key stopped working" question asked a few hundred times. Hopefully it's something simple and I doubt I'm the first person to run into this. Thanks With the latest version, in MakeMKV you click View->Preferences. Under the "General" tab, you have a checkbox "Enable Internet access". Quote Link to comment
Djoss Posted January 2, 2021 Author Share Posted January 2, 2021 On 11/24/2020 at 6:01 PM, BoxOfSnoo said: I've been using this container for quite a while now, successfully, but now it's coming up with the SCSI error 'ILLEGAL REQUEST:READ OF SCRAMBLED SECTOR WITHOUT AUTHENTICATION'. The devices are mapped fine, and it's running in privileged mode. The problem seems to be with the autoripper only... when I turn that off, and go in through the GUI, it logs that error but then rips perfectly fine. Is there a way to have the autoripper not give up so easily? Could you try to rip the disc manually and provide the output ? First, login to the container: docker exec -ti MakeMKV sh Then, to rip disc 0, execute: env HOME=/config /opt/makemkv/bin/makemkvcon -r --progress=-same mkv disc:0 all /output/manual_rip_test If you don't know the disc ID, you can run: /opt/makemkv/bin/makemkvcon -r --cache=1 info disc:9999 Quote Link to comment
kallen Posted January 3, 2021 Share Posted January 3, 2021 i am new to unraid but i just built my first server and i am having troubles configureing it to run makemkv. I have two asus blu ray drives and both are seen in makemkv. the problem is i am getting a region error and i dont know how to configure the region on my drives. i have googled and looked through this forum for a few hours and any help would be appreciated. also my unraid say sudo command not found and apt-get command not found and those seem to be the most common used commands for this. Quote Link to comment
Djoss Posted January 4, 2021 Author Share Posted January 4, 2021 15 hours ago, kallen said: i am new to unraid but i just built my first server and i am having troubles configureing it to run makemkv. I have two asus blu ray drives and both are seen in makemkv. the problem is i am getting a region error and i dont know how to configure the region on my drives. i have googled and looked through this forum for a few hours and any help would be appreciated. also my unraid say sudo command not found and apt-get command not found and those seem to be the most common used commands for this. Which error are you getting exactly ? Is the error preventing the disc to be ripped ? Also, what is the model of your drives ? Quote Link to comment
BoxOfSnoo Posted January 4, 2021 Share Posted January 4, 2021 15 hours ago, kallen said: i am new to unraid but i just built my first server and i am having troubles configureing it to run makemkv. I have two asus blu ray drives and both are seen in makemkv. the problem is i am getting a region error and i dont know how to configure the region on my drives. i have googled and looked through this forum for a few hours and any help would be appreciated. also my unraid say sudo command not found and apt-get command not found and those seem to be the most common used commands for this. If it's a brand new drive, the region might not be set at all. You need to run the regionset command but it's not super easy on unRAID. You can either set up a VM and pass through the device so you can do it with another OS, or plug it in another machine and set the device there. Passing through the device is explained here: The easiest would be to set it on another machine, if you have one available... it only ever needs to be done once. Quote Link to comment
BoxOfSnoo Posted January 4, 2021 Share Posted January 4, 2021 On 1/2/2021 at 11:50 AM, Djoss said: Could you try to rip the disc manually and provide the output ? First, login to the container: docker exec -ti MakeMKV sh Then, to rip disc 0, execute: env HOME=/config /opt/makemkv/bin/makemkvcon -r --progress=-same mkv disc:0 all /output/manual_rip_test If you don't know the disc ID, you can run: /opt/makemkv/bin/makemkvcon -r --cache=1 info disc:9999 Yup sadly the manual rip works as well. I mean it does complain, but it doesn't immediately eject the disk and give up. The start of the log messages are... MSG:1005,0,1,"MakeMKV v1.15.4 linux(x64-release) started","%1 started","MakeMKV v1.15.4 linux(x64-release)" PRGT:5018,0,"Scanning CD-ROM devices" PRGC:5018,0,"Scanning CD-ROM devices" PRGV:0,0,65536 PRGV:0,0,65536 PRGV:65536,0,65536 PRGV:65536,65536,65536 MSG:2003,0,3,"Error 'Scsi error - ILLEGAL REQUEST:READ OF SCRAMBLED SECTOR WITHOUT AUTHENTICATION' occurred while reading 'DVD+R-DL ATAPI DVD A DH16AASH SA15' at offset '1048576'","Error '%1' occurred while reading '%2' at offset '%3'","Scsi error - ILLEGAL REQUEST:READ OF SCRAMBLED SECTOR WITHOUT AUTHENTICATION","DVD+R-DL ATAPI DVD A DH16AASH SA15","1048576" DRV:0,2,999,1,"DVD+R-DL ATAPI DVD A DH16AASH SA15","ROBIN_HOOD_S1_D1","/dev/sr1" There's a lot more, but I don't think it's very useful? Quote Link to comment
