Nexius2 Posted December 15, 2021 Share Posted December 15, 2021 On 12/8/2021 at 3:41 AM, Djoss said: Maybe you can check on the JDownloader forum to see if someone else reported this issue ? found the issue. it was behind a VPN and it seem to cause the problem. removing the vpn solved the issue Quote Link to comment
Mr.meowgi Posted January 5, 2022 Share Posted January 5, 2022 hello, i am using your docker container and i cannot use the UI on my ipad or iphone unless the connection is unnectrypted. It seems like the interface is not touch friendly as i have to drag my finger on the screen and a mouse pointer shows up. Is there a workaround for this? thank you! Quote Link to comment
Djoss Posted January 5, 2022 Author Share Posted January 5, 2022 22 hours ago, Mr.meowgi said: hello, i am using your docker container and i cannot use the UI on my ipad or iphone unless the connection is unnectrypted. With encrypted connection, are you using a valid certificate ? If not, this is a known behaviour on iOS where a secure WebSocket connection won't be done is certificate can't be successfully validated. 22 hours ago, Mr.meowgi said: It seems like the interface is not touch friendly as i have to drag my finger on the screen and a mouse pointer shows up. Is there a workaround for this? Not sure to I understand the problem. Don't forget that your are accessing a desktop application, not a mobile one. So the web interface used to access the desktop application is mobile friendly, but not the application itself. Quote Link to comment
Shinobu Posted January 17, 2022 Share Posted January 17, 2022 (edited) Hi, I'm having issues with the docker seeming to set permissions as 770 for all created files on Private shares, even with the umask set to 000. This means that even users with read/write access on the shares the docker is writing to, they cannot read any file or directory created by the docker. Is there any way to override the default permissions the docker is setting? Having to amend permissions every time the docker touches a file is not great. EDIT: Found that this was caused by remnants of being on Active Directory, but rather than being a permissions issue, it was an extended ACL issue. Using the command "setfacl -Rb /mnt/user/" resets the ACL on all user shares, then re-ran docker safe permissions tool and voilà, dockers are able to assign permissions as expected. Edited January 17, 2022 by Shinobu Quote Link to comment
Bob@unraid Posted February 9, 2022 Share Posted February 9, 2022 (edited) Hello everyone, I updated my server with new hardware (mainboard and cpu) and now I couldn´t connect to my jdownloader web GUI anymore. First I showed an error "could connect to the server" and now I could not even start the GUI. I changed the ports but the container always tries to open port 5800 even if this port isn´t assigned anywere (see the screenshot). The "strange" thing is docker itself is running, I can access it through the myjdownloader webinterface, so really just the docker GUI isn´t working. I there anything I could try? Thanks Edited February 9, 2022 by Bob@unraid Quote Link to comment
Djoss Posted February 10, 2022 Author Share Posted February 10, 2022 1 hour ago, Bob@unraid said: Hello everyone, I updated my server with new hardware (mainboard and cpu) and now I couldn´t connect to my jdownloader web GUI anymore. First I showed an error "could connect to the server" and now I could not even start the GUI. I changed the ports but the container always tries to open port 5800 even if this port isn´t assigned anywere (see the screenshot). The "strange" thing is docker itself is running, I can access it through the myjdownloader webinterface, so really just the docker GUI isn´t working. I there anything I could try? Thanks The container port is always 5800. It's the port on the host side that can be changed. I would try to remove duplicated settings. The initial error would have been solved by clearing your browser cache. 1 Quote Link to comment
Bob@unraid Posted February 10, 2022 Share Posted February 10, 2022 (edited) Thanks for the fast reply Djoss! I changed the host port, that´s what I ment and did. my fault. I remove the duplicated settings and wipe the browser cache when I am at home after work. Write back later. Edit: I selected the wrong network "mode" yesterday. I set it to bridge but the right one is my custom br0 network Now it´s working again! But a big thanks anyway! Edited February 11, 2022 by Bob@unraid Quote Link to comment
Ryguy Posted April 2, 2022 Share Posted April 2, 2022 I have notices that since upgrading to 6.10 rc4 that I can no longer access the gui if i have accessed it previously. I receive an Error 1006. When i look in the logs I receive a notice about multiple xserver instances possibly running. Has anyone solved this? Quote Link to comment
