[Support] Djoss - JDownloader 2


Recommended Posts

  • 3 weeks later...

hello, i am using your docker container and i cannot use the UI on my ipad or iphone unless the connection is unnectrypted. It seems like the interface is not touch friendly as i have to drag my finger on the screen and a mouse pointer shows up.

Is there a workaround for this?

thank you!

Link to comment
22 hours ago, Mr.meowgi said:

hello, i am using your docker container and i cannot use the UI on my ipad or iphone unless the connection is unnectrypted.

 

With encrypted connection, are you using a valid certificate ?  If not, this is a known behaviour on iOS where a secure WebSocket connection won't be done is certificate can't be successfully validated.

 

22 hours ago, Mr.meowgi said:

It seems like the interface is not touch friendly as i have to drag my finger on the screen and a mouse pointer shows up.

Is there a workaround for this?

 

Not sure to I understand the problem.  Don't forget that your are accessing a desktop application, not a mobile one.  So the web interface used to access the desktop application is mobile friendly, but not the application itself.

Link to comment
  • 2 weeks later...

Hi, I'm having issues with the docker seeming to set permissions as 770 for all created files on Private shares, even with the umask set to 000. This means that even users with read/write access on the shares the docker is writing to, they cannot read any file or directory created by the docker.

 

Is there any way to override the default permissions the docker is setting? Having to amend permissions every time the docker touches a file is not great. 

 

EDIT: Found that this was caused by remnants of being on Active Directory, but rather than being a permissions issue, it was an extended ACL issue. Using the command "setfacl -Rb /mnt/user/" resets the ACL on all user shares, then re-ran docker safe permissions tool and voilà, dockers are able to assign permissions as expected. 

Edited by Shinobu
Link to comment
  • 4 weeks later...

Hello everyone,

 

I updated my server with new hardware (mainboard and cpu) and now I couldn´t connect to my jdownloader web GUI anymore.

First I showed an error "could connect to the server" and now I could not even start the GUI. I changed the ports but the container always tries to open port 5800 even if this port isn´t assigned anywere (see the screenshot). 

 

The "strange" thing is docker itself is running, I can access it through the myjdownloader webinterface, so really just the docker GUI isn´t working.

 

I there anything I could try?

 

Thanks

 

jdown-ports.jpg

Edited by Bob@unraid
Link to comment
1 hour ago, Bob@unraid said:

Hello everyone,

 

I updated my server with new hardware (mainboard and cpu) and now I couldn´t connect to my jdownloader web GUI anymore.

First I showed an error "could connect to the server" and now I could not even start the GUI. I changed the ports but the container always tries to open port 5800 even if this port isn´t assigned anywere (see the screenshot). 

 

The "strange" thing is docker itself is running, I can access it through the myjdownloader webinterface, so really just the docker GUI isn´t working.

 

I there anything I could try?

 

Thanks

 

jdown-ports.jpg

The container port is always 5800.  It's the port on the host side that can be changed.

I would try to remove duplicated settings.  The initial error would have been solved by clearing your browser cache.

  • Thanks 1
Link to comment

Thanks for the fast reply Djoss!

 

I changed the host port, that´s what I ment and did. my fault.

 

I remove the duplicated settings and wipe the browser cache when I am at home after work. 

 

Write back later.

 

Edit:

I selected the wrong network "mode" yesterday.  I set it to bridge but the right one is my custom br0 network

Now it´s working again!

 

But a big thanks anyway!

 

 

Edited by Bob@unraid
Link to comment
  • 1 month later...

I have notices that since upgrading to 6.10 rc4 that I can no longer access the gui if i have accessed it previously. I receive an Error 1006. When i look in the logs I receive a notice about multiple xserver instances possibly running. Has anyone solved this?

Link to comment

Hey guys,

I am experiencing a strange thing: my cursor is doubled by the GUI. When I enter the web GUI it is working fine but the cursor is displayed twice and the second cursor is following the normal cursor with some delay. As I said the software is wokring fine but this issue is kind of annoying.

