Jump to content
Djoss

[Support] Djoss - MakeMKV

514 posts in this topic Last Reply

Recommended Posts

On 2/10/2020 at 1:24 PM, Djoss said:

The same BluRay drive has 2 linux devices associated to it.  In your log, you can see the following log:

 


[cont-init.d] 95-check-optical-drive.sh: found optical drive [/dev/sr0, /dev/sg0], group 19.

 

/dev/sr0 and /dev/sg0 are the 2 devices that normally need to be exposed.  However, the container doesn't complain about any missing devices... are you running the container in privileged mode?

Yes, I am, I didn't start that way, but moved to Privileged when i got the  performance issues, but it didn't help, and I have had "--device /dev/sr0 --device /dev/sg0" in extra parameters

Share this post


Link to post

The other issue I am currently having, is that if I start this container, I can't get i to stop

Share this post


Link to post
On 2/11/2020 at 10:49 PM, wesman said:

Yes, I am, I didn't start that way, but moved to Privileged when i got the  performance issues, but it didn't help, and I have had "--device /dev/sr0 --device /dev/sg0" in extra parameters

Do you have the same speed with any disc?

Share this post


Link to post
On 2/11/2020 at 10:50 PM, wesman said:

The other issue I am currently having, is that if I start this container, I can't get i to stop

What do you mean exactly? If the container doesn't stop by itself when requested, docker will forcefully terminate it after few seconds.

Share this post


Link to post
3 hours ago, Djoss said:

What do you mean exactly? If the container doesn't stop by itself when requested, docker will forcefully terminate it after few seconds.

That's what it suppose to do, but it hangs the entire system,  requiring a Power Button force power down to get anywhere. 

 

 

Share this post


Link to post
3 hours ago, Djoss said:

Do you have the same speed with any disc?

Approximately the same speed on all disks

Share this post


Link to post

@Djoss Apparently, the Hanging issue was the result of a faulty SATA Cable to one of my Array Disks. Odd that it would affect so much, but it appears to be working correctly now. Will check the speed on the next Bluray that I order

Share this post


Link to post
On 2/19/2020 at 8:43 AM, wesman said:

@Djoss Apparently, the Hanging issue was the result of a faulty SATA Cable to one of my Array Disks. Odd that it would affect so much, but it appears to be working correctly now. Will check the speed on the next Bluray that I order

Great, let met know!

Share this post


Link to post

Did the container stopped working for anyone else since upgrading to 6.8.3?

I just get "server execution error" when trying to start it.

This is the only container I have this problem with

Share this post


Link to post
On 3/16/2020 at 4:48 AM, Marv said:

Did the container stopped working for anyone else since upgrading to 6.8.3?

I just get "server execution error" when trying to start it.

This is the only container I have this problem with

Double check the devices you mapped to the container.  They may have changed ?

Share this post


Link to post

I have been using MakeMKV for years through a VM on Unraid. For some reason today my VM isn't booting up (I rarely use it). Much to my joy, I found the docker container here and it has a clean interface and is exactly what I want! No more booting the VM just to rip movies!

 

However, I'm struggling on passing my internal BDROM to the container. I have tried passing /dev/sr0 and /dev/sg0-sg6 but I haven't had any luck. In the Unraid hardware settings, I can confirm the BDROM is sr0. I have no clue how to confirm the sgY number. I have checked the readme and I don't see any output once I build the container that validates which devices that I should add.

 

Does anyone have any suggestions for me to try to get my BDROM passed into the container?

Share this post


Link to post
1 hour ago, Takachsin said:

I have been using MakeMKV for years through a VM on Unraid. For some reason today my VM isn't booting up (I rarely use it). Much to my joy, I found the docker container here and it has a clean interface and is exactly what I want! No more booting the VM just to rip movies!

 

However, I'm struggling on passing my internal BDROM to the container. I have tried passing /dev/sr0 and /dev/sg0-sg6 but I haven't had any luck. In the Unraid hardware settings, I can confirm the BDROM is sr0. I have no clue how to confirm the sgY number. I have checked the readme and I don't see any output once I build the container that validates which devices that I should add.

 

Does anyone have any suggestions for me to try to get my BDROM passed into the container?

In container's log, you should see messages like these, don't you?

 

[cont-init.d] 95-check-optical-drive.sh: executing...
[cont-init.d] 95-check-optical-drive.sh: looking for usable optical drives...
[cont-init.d] 95-check-optical-drive.sh: found optical drive [/dev/sr0, /dev/sg1], group 19.
[cont-init.d] 95-check-optical-drive.sh: exited 0.

 

Share this post


Link to post
7 hours ago, Djoss said:

In container's log, you should see messages like these, don't you?

 


[cont-init.d] 95-check-optical-drive.sh: executing...
[cont-init.d] 95-check-optical-drive.sh: looking for usable optical drives...
[cont-init.d] 95-check-optical-drive.sh: found optical drive [/dev/sr0, /dev/sg1], group 19.
[cont-init.d] 95-check-optical-drive.sh: exited 0.

 

 

I was able to find it in the logs, it says it has found the optical drives and I have them mapped. However, I still get a "The program can't find any usable optical drives."

[cont-init.d] 95-check-optical-drive.sh: executing... 
[cont-init.d] 95-check-optical-drive.sh: looking for usable optical drives...
[cont-init.d] 95-check-optical-drive.sh: found optical drive [/dev/sr0, /dev/sg6], group 19.
[cont-init.d] 95-check-optical-drive.sh: exited 0.

 

Edited by Takachsin
style change

Share this post


Link to post
On 3/26/2020 at 6:33 PM, Takachsin said:

 

I was able to find it in the logs, it says it has found the optical drives and I have them mapped. However, I still get a "The program can't find any usable optical drives."


[cont-init.d] 95-check-optical-drive.sh: executing... 
[cont-init.d] 95-check-optical-drive.sh: looking for usable optical drives...
[cont-init.d] 95-check-optical-drive.sh: found optical drive [/dev/sr0, /dev/sg6], group 19.
[cont-init.d] 95-check-optical-drive.sh: exited 0.

 

Running as privileged mode fixed it.

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.