Djoss Posted April 3, 2022 Author Share Posted April 3, 2022 Did you try to clear your browser cache and/or access the UI via an incognito/private window ? Quote Link to comment
jaysn8 Posted April 4, 2022 Share Posted April 4, 2022 Hey guys, I am experiencing a strange thing: my cursor is doubled by the GUI. When I enter the web GUI it is working fine but the cursor is displayed twice and the second cursor is following the normal cursor with some delay. As I said the software is wokring fine but this issue is kind of annoying. Does anybody have an idea how to get rid of it? Thanks! Quote Link to comment
chris_netsmart Posted April 13, 2022 Share Posted April 13, 2022 (edited) SOLVED - the issue was my VPN, for some reason it waited a reboot. once I did this, the it started to allow the traffic from my downloader to pass through it. I am trying to force all my traffic through my binhex VPN, as I don't want people to see what I am doing, so I copied my settings from my other binhex dockers but for some reason it is still going through my normal router and no the VPN. so within my downloader2 I have modify my setting with the following and within my delugevpn, I have added the following ports but when I add a file to donwload, it finds it with no issuse, but when it starts to download it is finding my external IP address and not my VPN IP address. opps I forgot to add that my proxy is pointing to my unraid server IP address with a port of 8118 any ideals ? Edited April 14, 2022 by chris_netsmart Quote Link to comment
Ryguy Posted April 16, 2022 Share Posted April 16, 2022 On 4/2/2022 at 9:32 PM, Djoss said: Did you try to clear your browser cache and/or access the UI via an incognito/private window ? I tried clearing browser cache but no joy. I just tried accessing through an incognito window and it worked! Any idea why that is? Quote Link to comment
PilaScat Posted April 20, 2022 Share Posted April 20, 2022 Error 1006, only in wan, I use NPM and Organizr auth It happens even with your mkvtoolnix docker They are in a custom docker network Quote Link to comment
Rolox Posted May 29, 2022 Share Posted May 29, 2022 Extremely dumb question. I installed the Docker container for JDownloader and can't find a way to feed the link that I want to donwload unless I type them by hand. All tutorials I have found are under a windows machine and older posts are about more advanced stuff. I imagine the link by loading a txt file or something on the web gui interface but can't find the option. Quote Link to comment
Djoss Posted May 30, 2022 Author Share Posted May 30, 2022 16 hours ago, Rolox said: Extremely dumb question. I installed the Docker container for JDownloader and can't find a way to feed the link that I want to donwload unless I type them by hand. All tutorials I have found are under a windows machine and older posts are about more advanced stuff. I imagine the link by loading a txt file or something on the web gui interface but can't find the option. You can copy/paste the link with the clipboard function. However, the most easy way is to use MyJDownloader with the browser extension (https://my.jdownloader.org/apps/). Quote Link to comment
dancue Posted June 4, 2022 Share Posted June 4, 2022 Any way to make it full screen on the page? Quote Link to comment
Djoss Posted June 6, 2022 Author Share Posted June 6, 2022 On 6/3/2022 at 9:13 PM, dancue said: Any way to make it full screen on the page? If you mean that the UI can resize automatically to your browser's window size, this is not yet possible. However, if you configure the application's width and height to be bigger than your browser's window, then you should have something that can fill all the browser window. Quote Link to comment
dancue Posted June 6, 2022 Share Posted June 6, 2022 2 minutes ago, Djoss said: If you mean that the UI can resize automatically to your browser's window size, this is not yet possible. However, if you configure the application's width and height to be bigger than your browser's window, then you should have something that can fill all the browser window. How do I configure the application's width and height? Quote Link to comment
Djoss Posted June 6, 2022 Author Share Posted June 6, 2022 1 minute ago, dancue said: How do I configure the application's width and height? Edit the container's configuration, click "Show more settings..." and then you have "Display Width" and "Display Heigh" fields you can set. Quote Link to comment