 

Does anybody have an idea how to get rid of it? Thanks!

Link to comment
  • 2 weeks later...

SOLVED - the issue was my VPN, for some reason it waited a reboot. once I did this, the it started to allow the traffic from my downloader to pass through it.

 

I am trying to force all my traffic through my binhex VPN, as I don't want people to see what I am doing, so I copied my settings from my other binhex dockers but for some reason it is still going through my normal router and no the VPN.

 

so within my downloader2 I have modify my setting with the following

image.png.106f3639e19ec3cc9e01e2c5fc1da96e.pngimage.png.7a9b7229c9f81d3b680f488846ab86e7.png

 

and within my delugevpn, I have added the following ports

image.png.a8d7abb75b47d62f28de71dd055816a5.pngimage.png.26ae5ad708ffeea9cd09bb9b8a7927f9.png

but when I add a file to donwload, it finds it with no issuse, but when it starts to download it is finding my external IP address and not my VPN IP address.

 

opps I forgot to add that my proxy is pointing to my unraid server IP address with a port of 8118

 

any ideals ?

 

 

Edited by chris_netsmart
Link to comment
On 4/2/2022 at 9:32 PM, Djoss said:

Did you try to clear your browser cache and/or access the UI via an incognito/private window ?

I tried clearing browser cache but no joy. I just tried accessing through an incognito window and it worked! Any idea why that is?

Link to comment
  • 1 month later...

Extremely dumb question. 

 

I installed the Docker container for JDownloader and can't find a way to feed the link that I want to donwload unless I type them by hand. 

 

All tutorials I have found are under a windows machine and older posts are about more advanced stuff. 

 

I imagine the link by loading a txt file or something on the web gui interface but can't find the option. 

Link to comment
16 hours ago, Rolox said:

Extremely dumb question. 

 

I installed the Docker container for JDownloader and can't find a way to feed the link that I want to donwload unless I type them by hand. 

 

All tutorials I have found are under a windows machine and older posts are about more advanced stuff. 

 

I imagine the link by loading a txt file or something on the web gui interface but can't find the option. 

You can copy/paste the link with the clipboard function.  However, the most easy way is to use MyJDownloader with the browser extension (https://my.jdownloader.org/apps/).

Link to comment
On 6/3/2022 at 9:13 PM, dancue said:

Any way to make it full screen on the page?

If you mean that the UI can resize automatically to your browser's window size, this is not yet possible.

However, if you configure the application's width and height to be bigger than your browser's window, then you should have something that can fill all the browser window.

Link to comment
2 minutes ago, Djoss said:

If you mean that the UI can resize automatically to your browser's window size, this is not yet possible.

However, if you configure the application's width and height to be bigger than your browser's window, then you should have something that can fill all the browser window.

How do I configure the application's width and height?

 

Link to comment
1 minute ago, dancue said:

How do I configure the application's width and height?

 

Edit the container's configuration, click "Show more settings..." and then you have "Display Width" and "Display Heigh" fields you can set.

Link to comment
Posted (edited)
3 minutes ago, Djoss said:

Edit the container's configuration, click "Show more settings..." and then you have "Display Width" and "Display Heigh" fields you can set.

Ok. I'll try that. 

 

Edit: That worked! Thanks! Looking forward to it auto scaling.

Edited by dancue
Link to comment
  • 2 weeks later...

Is anyone here using event scripter?  I am trying to make a script that will run a unix executable upon download completion however Jdownloader is giving me an error that it does not see the executable.  Here is the basic script I am trying to test (the unix executable is "extract-xiso" and is located in the output directory):

 

var extract = "/output/extract-xiso";
var file = "/output/test.iso";
callSync(extract, file);

 

extract-xiso is designed to extract the contents of a .iso file however I get the following error when I test run this script: "java.io.IOException: Cannot run program "/output/extract-xiso": error=2, No such file or directory"

 

Does anyone have an idea on what I might be doing wrong?  I have confirmed that extract-xiso is exectuable as I can execute it directly from Unraid terminal.

