before i order this NIC, can i confirm that it works with unraid?

intel ethernet converged network adapter x540-t2 

 

having said this, would it work with windows 7/10 too? if not my pc solution, i will use asus new nic 10gbe.

 

what do you think, guys

has to be rj45, im aware the fiber solution is cheaper.

 

the x540-t2 can get around 80-95usd in ebay.

 

my motherboard is supermicro X9SCM-F.

Edited July 3, 20179 yr by kanichkhun

hi guys,

 

my intel x540-t2 arrived and installed.

i installed on my windows 10 pc and was working fine then i plugged into my unraid machine.

how do i configure the unraid to use the NIC instead? 

anyone can assist me, please?

 

[8086:0100] 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
[8086:0101] 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
[8086:0105] 00:01.1 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
[8086:1502] 00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 05)
[8086:1c2d] 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
[8086:1c10] 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)
[8086:1c18] 00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5)
[8086:1c26] 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
[8086:244e] 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a5)
[8086:1c54] 00:1f.0 ISA bridge: Intel Corporation C204 Chipset Family LPC Controller (rev 05)
[8086:1c02] 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family SATA AHCI Controller (rev 05)
[8086:1c22] 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
[1b4b:9485] 01:00.0 RAID bus controller: Marvell Technology Group Ltd. 88SE9485 SAS/SATA 6Gb/s controller (rev 03)
[1b4b:9485] 02:00.0 RAID bus controller: Marvell Technology Group Ltd. 88SE9485 SAS/SATA 6Gb/s controller (rev c3)
[8086:1528] 03:00.0 Ethernet controller: Intel Corporation Ethernet Controller 10-Gigabit X540-AT2 (rev 01)
[8086:10d3] 05:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection
[102b:0532] 06:03.0 VGA compatible controller: Matrox Electronics Systems Ltd. MGA G200eW WPCM450 (rev 0a)

 

 

Edited August 1, 20178 yr by kanichkhun

Settings -> Network Settings -> Interface Rules

 

Select which NIC you want as eth0 and configure it, you'll need to reboot to apply any interface rules change.

 

You can use the boot GUI mode to configure these if you don't currently have network access.

thanks johnnie for the quick reply.. let me see if it works.. i ain't sure of the linux command code to list out the eth addresses 

i got it working already.. i see this address to the device is different to the other 2 which is pretty similar except last digit.. so i picked the other address and it is working.. 

thank you!

Thanks. Bought the same card now