dancue Posted June 6, 2022 Share Posted June 6, 2022 (edited) 3 minutes ago, Djoss said: Edit the container's configuration, click "Show more settings..." and then you have "Display Width" and "Display Heigh" fields you can set. Ok. I'll try that. Edit: That worked! Thanks! Looking forward to it auto scaling. Edited June 6, 2022 by dancue Quote Link to comment
misterbeetz Posted June 17, 2022 Share Posted June 17, 2022 Is anyone here using event scripter? I am trying to make a script that will run a unix executable upon download completion however Jdownloader is giving me an error that it does not see the executable. Here is the basic script I am trying to test (the unix executable is "extract-xiso" and is located in the output directory): var extract = "/output/extract-xiso"; var file = "/output/test.iso"; callSync(extract, file); extract-xiso is designed to extract the contents of a .iso file however I get the following error when I test run this script: "java.io.IOException: Cannot run program "/output/extract-xiso": error=2, No such file or directory" Does anyone have an idea on what I might be doing wrong? I have confirmed that extract-xiso is exectuable as I can execute it directly from Unraid terminal. Quote Link to comment
jpm Posted June 20, 2022 Share Posted June 20, 2022 (edited) First i would like to say tha this is probably 100% my fault Today i upgrade to unraid 6.10.3 and no longer have acess to the gui of jdownloader. In bridge mode, i get nothing like the app didn't exits, no error on the log: [s6-init] making user provided files available at /var/run/s6/etc...exited 0. [s6-init] ensuring user provided files have correct perms...exited 0. [fix-attrs.d] applying ownership & permissions fixes... [fix-attrs.d] done. [cont-init.d] executing container initialization scripts... [cont-init.d] 00-app-niceness.sh: executing... [cont-init.d] 00-app-niceness.sh: exited 0. [cont-init.d] 00-app-script.sh: executing... [cont-init.d] 00-app-script.sh: exited 0. [cont-init.d] 00-app-user-map.sh: executing... [cont-init.d] 00-app-user-map.sh: exited 0. [cont-init.d] 00-clean-logmonitor-states.sh: executing... [cont-init.d] 00-clean-logmonitor-states.sh: exited 0. [cont-init.d] 00-clean-tmp-dir.sh: executing... [cont-init.d] 00-clean-tmp-dir.sh: exited 0. [cont-init.d] 00-set-app-deps.sh: executing... [cont-init.d] 00-set-app-deps.sh: exited 0. [cont-init.d] 00-set-home.sh: executing... [cont-init.d] 00-set-home.sh: exited 0. [cont-init.d] 00-take-config-ownership.sh: executing... [cont-init.d] 00-take-config-ownership.sh: exited 0. [cont-init.d] 00-xdg-runtime-dir.sh: executing... [cont-init.d] 00-xdg-runtime-dir.sh: exited 0. [cont-init.d] 10-certs.sh: executing... [cont-init.d] 10-certs.sh: exited 0. [cont-init.d] 10-cjk-font.sh: executing... [cont-init.d] 10-cjk-font.sh: exited 0. [cont-init.d] 10-nginx.sh: executing... [cont-init.d] 10-nginx.sh: exited 0. [cont-init.d] 10-vnc-password.sh: executing... [cont-init.d] 10-vnc-password.sh: exited 0. [cont-init.d] 10-web-index.sh: executing... [cont-init.d] 10-web-index.sh: exited 0. [cont-init.d] jdownloader2.sh: executing... [cont-init.d] jdownloader2.sh: exited 0. [cont-init.d] done. [services.d] starting services [services.d] starting s6-fdholderd... [services.d] starting certsmonitor... [services.d] starting nginx... [certsmonitor] starting... [services.d] starting xvfb... [nginx] starting... [xvfb] starting... [services.d] starting logmonitor... [logmonitor] no file to monitor: disabling service... s6-svwait: fatal: timed out [services.d] starting statusmonitor... [services.d] starting openbox... [statusmonitor] no file to monitor: disabling service... [openbox] starting... [services.d] starting x11vnc... [services.d] starting app... [x11vnc] starting... [app] starting JDownloader 2... [services.d] done. [jdsupervisor] JDownloader2 not started yet. Proceeding... 20/06/2022 13:06:02 passing arg to libvncserver: -rfbport 20/06/2022 13:06:02 passing arg to libvncserver: 5900 20/06/2022 13:06:02 passing arg to libvncserver: -rfbportv6 20/06/2022 13:06:02 passing arg to libvncserver: -1 20/06/2022 13:06:02 passing arg to libvncserver: -httpportv6 20/06/2022 13:06:02 passing arg to libvncserver: -1 20/06/2022 13:06:02 passing arg to libvncserver: -desktop 20/06/2022 13:06:02 passing arg to libvncserver: JDownloader 2 20/06/2022 13:06:02 Setting -localhost in -stunnel mode. 20/06/2022 13:06:02 x11vnc version: 0.9.14 lastmod: 2015-11-14 pid: 6999 20/06/2022 13:06:02 Using X display :0 20/06/2022 13:06:02 rootwin: 0x43 reswin: 0x400001 dpy: 0x311d9b40 20/06/2022 13:06:02 20/06/2022 13:06:02 ------------------ USEFUL INFORMATION ------------------ 20/06/2022 13:06:02 X DAMAGE available on display, using it for polling hints. 