Link to comment

First i would like to say tha this is probably 100% my fault

Today i upgrade to unraid 6.10.3  and no longer have acess to the gui of jdownloader.

In bridge mode, i get nothing like the app didn't exits, no error on the log:
 

[s6-init] making user provided files available at /var/run/s6/etc...exited 0.
[s6-init] ensuring user provided files have correct perms...exited 0.
[fix-attrs.d] applying ownership & permissions fixes...
[fix-attrs.d] done.
[cont-init.d] executing container initialization scripts...
[cont-init.d] 00-app-niceness.sh: executing... 
[cont-init.d] 00-app-niceness.sh: exited 0.
[cont-init.d] 00-app-script.sh: executing... 
[cont-init.d] 00-app-script.sh: exited 0.
[cont-init.d] 00-app-user-map.sh: executing... 
[cont-init.d] 00-app-user-map.sh: exited 0.
[cont-init.d] 00-clean-logmonitor-states.sh: executing... 
[cont-init.d] 00-clean-logmonitor-states.sh: exited 0.
[cont-init.d] 00-clean-tmp-dir.sh: executing... 
[cont-init.d] 00-clean-tmp-dir.sh: exited 0.
[cont-init.d] 00-set-app-deps.sh: executing... 
[cont-init.d] 00-set-app-deps.sh: exited 0.
[cont-init.d] 00-set-home.sh: executing... 
[cont-init.d] 00-set-home.sh: exited 0.
[cont-init.d] 00-take-config-ownership.sh: executing... 
[cont-init.d] 00-take-config-ownership.sh: exited 0.
[cont-init.d] 00-xdg-runtime-dir.sh: executing... 
[cont-init.d] 00-xdg-runtime-dir.sh: exited 0.
[cont-init.d] 10-certs.sh: executing... 
[cont-init.d] 10-certs.sh: exited 0.
[cont-init.d] 10-cjk-font.sh: executing... 
[cont-init.d] 10-cjk-font.sh: exited 0.
[cont-init.d] 10-nginx.sh: executing... 
[cont-init.d] 10-nginx.sh: exited 0.
[cont-init.d] 10-vnc-password.sh: executing... 
[cont-init.d] 10-vnc-password.sh: exited 0.
[cont-init.d] 10-web-index.sh: executing... 
[cont-init.d] 10-web-index.sh: exited 0.
[cont-init.d] jdownloader2.sh: executing... 
[cont-init.d] jdownloader2.sh: exited 0.
[cont-init.d] done.
[services.d] starting services
[services.d] starting s6-fdholderd...
[services.d] starting certsmonitor...
[services.d] starting nginx...
[certsmonitor] starting...
[services.d] starting xvfb...
[nginx] starting...
[xvfb] starting...
[services.d] starting logmonitor...
[logmonitor] no file to monitor: disabling service...
s6-svwait: fatal: timed out
[services.d] starting statusmonitor...
[services.d] starting openbox...
[statusmonitor] no file to monitor: disabling service...
[openbox] starting...
[services.d] starting x11vnc...
[services.d] starting app...
[x11vnc] starting...
[app] starting JDownloader 2...
[services.d] done.
[jdsupervisor] JDownloader2 not started yet.  Proceeding...
20/06/2022 13:06:02 passing arg to libvncserver: -rfbport
20/06/2022 13:06:02 passing arg to libvncserver: 5900
20/06/2022 13:06:02 passing arg to libvncserver: -rfbportv6
20/06/2022 13:06:02 passing arg to libvncserver: -1
20/06/2022 13:06:02 passing arg to libvncserver: -httpportv6
20/06/2022 13:06:02 passing arg to libvncserver: -1
20/06/2022 13:06:02 passing arg to libvncserver: -desktop
20/06/2022 13:06:02 passing arg to libvncserver: JDownloader 2
20/06/2022 13:06:02 Setting -localhost in -stunnel mode.
20/06/2022 13:06:02 x11vnc version: 0.9.14 lastmod: 2015-11-14  pid: 6999
20/06/2022 13:06:02 Using X display :0
20/06/2022 13:06:02 rootwin: 0x43 reswin: 0x400001 dpy: 0x311d9b40
20/06/2022 13:06:02 
20/06/2022 13:06:02 ------------------ USEFUL INFORMATION ------------------
20/06/2022 13:06:02 X DAMAGE available on display, using it for polling hints.
20/06/2022 13:06:02   To disable this behavior use: '-noxdamage'
20/06/2022 13:06:02 
20/06/2022 13:06:02   Most compositing window managers like 'compiz' or 'beryl'
20/06/2022 13:06:02   cause X DAMAGE to fail, and so you may not see any screen
20/06/2022 13:06:02   updates via VNC.  Either disable 'compiz' (recommended) or