Djoss Posted January 4, 2021 Author Share Posted January 4, 2021 12 minutes ago, BoxOfSnoo said: Yup sadly the manual rip works as well. I mean it does complain, but it doesn't immediately eject the disk and give up. The start of the log messages are... MSG:1005,0,1,"MakeMKV v1.15.4 linux(x64-release) started","%1 started","MakeMKV v1.15.4 linux(x64-release)" PRGT:5018,0,"Scanning CD-ROM devices" PRGC:5018,0,"Scanning CD-ROM devices" PRGV:0,0,65536 PRGV:0,0,65536 PRGV:65536,0,65536 PRGV:65536,65536,65536 MSG:2003,0,3,"Error 'Scsi error - ILLEGAL REQUEST:READ OF SCRAMBLED SECTOR WITHOUT AUTHENTICATION' occurred while reading 'DVD+R-DL ATAPI DVD A DH16AASH SA15' at offset '1048576'","Error '%1' occurred while reading '%2' at offset '%3'","Scsi error - ILLEGAL REQUEST:READ OF SCRAMBLED SECTOR WITHOUT AUTHENTICATION","DVD+R-DL ATAPI DVD A DH16AASH SA15","1048576" DRV:0,2,999,1,"DVD+R-DL ATAPI DVD A DH16AASH SA15","ROBIN_HOOD_S1_D1","/dev/sr1" There's a lot more, but I don't think it's very useful? Great thanks for the info. Are you getting the error a single time ? What is the message just after the error ? Quote Link to comment
BoxOfSnoo Posted January 4, 2021 Share Posted January 4, 2021 Just now, Djoss said: Great thanks for the info. Are you getting the error a single time ? What is the message just after the error ? A single time, with each disc. After that, it shows all of the DRV records, then stuff like this: PRGV:0,65536,65536 PRGV:0,0,65536 PRGT:3100,0,"Opening DVD disc" MSG:3007,0,0,"Using direct disc access mode","Using direct disc access mode" PRGC:3102,0,"Processing title sets" PRGV:0,0,65536 PRGV:0,0,65536 PRGV:6553,0,65536 PRGV:6553,2184,65536 PRGV:13107,2184,65536 PRGV:13107,4369,65536 PRGV:19660,4369,65536 PRGV:19660,6553,65536 PRGV:26214,6553,65536 PRGV:26214,8738,65536 PRGV:32768,8738,65536 PRGV:32768,10922,65536 PRGV:39321,10922,65536 PRGV:39321,13107,65536 PRGV:45875,13107,65536 PRGV:45875,15291,65536 PRGV:52428,15291,65536 PRGV:52428,17476,65536 PRGV:58982,17476,65536 PRGV:58982,19660,65536 PRGC:3103,0,"Processing titles" PRGV:0,19660,65536 More PRGV and MSG records (either "too short" or "added" messages). Then "Decrypting data", and proceeds to "Saving all titles". Normal stuff. Quote Link to comment
Djoss Posted January 4, 2021 Author Share Posted January 4, 2021 Just now, BoxOfSnoo said: A single time, with each disc. After that, it shows all of the DRV records, then stuff like this: PRGV:0,65536,65536 PRGV:0,0,65536 PRGT:3100,0,"Opening DVD disc" MSG:3007,0,0,"Using direct disc access mode","Using direct disc access mode" PRGC:3102,0,"Processing title sets" PRGV:0,0,65536 PRGV:0,0,65536 PRGV:6553,0,65536 PRGV:6553,2184,65536 PRGV:13107,2184,65536 PRGV:13107,4369,65536 PRGV:19660,4369,65536 PRGV:19660,6553,65536 PRGV:26214,6553,65536 PRGV:26214,8738,65536 PRGV:32768,8738,65536 PRGV:32768,10922,65536 PRGV:39321,10922,65536 PRGV:39321,13107,65536 PRGV:45875,13107,65536 PRGV:45875,15291,65536 PRGV:52428,15291,65536 PRGV:52428,17476,65536 PRGV:58982,17476,65536 PRGV:58982,19660,65536 PRGC:3103,0,"Processing titles" PRGV:0,19660,65536 More PRGV and MSG records (either "too short" or "added" messages). Then "Decrypting data", and proceeds to "Saving all titles". Normal stuff. Perfect. Currently, the automatic disc ripper stops for any scsi error (message code 2003). But in your scenario, the error is harmless (see https://www.makemkv.com/forum/viewtopic.php?t=961#p38393 and https://www.makemkv.com/forum/viewtopic.php?t=961#p38449). I will fix that. Thanks for your help! 1 Quote Link to comment
cap089 Posted February 12, 2021 Share Posted February 12, 2021 Hi, I justed started to begin my testings with the latest unRAID 6.9 beta and I wonder if the MakeMKV docker is compatible with it? I have added my optical drive within the extra parameters section: " --device /dev/sr0" The Docker container starts without any errors but MakeMKV do not regognize any optical drive. I have also tested it with " --device /dev/sr0 --device /dev/sg0", but no luck. I can remember that it worked over a year ago with my first tests with unRAID 6.8 but as this caused many bugs with my X570 board and Ryzen 3900X unRAID 6.8 is no option for me... Quote Link to comment
spl147 Posted February 12, 2021 Share Posted February 12, 2021 Hi, I justed started to begin my testings with the latest unRAID 6.9 beta and I wonder if the MakeMKV docker is compatible with it? I have added my optical drive within the extra parameters section: " --device /dev/sr0" The Docker container starts without any errors but MakeMKV do not regognize any optical drive. I have also tested it with " --device /dev/sr0 --device /dev/sg0", but no luck. I can remember that it worked over a year ago with my first tests with unRAID 6.8 but as this caused many bugs with my X570 board and Ryzen 3900X unRAID 6.8 is no option for me...The log will tell you what parameters to pass for your optical drive 1 Quote Link to comment