20/06/2022 13:06:02 To disable this behavior use: '-noxdamage' 20/06/2022 13:06:02 20/06/2022 13:06:02 Most compositing window managers like 'compiz' or 'beryl' 20/06/2022 13:06:02 cause X DAMAGE to fail, and so you may not see any screen 20/06/2022 13:06:02 updates via VNC. Either disable 'compiz' (recommended) or 20/06/2022 13:06:02 supply the x11vnc '-noxdamage' command line option. 20/06/2022 13:06:02 X COMPOSITE available on display, using it for window polling. 20/06/2022 13:06:02 To disable this behavior use: '-noxcomposite' 20/06/2022 13:06:02 20/06/2022 13:06:02 Wireframing: -wireframe mode is in effect for window moves. 20/06/2022 13:06:02 If this yields undesired behavior (poor response, painting 20/06/2022 13:06:02 errors, etc) it may be disabled: 20/06/2022 13:06:02 - use '-nowf' to disable wireframing completely. 20/06/2022 13:06:02 - use '-nowcr' to disable the Copy Rectangle after the 20/06/2022 13:06:02 moved window is released in the new position. 20/06/2022 13:06:02 Also see the -help entry for tuning parameters. 20/06/2022 13:06:02 You can press 3 Alt_L's (Left "Alt" key) in a row to 20/06/2022 13:06:02 repaint the screen, also see the -fixscreen option for 20/06/2022 13:06:02 periodic repaints. 20/06/2022 13:06:02 GrabServer control via XTEST. 20/06/2022 13:06:02 20/06/2022 13:06:02 Scroll Detection: -scrollcopyrect mode is in effect to 20/06/2022 13:06:02 use RECORD extension to try to detect scrolling windows 20/06/2022 13:06:02 (induced by either user keystroke or mouse input). 20/06/2022 13:06:02 If this yields undesired behavior (poor response, painting 20/06/2022 13:06:02 errors, etc) it may be disabled via: '-noscr' 20/06/2022 13:06:02 Also see the -help entry for tuning parameters. 20/06/2022 13:06:02 You can press 3 Alt_L's (Left "Alt" key) in a row to 20/06/2022 13:06:02 repaint the screen, also see the -fixscreen option for 20/06/2022 13:06:02 periodic repaints. 20/06/2022 13:06:02 20/06/2022 13:06:02 XKEYBOARD: number of keysyms per keycode 7 is greater 20/06/2022 13:06:02 than 4 and 51 keysyms are mapped above 4. 20/06/2022 13:06:02 Automatically switching to -xkb mode. 20/06/2022 13:06:02 If this makes the key mapping worse you can 20/06/2022 13:06:02 disable it with the "-noxkb" option. 20/06/2022 13:06:02 Also, remember "-remap DEAD" for accenting characters. 20/06/2022 13:06:02 20/06/2022 13:06:02 X FBPM extension not supported. Xlib: extension "DPMS" missing on display ":0". 20/06/2022 13:06:02 X display is not capable of DPMS. 20/06/2022 13:06:02 -------------------------------------------------------- 20/06/2022 13:06:02 20/06/2022 13:06:02 Default visual ID: 0x21 20/06/2022 13:06:02 Read initial data from X display into framebuffer. 20/06/2022 13:06:02 initialize_screen: fb_depth/fb_bpp/fb_Bpl 24/32/8160 20/06/2022 13:06:02 20/06/2022 13:06:02 starting ssl tunnel: /usr/bin/stunnel 5900 -> 5950 2022.06.20 13:06:02 LOG5[ui]: stunnel 5.44 on x86_64-pc-linux-gnu platform 2022.06.20 13:06:02 LOG5[ui]: Compiled/running with OpenSSL 1.1.1k 25 Mar 2021 2022.06.20 13:06:02 LOG5[ui]: Threading:PTHREAD Sockets:POLL,IPv6 TLS:ENGINE,FIPS,OCSP,PSK,SNI 2022.06.20 13:06:02 LOG5[ui]: Reading configuration from descriptor 3 2022.06.20 13:06:02 LOG5[ui]: UTF-8 byte order mark not detected 2022.06.20 13:06:02 LOG5[ui]: FIPS mode disabled 2022.06.20 13:06:02 LOG5[ui]: Configuration successful 20/06/2022 13:06:03 stunnel pid is: 7050 20/06/2022 13:06:03 20/06/2022 13:06:03 X display :0 is 32bpp depth=24 true color 20/06/2022 13:06:03 20/06/2022 13:06:03 Listening for VNC connections on TCP port 5950 20/06/2022 13:06:03 20/06/2022 13:06:03 Xinerama is present and active (e.g. multi-head). 20/06/2022 13:06:03 Xinerama: number of sub-screens: 1 20/06/2022 13:06:03 Xinerama: no blackouts needed (only one sub-screen) 20/06/2022 13:06:03 20/06/2022 13:06:03 fb read rate: 2439 MB/sec 20/06/2022 13:06:03 fast read: reset -wait ms to: 10 20/06/2022 13:06:03 fast read: reset -defer ms to: 10 20/06/2022 13:06:03 The X server says there are 10 mouse buttons. 20/06/2022 13:06:03 screen setup finished. 20/06/2022 13:06:03 The VNC desktop is: localhost:50 The SSL VNC desktop is: 132e6e96067b:0 PORT=5950 SSLPORT=5900 ****************************************************************************** Have you tried the x11vnc '-ncache' VNC client-side pixel caching feature yet? The scheme stores pixel data offscreen on the VNC viewer side for faster retrieval. It should work with any VNC viewer. Try it by running: x11vnc -ncache 10 ... One can also add -ncache_cr for smooth 'copyrect' window motion. More info: http://www.karlrunge.com/x11vnc/faq.html#faq-client-caching I have tried incognito mode as sugested on the topic with the same result. If i'm on host mode and therefore port 5800 i get an error: 20/06/2022 13:09:52 If this yields undesired behavior (poor response, painting 20/06/2022 13:09:52 errors, etc) it may be disabled via: '-noscr' 20/06/2022 13:09:52 Also see the -help entry for tuning parameters. 