20/06/2022 13:06:02   supply the x11vnc '-noxdamage' command line option.
20/06/2022 13:06:02 X COMPOSITE available on display, using it for window polling.
20/06/2022 13:06:02   To disable this behavior use: '-noxcomposite'
20/06/2022 13:06:02 
20/06/2022 13:06:02 Wireframing: -wireframe mode is in effect for window moves.
20/06/2022 13:06:02   If this yields undesired behavior (poor response, painting
20/06/2022 13:06:02   errors, etc) it may be disabled:
20/06/2022 13:06:02    - use '-nowf' to disable wireframing completely.
20/06/2022 13:06:02    - use '-nowcr' to disable the Copy Rectangle after the
20/06/2022 13:06:02      moved window is released in the new position.
20/06/2022 13:06:02   Also see the -help entry for tuning parameters.
20/06/2022 13:06:02   You can press 3 Alt_L's (Left "Alt" key) in a row to 
20/06/2022 13:06:02   repaint the screen, also see the -fixscreen option for
20/06/2022 13:06:02   periodic repaints.
20/06/2022 13:06:02 GrabServer control via XTEST.
20/06/2022 13:06:02 
20/06/2022 13:06:02 Scroll Detection: -scrollcopyrect mode is in effect to
20/06/2022 13:06:02   use RECORD extension to try to detect scrolling windows
20/06/2022 13:06:02   (induced by either user keystroke or mouse input).
20/06/2022 13:06:02   If this yields undesired behavior (poor response, painting
20/06/2022 13:06:02   errors, etc) it may be disabled via: '-noscr'
20/06/2022 13:06:02   Also see the -help entry for tuning parameters.
20/06/2022 13:06:02   You can press 3 Alt_L's (Left "Alt" key) in a row to 
20/06/2022 13:06:02   repaint the screen, also see the -fixscreen option for
20/06/2022 13:06:02   periodic repaints.
20/06/2022 13:06:02 
20/06/2022 13:06:02 XKEYBOARD: number of keysyms per keycode 7 is greater
20/06/2022 13:06:02   than 4 and 51 keysyms are mapped above 4.
20/06/2022 13:06:02   Automatically switching to -xkb mode.
20/06/2022 13:06:02   If this makes the key mapping worse you can
20/06/2022 13:06:02   disable it with the "-noxkb" option.
20/06/2022 13:06:02   Also, remember "-remap DEAD" for accenting characters.
20/06/2022 13:06:02 
20/06/2022 13:06:02 X FBPM extension not supported.
Xlib:  extension "DPMS" missing on display ":0".
20/06/2022 13:06:02 X display is not capable of DPMS.
20/06/2022 13:06:02 --------------------------------------------------------
20/06/2022 13:06:02 
20/06/2022 13:06:02 Default visual ID: 0x21
20/06/2022 13:06:02 Read initial data from X display into framebuffer.
20/06/2022 13:06:02 initialize_screen: fb_depth/fb_bpp/fb_Bpl 24/32/8160
20/06/2022 13:06:02 
20/06/2022 13:06:02 starting ssl tunnel: /usr/bin/stunnel  5900 -> 5950
2022.06.20 13:06:02 LOG5[ui]: stunnel 5.44 on x86_64-pc-linux-gnu platform
2022.06.20 13:06:02 LOG5[ui]: Compiled/running with OpenSSL 1.1.1k  25 Mar 2021
2022.06.20 13:06:02 LOG5[ui]: Threading:PTHREAD Sockets:POLL,IPv6 TLS:ENGINE,FIPS,OCSP,PSK,SNI
2022.06.20 13:06:02 LOG5[ui]: Reading configuration from descriptor 3
2022.06.20 13:06:02 LOG5[ui]: UTF-8 byte order mark not detected
2022.06.20 13:06:02 LOG5[ui]: FIPS mode disabled
2022.06.20 13:06:02 LOG5[ui]: Configuration successful
20/06/2022 13:06:03 stunnel pid is: 7050
20/06/2022 13:06:03 
20/06/2022 13:06:03 X display :0 is 32bpp depth=24 true color
20/06/2022 13:06:03 
20/06/2022 13:06:03 Listening for VNC connections on TCP port 5950
20/06/2022 13:06:03 
20/06/2022 13:06:03 Xinerama is present and active (e.g. multi-head).
20/06/2022 13:06:03 Xinerama: number of sub-screens: 1
20/06/2022 13:06:03 Xinerama: no blackouts needed (only one sub-screen)
20/06/2022 13:06:03 
20/06/2022 13:06:03 fb read rate: 2439 MB/sec
20/06/2022 13:06:03 fast read: reset -wait  ms to: 10
20/06/2022 13:06:03 fast read: reset -defer ms to: 10
20/06/2022 13:06:03 The X server says there are 10 mouse buttons.
20/06/2022 13:06:03 screen setup finished.
20/06/2022 13:06:03 