likesboc Posted February 17, 2021 Share Posted February 17, 2021 i can't seem to get this image running. after the installation i add "--device /dev/sr0 --device /dev/sg11" as an extra option. with or without it the vnc connection starts, but makemkv only shows a red X at the top left corner. error 1006. the log does not appear to show any errors. apparenlty vnc starts but makemkv doesnt i guess. what cna i do to figure out what goes wrong? Quote Link to comment
Djoss Posted February 17, 2021 Author Share Posted February 17, 2021 5 minutes ago, likesboc said: i can't seem to get this image running. after the installation i add "--device /dev/sr0 --device /dev/sg11" as an extra option. with or without it the vnc connection starts, but makemkv only shows a red X at the top left corner. error 1006. the log does not appear to show any errors. apparenlty vnc starts but makemkv doesnt i guess. what cna i do to figure out what goes wrong? Probably a cache issue. Try to clear your browser's cache. Quote Link to comment
likesboc Posted February 17, 2021 Share Posted February 17, 2021 51 minutes ago, Djoss said: Probably a cache issue. Try to clear your browser's cache. oh wow, yeah, it was only that. thank you so much for getting back to me this quickly! the image works now right out of the box. the very detailed guide in it's description helped me a lot and where easy to followl. i'll give the automated mode a try next! cheers Quote Link to comment
alex165 Posted March 14, 2021 Share Posted March 14, 2021 (edited) Good evening, I am having an issue with the manual rip of a movie, that if i try and monitor the progress of the rip, from a different device than what i started it on. The copy stops and the remaining time climbs infinitely. I am also having an issue where i cannot restart the docker. The restart circles for a few minutes and then goes back to started and then the webui does not ever connect again. I have to remove the container and then add it back to Unraid to start another manual rip. I will post logs tomorrow, after i test again to verify. Edit: I have tested using a 4K bluray and have attached the logs from the newly created docker. I am on Unraid 6.9.1. I am using an LG WH16NS60 in an external USB enclosure. 03-14 MakeMKV Docker logs.txt Edited March 14, 2021 by alex165 Adding additional detail Quote Link to comment
Djoss Posted March 15, 2021 Author Share Posted March 15, 2021 19 hours ago, alex165 said: Good evening, I am having an issue with the manual rip of a movie, that if i try and monitor the progress of the rip, from a different device than what i started it on. The copy stops and the remaining time climbs infinitely. I am also having an issue where i cannot restart the docker. The restart circles for a few minutes and then goes back to started and then the webui does not ever connect again. I have to remove the container and then add it back to Unraid to start another manual rip. I will post logs tomorrow, after i test again to verify. Edit: I have tested using a 4K bluray and have attached the logs from the newly created docker. I am on Unraid 6.9.1. I am using an LG WH16NS60 in an external USB enclosure. 03-14 MakeMKV Docker logs.txt 10.49 kB · 0 downloads So you are ripping using the GUI ? I don't think that the issue is related to the fact your are accessing the UI from different locations. Looks like MakeMKV have issue reading the disc. What the MakeMKV's log (in the UI) is saying ? Quote Link to comment
shortnproud Posted March 30, 2021 Share Posted March 30, 2021 I am new to unraid and docker so i been searching trying to figure this out. When trying to rip dvds i get very poor speeds. I did some searching and found a post mentioning increasing the read buffer. I did that but the max i can increase it to is 1024. After increasing it to that i get pretty good read speeds until i get close to the 1000mb file size then it slows right back down. Is there something to change to allow me to go higher than 1024? Thanks Quote Link to comment
BigWorm Posted April 10, 2021 Share Posted April 10, 2021 Getting a Fatal error when scanning BD+ title. It's not on every disc, but so far I have 2 that it keeps doing that. Anyone have any tips? Quote Link to comment
Djoss Posted April 13, 2021 Author Share Posted April 13, 2021 On 3/30/2021 at 4:47 PM, shortnproud said: I am new to unraid and docker so i been searching trying to figure this out. When trying to rip dvds i get very poor speeds. I did some searching and found a post mentioning increasing the read buffer. I did that but the max i can increase it to is 1024. After increasing it to that i get pretty good read speeds until i get close to the 1000mb file size then it slows right back down. Is there something to change to allow me to go higher than 1024? Thanks Where is the destination of your rip ? Is it on your cache drive ? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.