20/06/2022 13:09:52 You can press 3 Alt_L's (Left "Alt" key) in a row to 20/06/2022 13:09:52 repaint the screen, also see the -fixscreen option for 20/06/2022 13:09:52 periodic repaints. 20/06/2022 13:09:52 20/06/2022 13:09:52 XKEYBOARD: number of keysyms per keycode 7 is greater 20/06/2022 13:09:52 than 4 and 51 keysyms are mapped above 4. 20/06/2022 13:09:52 Automatically switching to -xkb mode. 20/06/2022 13:09:52 If this makes the key mapping worse you can 20/06/2022 13:09:52 disable it with the "-noxkb" option. 20/06/2022 13:09:52 Also, remember "-remap DEAD" for accenting characters. 20/06/2022 13:09:52 20/06/2022 13:09:52 X FBPM extension not supported. Xlib: extension "DPMS" missing on display ":0". 20/06/2022 13:09:52 X display is not capable of DPMS. 20/06/2022 13:09:52 -------------------------------------------------------- 20/06/2022 13:09:52 20/06/2022 13:09:52 Default visual ID: 0x21 20/06/2022 13:09:52 Read initial data from X display into framebuffer. 20/06/2022 13:09:52 initialize_screen: fb_depth/fb_bpp/fb_Bpl 24/32/8160 20/06/2022 13:09:52 20/06/2022 13:09:52 starting ssl tunnel: /usr/bin/stunnel 5900 -> 5950 2022.06.20 13:09:52 LOG5[ui]: stunnel 5.44 on x86_64-pc-linux-gnu platform 2022.06.20 13:09:52 LOG5[ui]: Compiled/running with OpenSSL 1.1.1k 25 Mar 2021 2022.06.20 13:09:52 LOG5[ui]: Threading:PTHREAD Sockets:POLL,IPv6 TLS:ENGINE,FIPS,OCSP,PSK,SNI 2022.06.20 13:09:52 LOG5[ui]: Reading configuration from descriptor 3 2022.06.20 13:09:52 LOG5[ui]: UTF-8 byte order mark not detected 2022.06.20 13:09:52 LOG5[ui]: FIPS mode disabled 2022.06.20 13:09:52 LOG5[ui]: Configuration successful 20/06/2022 13:09:53 stunnel pid is: 7071 20/06/2022 13:09:53 20/06/2022 13:09:53 X display :0 is 32bpp depth=24 true color 20/06/2022 13:09:53 20/06/2022 13:09:53 Listening for VNC connections on TCP port 5950 20/06/2022 13:09:53 Listening for VNC connections on TCP6 port 5900 20/06/2022 13:09:53 Listening also on IPv6 port 5950 (socket 11) 20/06/2022 13:09:53 20/06/2022 13:09:53 Xinerama is present and active (e.g. multi-head). 20/06/2022 13:09:53 Xinerama: number of sub-screens: 1 20/06/2022 13:09:53 Xinerama: no blackouts needed (only one sub-screen) 20/06/2022 13:09:53 20/06/2022 13:09:53 fb read rate: 2565 MB/sec 20/06/2022 13:09:53 fast read: reset -wait ms to: 10 20/06/2022 13:09:53 fast read: reset -defer ms to: 10 20/06/2022 13:09:53 The X server says there are 10 mouse buttons. 20/06/2022 13:09:53 screen setup finished. 20/06/2022 13:09:53 The VNC desktop is: localhost:50 The SSL VNC desktop is: Tower:0 PORT=5950 SSLPORT=5900 ****************************************************************************** Have you tried the x11vnc '-ncache' VNC client-side pixel caching feature yet? The scheme stores pixel data offscreen on the VNC viewer side for faster retrieval. It should work with any VNC viewer. Try it by running: x11vnc -ncache 10 ... One can also add -ncache_cr for smooth 'copyrect' window motion. More info: http://www.karlrunge.com/x11vnc/faq.html#faq-client-caching [services.d] starting app... [app] starting JDownloader 2... [services.d] done. [jdsupervisor] JDownloader2 not started yet. Proceeding... 20/06/2022 13:09:56 Got connection from client 127.0.0.1 20/06/2022 13:09:56 other clients: 20/06/2022 13:09:56 Got 'ws' WebSockets handshake 20/06/2022 13:09:56 Got protocol: binary 20/06/2022 13:09:56 - webSocketsHandshake: using binary/raw encoding 20/06/2022 13:09:56 - WebSockets client version hybi-13 20/06/2022 13:09:56 check_access: client 127.0.0.1 matches host 127.0.0.1 20/06/2022 13:09:56 Disabled X server key autorepeat. 20/06/2022 13:09:56 to force back on run: 'xset r on' (3 times) 20/06/2022 13:09:56 incr accepted_client=1 for 127.0.0.1:49028 sock=12 20/06/2022 13:09:56 webSocketsDecodeHybi: got frame without mask <b>20/06/2022 13:09:56 rfbProcessClientProtocolVersion: read: I/O error</b> 20/06/2022 13:09:56 client_count: 0 20/06/2022 13:09:56 Restored X server key autorepeat to: 1 20/06/2022 13:09:56 Client 127.0.0.1 gone 20/06/2022 13:09:56 Statistics events Transmit/ RawEquiv ( saved) 20/06/2022 13:09:56 TOTALS : 0 | 0/ 0 ( 0.0%) 20/06/2022 13:09:56 Statistics events Received/ RawEquiv ( saved) 20/06/2022 13:09:56 TOTALS : 0 | 0/ 0 ( 0.0%) Any sugestions? PS: all settings are stock except the download location path Edited June 20, 2022 by jpm adding explanation Quote Link to comment