The VNC desktop is:      localhost:50

The SSL VNC desktop is:  132e6e96067b:0
PORT=5950
SSLPORT=5900

******************************************************************************
Have you tried the x11vnc '-ncache' VNC client-side pixel caching feature yet?

The scheme stores pixel data offscreen on the VNC viewer side for faster
retrieval.  It should work with any VNC viewer.  Try it by running:

    x11vnc -ncache 10 ...

One can also add -ncache_cr for smooth 'copyrect' window motion.
More info: http://www.karlrunge.com/x11vnc/faq.html#faq-client-caching

 

 

I have tried incognito mode as sugested on the topic with the same result.


If i'm on host mode and therefore port 5800  i get an error:

 

20/06/2022 13:09:52   If this yields undesired behavior (poor response, painting
20/06/2022 13:09:52   errors, etc) it may be disabled via: '-noscr'
20/06/2022 13:09:52   Also see the -help entry for tuning parameters.
20/06/2022 13:09:52   You can press 3 Alt_L's (Left "Alt" key) in a row to 
20/06/2022 13:09:52   repaint the screen, also see the -fixscreen option for
20/06/2022 13:09:52   periodic repaints.
20/06/2022 13:09:52 
20/06/2022 13:09:52 XKEYBOARD: number of keysyms per keycode 7 is greater
20/06/2022 13:09:52   than 4 and 51 keysyms are mapped above 4.
20/06/2022 13:09:52   Automatically switching to -xkb mode.
20/06/2022 13:09:52   If this makes the key mapping worse you can
20/06/2022 13:09:52   disable it with the "-noxkb" option.
20/06/2022 13:09:52   Also, remember "-remap DEAD" for accenting characters.
20/06/2022 13:09:52 
20/06/2022 13:09:52 X FBPM extension not supported.
Xlib:  extension "DPMS" missing on display ":0".
20/06/2022 13:09:52 X display is not capable of DPMS.
20/06/2022 13:09:52 --------------------------------------------------------
20/06/2022 13:09:52 
20/06/2022 13:09:52 Default visual ID: 0x21
20/06/2022 13:09:52 Read initial data from X display into framebuffer.
20/06/2022 13:09:52 initialize_screen: fb_depth/fb_bpp/fb_Bpl 24/32/8160
20/06/2022 13:09:52 
20/06/2022 13:09:52 starting ssl tunnel: /usr/bin/stunnel  5900 -> 5950
2022.06.20 13:09:52 LOG5[ui]: stunnel 5.44 on x86_64-pc-linux-gnu platform
2022.06.20 13:09:52 LOG5[ui]: Compiled/running with OpenSSL 1.1.1k  25 Mar 2021
2022.06.20 13:09:52 LOG5[ui]: Threading:PTHREAD Sockets:POLL,IPv6 TLS:ENGINE,FIPS,OCSP,PSK,SNI
2022.06.20 13:09:52 LOG5[ui]: Reading configuration from descriptor 3
2022.06.20 13:09:52 LOG5[ui]: UTF-8 byte order mark not detected
2022.06.20 13:09:52 LOG5[ui]: FIPS mode disabled
2022.06.20 13:09:52 LOG5[ui]: Configuration successful
20/06/2022 13:09:53 stunnel pid is: 7071
20/06/2022 13:09:53 