Djoss Posted June 20, 2022 Author Share Posted June 20, 2022 On 6/17/2022 at 11:11 AM, misterbeetz said: Is anyone here using event scripter? I am trying to make a script that will run a unix executable upon download completion however Jdownloader is giving me an error that it does not see the executable. Here is the basic script I am trying to test (the unix executable is "extract-xiso" and is located in the output directory): var extract = "/output/extract-xiso"; var file = "/output/test.iso"; callSync(extract, file); extract-xiso is designed to extract the contents of a .iso file however I get the following error when I test run this script: "java.io.IOException: Cannot run program "/output/extract-xiso": error=2, No such file or directory" Does anyone have an idea on what I might be doing wrong? I have confirmed that extract-xiso is exectuable as I can execute it directly from Unraid terminal. Maybe a permission issue ? Can you share the output of "docker exec JDownloader2 ls -l /output/extract-xiso" ? Quote Link to comment
Djoss Posted June 20, 2022 Author Share Posted June 20, 2022 51 minutes ago, jpm said: First i would like to say tha this is probably 100% my fault Today i upgrade to unraid 6.10.3 and no longer have acess to the gui of jdownloader. In bridge mode, i get nothing like the app didn't exits, no error on the log: [s6-init] making user provided files available at /var/run/s6/etc...exited 0. [s6-init] ensuring user provided files have correct perms...exited 0. [fix-attrs.d] applying ownership & permissions fixes... [fix-attrs.d] done. [cont-init.d] executing container initialization scripts... [cont-init.d] 00-app-niceness.sh: executing... [cont-init.d] 00-app-niceness.sh: exited 0. [cont-init.d] 00-app-script.sh: executing... [cont-init.d] 00-app-script.sh: exited 0. [cont-init.d] 00-app-user-map.sh: executing... [cont-init.d] 00-app-user-map.sh: exited 0. [cont-init.d] 00-clean-logmonitor-states.sh: executing... [cont-init.d] 00-clean-logmonitor-states.sh: exited 0. [cont-init.d] 00-clean-tmp-dir.sh: executing... [cont-init.d] 00-clean-tmp-dir.sh: exited 0. [cont-init.d] 00-set-app-deps.sh: executing... [cont-init.d] 00-set-app-deps.sh: exited 0. [cont-init.d] 00-set-home.sh: executing... [cont-init.d] 00-set-home.sh: exited 0. [cont-init.d] 00-take-config-ownership.sh: executing... [cont-init.d] 00-take-config-ownership.sh: exited 0. [cont-init.d] 00-xdg-runtime-dir.sh: executing... [cont-init.d] 00-xdg-runtime-dir.sh: exited 0. [cont-init.d] 10-certs.sh: executing... [cont-init.d] 10-certs.sh: exited 0. [cont-init.d] 10-cjk-font.sh: executing... [cont-init.d] 10-cjk-font.sh: exited 0. [cont-init.d] 10-nginx.sh: executing... [cont-init.d] 10-nginx.sh: exited 0. [cont-init.d] 10-vnc-password.sh: executing... [cont-init.d] 10-vnc-password.sh: exited 0. [cont-init.d] 10-web-index.sh: executing... [cont-init.d] 10-web-index.sh: exited 0. [cont-init.d] jdownloader2.sh: executing... [cont-init.d] jdownloader2.sh: exited 0. [cont-init.d] done. [services.d] starting services [services.d] starting s6-fdholderd... [services.d] starting certsmonitor... [services.d] starting nginx... [certsmonitor] starting... [services.d] starting xvfb... [nginx] starting... [xvfb] starting... [services.d] starting logmonitor... [logmonitor] no file to monitor: disabling service... s6-svwait: fatal: timed out [services.d] starting statusmonitor... [services.d] starting openbox... [statusmonitor] no file to monitor: disabling service... [openbox] starting... [services.d] starting x11vnc... [services.d] starting app... [x11vnc] starting... [app] starting JDownloader 2... [services.d] done. [jdsupervisor] JDownloader2 not started yet. Proceeding... 20/06/2022 13:06:02 passing arg to libvncserver: -rfbport 20/06/2022 13:06:02 passing arg to libvncserver: 5900 20/06/2022 13:06:02 passing arg to libvncserver: -rfbportv6 20/06/2022 13:06:02 passing arg to libvncserver: -1 20/06/2022 13:06:02 passing arg to libvncserver: -httpportv6 20/06/2022 13:06:02 passing arg to libvncserver: -1 20/06/2022 13:06:02 passing arg to libvncserver: -desktop 20/06/2022 13:06:02 passing arg to libvncserver: JDownloader 2 20/06/2022 13:06:02 Setting -localhost in -stunnel mode. 20/06/2022 13:06:02 x11vnc version: 0.9.14 lastmod: 2015-11-14 pid: 6999 20/06/2022 13:06:02 Using X display :0 20/06/2022 13:06:02 rootwin: 0x43 reswin: 0x400001 dpy: 0x311d9b40 20/06/2022 13:06:02 20/06/2022 13:06:02 ------------------ USEFUL INFORMATION ------------------ 20/06/2022 13:06:02 X DAMAGE available on display, using it for polling hints. 20/06/2022 13:06:02 To disable this behavior use: '-noxdamage' 20/06/2022 13:06:02 20/06/2022 13:06:02 Most compositing window managers like 'compiz' or 'beryl' 20/06/2022 13:06:02 cause X DAMAGE to fail, and so you may not see any screen 20/06/2022 13:06:02 updates via VNC. Either disable 'compiz' (recommended) or 20/06/2022 13:06:02 supply the x11vnc '-noxdamage' command line option. 