20/06/2022 13:09:53 X display :0 is 32bpp depth=24 true color
20/06/2022 13:09:53 
20/06/2022 13:09:53 Listening for VNC connections on TCP port 5950
20/06/2022 13:09:53 Listening for VNC connections on TCP6 port 5900
20/06/2022 13:09:53 Listening also on IPv6 port 5950 (socket 11)
20/06/2022 13:09:53 
20/06/2022 13:09:53 Xinerama is present and active (e.g. multi-head).
20/06/2022 13:09:53 Xinerama: number of sub-screens: 1
20/06/2022 13:09:53 Xinerama: no blackouts needed (only one sub-screen)
20/06/2022 13:09:53 
20/06/2022 13:09:53 fb read rate: 2565 MB/sec
20/06/2022 13:09:53 fast read: reset -wait  ms to: 10
20/06/2022 13:09:53 fast read: reset -defer ms to: 10
20/06/2022 13:09:53 The X server says there are 10 mouse buttons.
20/06/2022 13:09:53 screen setup finished.
20/06/2022 13:09:53 

The VNC desktop is:      localhost:50

The SSL VNC desktop is:  Tower:0
PORT=5950
SSLPORT=5900

******************************************************************************
Have you tried the x11vnc '-ncache' VNC client-side pixel caching feature yet?

The scheme stores pixel data offscreen on the VNC viewer side for faster
retrieval.  It should work with any VNC viewer.  Try it by running:

    x11vnc -ncache 10 ...

One can also add -ncache_cr for smooth 'copyrect' window motion.
More info: http://www.karlrunge.com/x11vnc/faq.html#faq-client-caching

[services.d] starting app...
[app] starting JDownloader 2...
[services.d] done.
[jdsupervisor] JDownloader2 not started yet.  Proceeding...
20/06/2022 13:09:56 Got connection from client 127.0.0.1
20/06/2022 13:09:56   other clients:
20/06/2022 13:09:56 Got 'ws' WebSockets handshake
20/06/2022 13:09:56 Got protocol: binary
20/06/2022 13:09:56   - webSocketsHandshake: using binary/raw encoding
20/06/2022 13:09:56   - WebSockets client version hybi-13
20/06/2022 13:09:56 check_access: client 127.0.0.1 matches host 127.0.0.1
20/06/2022 13:09:56 Disabled X server key autorepeat.
20/06/2022 13:09:56   to force back on run: 'xset r on' (3 times)
20/06/2022 13:09:56 incr accepted_client=1 for 127.0.0.1:49028  sock=12
20/06/2022 13:09:56 webSocketsDecodeHybi: got frame without mask
<b>20/06/2022 13:09:56 rfbProcessClientProtocolVersion: read: I/O error</b>
20/06/2022 13:09:56 client_count: 0
20/06/2022 13:09:56 Restored X server key autorepeat to: 1
20/06/2022 13:09:56 Client 127.0.0.1 gone
20/06/2022 13:09:56 Statistics             events    Transmit/ RawEquiv ( saved)
20/06/2022 13:09:56  TOTALS              :      0 |         0/        0 (  0.0%)
20/06/2022 13:09:56 Statistics             events    Received/ RawEquiv ( saved)
20/06/2022 13:09:56  TOTALS              :      0 |         0/        0 (  0.0%)

 

 

 

Any sugestions?

PS: all settings are stock except the download location path

Edited by jpm
adding explanation
Link to comment
On 6/17/2022 at 11:11 AM, misterbeetz said:

Is anyone here using event scripter?  I am trying to make a script that will run a unix executable upon download completion however Jdownloader is giving me an error that it does not see the executable.  Here is the basic script I am trying to test (the unix executable is "extract-xiso" and is located in the output directory):

 

var extract = "/output/extract-xiso";
var file = "/output/test.iso";
callSync(extract, file);

 

extract-xiso is designed to extract the contents of a .iso file however I get the following error when I test run this script: "java.io.IOException: Cannot run program "/output/extract-xiso": error=2, No such file or directory"

 

Does anyone have an idea on what I might be doing wrong?  I have confirmed that extract-xiso is exectuable as I can execute it directly from Unraid terminal.

 

Maybe a permission issue ? Can you share the output of "docker exec JDownloader2 ls -l /output/extract-xiso" ?

Link to comment
51 minutes ago, jpm said:

First i would like to say tha this is probably 100% my fault

Today i upgrade to unraid 6.10.3  and no longer have acess to the gui of jdownloader.

In bridge mode, i get nothing like the app didn't exits, no error on the log:
 

[s6-init] making user provided files available at /var/run/s6/etc...exited 0.
[s6-init] ensuring user provided files have correct perms...exited 0.
[fix-attrs.d] applying ownership & permissions fixes...
[fix-attrs.d] done.
[cont-init.d] executing container initialization scripts...
[cont-init.d] 00-app-niceness.sh: executing... 
[cont-init.d] 00-app-niceness.sh: exited 0.
[cont-init.d] 00-app-script.sh: executing... 
[cont-init.d] 00-app-script.sh: exited 0.
[cont-init.d] 00-app-user-map.sh: executing... 
[cont-init.d] 00-app-user-map.sh: exited 0.
[cont-init.d] 00-clean-logmonitor-states.sh: executing... 
[cont-init.d] 00-clean-logmonitor-states.sh: exited 0.
[cont-init.d] 00-clean-tmp-dir.sh: executing... 
[cont-init.d] 00-clean-tmp-dir.sh: exited 0.
[cont-init.d] 00-set-app-deps.sh: executing... 
[cont-init.d] 00-set-app-deps.sh: exited 0.
[cont-init.d] 00-set-home.sh: executing... 
[cont-init.d] 00-set-home.sh: exited 0.
[cont-init.d] 00-take-config-ownership.sh: executing... 
[cont-init.d] 00-take-config-ownership.sh: exited 0.
[cont-init.d] 00-xdg-runtime-dir.sh: executing... 
[cont-init.d] 00-xdg-runtime-dir.sh: exited 0.
[cont-init.d] 10-certs.sh: executing... 
[cont-init.d] 10-certs.sh: exited 0.
[cont-init.d] 10-cjk-font.sh: executing... 
[cont-init.d] 10-cjk-font.sh: exited 0.
[cont-init.d] 10-nginx.sh: executing... 
[cont-init.d] 10-nginx.sh: exited 0.
[cont-init.d] 10-vnc-password.sh: executing... 
[cont-init.d] 10-vnc-password.sh: exited 0.
[cont-init.d] 10-web-index.sh: executing... 
[cont-init.d] 10-web-index.sh: exited 0.
[cont-init.d] jdownloader2.sh: executing... 
[cont-init.d] jdownloader2.sh: exited 0.
[cont-init.d] done.
[services.d] starting services
[services.d] starting s6-fdholderd...
[services.d] starting certsmonitor...
[services.d] starting nginx...
[certsmonitor] starting...
[services.d] starting xvfb...
[nginx] starting...
[xvfb] starting...
[services.d] starting logmonitor...
[logmonitor] no file to monitor: disabling service...
s6-svwait: fatal: timed out