20/06/2022 13:06:02 X COMPOSITE available on display, using it for window polling. 20/06/2022 13:06:02 To disable this behavior use: '-noxcomposite' 20/06/2022 13:06:02 20/06/2022 13:06:02 Wireframing: -wireframe mode is in effect for window moves. 20/06/2022 13:06:02 If this yields undesired behavior (poor response, painting 20/06/2022 13:06:02 errors, etc) it may be disabled: 20/06/2022 13:06:02 - use '-nowf' to disable wireframing completely. 20/06/2022 13:06:02 - use '-nowcr' to disable the Copy Rectangle after the 20/06/2022 13:06:02 moved window is released in the new position. 20/06/2022 13:06:02 Also see the -help entry for tuning parameters. 20/06/2022 13:06:02 You can press 3 Alt_L's (Left "Alt" key) in a row to 20/06/2022 13:06:02 repaint the screen, also see the -fixscreen option for 20/06/2022 13:06:02 periodic repaints. 20/06/2022 13:06:02 GrabServer control via XTEST. 20/06/2022 13:06:02 20/06/2022 13:06:02 Scroll Detection: -scrollcopyrect mode is in effect to 20/06/2022 13:06:02 use RECORD extension to try to detect scrolling windows 20/06/2022 13:06:02 (induced by either user keystroke or mouse input). 20/06/2022 13:06:02 If this yields undesired behavior (poor response, painting 20/06/2022 13:06:02 errors, etc) it may be disabled via: '-noscr' 20/06/2022 13:06:02 Also see the -help entry for tuning parameters. 20/06/2022 13:06:02 You can press 3 Alt_L's (Left "Alt" key) in a row to 20/06/2022 13:06:02 repaint the screen, also see the -fixscreen option for 20/06/2022 13:06:02 periodic repaints. 20/06/2022 13:06:02 20/06/2022 13:06:02 XKEYBOARD: number of keysyms per keycode 7 is greater 20/06/2022 13:06:02 than 4 and 51 keysyms are mapped above 4. 20/06/2022 13:06:02 Automatically switching to -xkb mode. 20/06/2022 13:06:02 If this makes the key mapping worse you can 20/06/2022 13:06:02 disable it with the "-noxkb" option. 20/06/2022 13:06:02 Also, remember "-remap DEAD" for accenting characters. 20/06/2022 13:06:02 20/06/2022 13:06:02 X FBPM extension not supported. Xlib: extension "DPMS" missing on display ":0". 20/06/2022 13:06:02 X display is not capable of DPMS. 20/06/2022 13:06:02 -------------------------------------------------------- 20/06/2022 13:06:02 20/06/2022 13:06:02 Default visual ID: 0x21 20/06/2022 13:06:02 Read initial data from X display into framebuffer. 20/06/2022 13:06:02 initialize_screen: fb_depth/fb_bpp/fb_Bpl 24/32/8160 20/06/2022 13:06:02 20/06/2022 13:06:02 starting ssl tunnel: /usr/bin/stunnel 5900 -> 5950 2022.06.20 13:06:02 LOG5[ui]: stunnel 5.44 on x86_64-pc-linux-gnu platform 2022.06.20 13:06:02 LOG5[ui]: Compiled/running with OpenSSL 1.1.1k 25 Mar 2021 2022.06.20 13:06:02 LOG5[ui]: Threading:PTHREAD Sockets:POLL,IPv6 TLS:ENGINE,FIPS,OCSP,PSK,SNI 2022.06.20 13:06:02 LOG5[ui]: Reading configuration from descriptor 3 2022.06.20 13:06:02 LOG5[ui]: UTF-8 byte order mark not detected 2022.06.20 13:06:02 LOG5[ui]: FIPS mode disabled 2022.06.20 13:06:02 LOG5[ui]: Configuration successful 20/06/2022 13:06:03 stunnel pid is: 7050 20/06/2022 13:06:03 20/06/2022 13:06:03 X display :0 is 32bpp depth=24 true color 20/06/2022 13:06:03 20/06/2022 13:06:03 Listening for VNC connections on TCP port 5950 20/06/2022 13:06:03 20/06/2022 13:06:03 Xinerama is present and active (e.g. multi-head). 20/06/2022 13:06:03 Xinerama: number of sub-screens: 1 20/06/2022 13:06:03 Xinerama: no blackouts needed (only one sub-screen) 20/06/2022 13:06:03 20/06/2022 13:06:03 fb read rate: 2439 MB/sec 20/06/2022 13:06:03 fast read: reset -wait ms to: 10 20/06/2022 13:06:03 fast read: reset -defer ms to: 10 20/06/2022 13:06:03 The X server says there are 10 mouse buttons. 20/06/2022 13:06:03 screen setup finished. 20/06/2022 13:06:03 The VNC desktop is: localhost:50 The SSL VNC desktop is: 132e6e96067b:0 PORT=5950 SSLPORT=5900 ****************************************************************************** Have you tried the x11vnc '-ncache' VNC client-side pixel caching feature yet? The scheme stores pixel data offscreen on the VNC viewer side for faster retrieval. It should work with any VNC viewer. Try it by running: x11vnc -ncache 10 ... One can also add -ncache_cr for smooth 'copyrect' window motion. More info: http://www.karlrunge.com/x11vnc/faq.html#faq-client-caching I have tried incognito mode as sugested on the topic with the same result. If i'm on host mode and therefore port 5800 i get an error: 20/06/2022 13:09:52 If this yields undesired behavior (poor response, painting 20/06/2022 13:09:52 errors, etc) it may be disabled via: '-noscr' 20/06/2022 13:09:52 Also see the -help entry for tuning parameters. 20/06/2022 13:09:52 You can press 3 Alt_L's (Left "Alt" key) in a row to 20/06/2022 13:09:52 repaint the screen, also see the -fixscreen option for 20/06/2022 13:09:52 periodic repaints. 20/06/2022 13:09:52 20/06/2022 13:09:52 XKEYBOARD: number of keysyms per keycode 7 is greater 20/06/2022 13:09:52 than 4 and 51 keysyms are mapped above 4. 20/06/2022 13:09:52 Automatically switching to -xkb mode. 20/06/2022 13:09:52 If this makes the key mapping worse you can 20/06/2022 13:09:52 disable it with the "-noxkb" option. 20/06/2022 13:09:52 Also, remember "-remap DEAD" for accenting characters. 20/06/2022 13:09:52 20/06/2022 13:09:52 X FBPM extension not supported. Xlib: extension "DPMS" missing on display ":0". 20/06/2022 13:09:52 X display is not capable of DPMS. 20/06/2022 13:09:52 -------------------------------------------------------- 20/06/2022 13:09:52 20/06/2022 13:09:52 Default visual ID: 0x21 20/06/2022 13:09:52 Read initial data from X display into framebuffer. 20/06/2022 13:09:52 initialize_screen: fb_depth/fb_bpp/fb_Bpl 24/32/8160 20/06/2022 13:09:52 20/06/2022 13:09:52 starting ssl tunnel: /usr/bin/stunnel 5900 -> 5950 2022.06.20 13:09:52 LOG5[ui]: stunnel 5.44 on x86_64-pc-linux-gnu platform 2022.06.20 13:09:52 LOG5[ui]: Compiled/running with OpenSSL 1.1.1k 25 Mar 2021 2022.06.20 13:09:52 LOG5[ui]: Threading:PTHREAD Sockets:POLL,IPv6 TLS:ENGINE,FIPS,OCSP,PSK,SNI 2022.06.20 13:09:52 LOG5[ui]: Reading configuration from descriptor 3 2022.06.20 13:09:52 LOG5[ui]: UTF-8 byte order mark not detected 2022.06.20 13:09:52 LOG5[ui]: FIPS mode disabled 2022.06.20 13:09:52 LOG5[ui]: Configuration successful 20/06/2022 13:09:53 stunnel pid is: 7071 20/06/2022 13:09:53 20/06/2022 13:09:53 X display :0 is 32bpp depth=24 true color 20/06/2022 13:09:53 20/06/2022 13:09:53 Listening for VNC connections on TCP port 5950 20/06/2022 13:09:53 Listening for VNC connections on TCP6 port 5900 20/06/2022 13:09:53 Listening also on IPv6 port 5950 (socket 11) 20/06/2022 13:09:53 20/06/2022 13:09:53 Xinerama is present and active (e.g. multi-head). 20/06/2022 13:09:53 Xinerama: number of sub-screens: 1 20/06/2022 13:09:53 Xinerama: no blackouts needed (only one sub-screen) 20/06/2022 13:09:53 20/06/2022 13:09:53 fb read rate: 2565 MB/sec 20/06/2022 13:09:53 fast read: reset -wait ms to: 10 20/06/2022 13:09:53 fast read: reset -defer ms to: 10 20/06/2022 13:09:53 The X server says there are 10 mouse buttons. 20/06/2022 13:09:53 screen setup finished. 20/06/2022 13:09:53 The VNC desktop is: localhost:50 The SSL VNC desktop is: Tower:0 PORT=5950 SSLPORT=5900 ****************************************************************************** Have you tried the x11vnc '-ncache' VNC client-side pixel caching feature yet? The scheme stores pixel data offscreen on the VNC viewer side for faster retrieval. It should work with any VNC viewer. Try it by running: x11vnc -ncache 10 ... One can also add -ncache_cr for smooth 'copyrect' window motion. More info: http://www.karlrunge.com/x11vnc/faq.html#faq-client-caching [services.d] starting app... [app] starting JDownloader 2... [services.d] done. [jdsupervisor] JDownloader2 not started yet. Proceeding... 20/06/2022 13:09:56 Got connection from client 127.0.0.1 20/06/2022 13:09:56 other clients: 20/06/2022 13:09:56 Got 'ws' WebSockets handshake 20/06/2022 13:09:56 Got protocol: binary 20/06/2022 13:09:56 - webSocketsHandshake: using binary/raw encoding 20/06/2022 13:09:56 - WebSockets client version hybi-13 20/06/2022 13:09:56 check_access: client 127.0.0.1 matches host 127.0.0.1 20/06/2022 13:09:56 Disabled X server key autorepeat. 20/06/2022 13:09:56 to force back on run: 'xset r on' (3 times) 20/06/2022 13:09:56 incr accepted_client=1 for 127.0.0.1:49028 sock=12 20/06/2022 13:09:56 webSocketsDecodeHybi: got frame without mask <b>20/06/2022 13:09:56 rfbProcessClientProtocolVersion: read: I/O error</b> 20/06/2022 13:09:56 client_count: 0 20/06/2022 13:09:56 Restored X server key autorepeat to: 1 20/06/2022 13:09:56 Client 127.0.0.1 gone 20/06/2022 13:09:56 Statistics events Transmit/ RawEquiv ( saved) 20/06/2022 13:09:56 TOTALS : 0 | 0/ 0 ( 0.0%) 20/06/2022 13:09:56 Statistics events Received/ RawEquiv ( saved) 20/06/2022 13:09:56 TOTALS : 0 | 0/ 0 ( 0.0%) Any sugestions? PS: all settings are stock except the download location path In bridge mode, what do you have exactly when you try to connect ? Quote Link to comment
jpm Posted June 20, 2022 Share Posted June 20, 2022 12 minutes ago, Djoss said: In bridge mode, what do you have exactly when you try to connect ? Simply a black page. Unable to connect An error occurred during a connection to localip:7807. The site could be temporarily unavailable or too busy. Try again in a few moments. If you are unable to load any pages, check your computer’s network connection. If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.