[services.d] starting statusmonitor...
[services.d] starting openbox...
[statusmonitor] no file to monitor: disabling service...
[openbox] starting...
[services.d] starting x11vnc...
[services.d] starting app...
[x11vnc] starting...
[app] starting JDownloader 2...
[services.d] done.
[jdsupervisor] JDownloader2 not started yet.  Proceeding...
20/06/2022 13:06:02 passing arg to libvncserver: -rfbport
20/06/2022 13:06:02 passing arg to libvncserver: 5900
20/06/2022 13:06:02 passing arg to libvncserver: -rfbportv6
20/06/2022 13:06:02 passing arg to libvncserver: -1
20/06/2022 13:06:02 passing arg to libvncserver: -httpportv6
20/06/2022 13:06:02 passing arg to libvncserver: -1
20/06/2022 13:06:02 passing arg to libvncserver: -desktop
20/06/2022 13:06:02 passing arg to libvncserver: JDownloader 2
20/06/2022 13:06:02 Setting -localhost in -stunnel mode.
20/06/2022 13:06:02 x11vnc version: 0.9.14 lastmod: 2015-11-14  pid: 6999
20/06/2022 13:06:02 Using X display :0
20/06/2022 13:06:02 rootwin: 0x43 reswin: 0x400001 dpy: 0x311d9b40
20/06/2022 13:06:02 
20/06/2022 13:06:02 ------------------ USEFUL INFORMATION ------------------
20/06/2022 13:06:02 X DAMAGE available on display, using it for polling hints.
20/06/2022 13:06:02   To disable this behavior use: '-noxdamage'
20/06/2022 13:06:02 
20/06/2022 13:06:02   Most compositing window managers like 'compiz' or 'beryl'
20/06/2022 13:06:02   cause X DAMAGE to fail, and so you may not see any screen
20/06/2022 13:06:02   updates via VNC.  Either disable 'compiz' (recommended) or
20/06/2022 13:06:02   supply the x11vnc '-noxdamage' command line option.
20/06/2022 13:06:02 X COMPOSITE available on display, using it for window polling.
20/06/2022 13:06:02   To disable this behavior use: '-noxcomposite'
20/06/2022 13:06:02 
20/06/2022 13:06:02 Wireframing: -wireframe mode is in effect for window moves.
20/06/2022 13:06:02   If this yields undesired behavior (poor response, painting
20/06/2022 13:06:02   errors, etc) it may be disabled:
20/06/2022 13:06:02    - use '-nowf' to disable wireframing completely.
20/06/2022 13:06:02    - use '-nowcr' to disable the Copy Rectangle after the
20/06/2022 13:06:02      moved window is released in the new position.
20/06/2022 13:06:02   Also see the -help entry for tuning parameters.
20/06/2022 13:06:02   You can press 3 Alt_L's (Left "Alt" key) in a row to 
20/06/2022 13:06:02   repaint the screen, also see the -fixscreen option for
20/06/2022 13:06:02   periodic repaints.
20/06/2022 13:06:02 GrabServer control via XTEST.
20/06/2022 13:06:02 
20/06/2022 13:06:02 Scroll Detection: -scrollcopyrect mode is in effect to
20/06/2022 13:06:02   use RECORD extension to try to detect scrolling windows
20/06/2022 13:06:02   (induced by either user keystroke or mouse input).
20/06/2022 13:06:02   If this yields undesired behavior (poor response, painting
20/06/2022 13:06:02   errors, etc) it may be disabled via: '-noscr'
20/06/2022 13:06:02   Also see the -help entry for tuning parameters.
20/06/2022 13:06:02   You can press 3 Alt_L's (Left "Alt" key) in a row to 
20/06/2022 13:06:02   repaint the screen, also see the -fixscreen option for
20/06/2022 13:06:02   periodic repaints.
20/06/2022 13:06:02 
20/06/2022 13:06:02 XKEYBOARD: number of keysyms per keycode 7 is greater
20/06/2022 13:06:02   than 4 and 51 keysyms are mapped above 4.
20/06/2022 13:06:02   Automatically switching to -xkb mode.
20/06/2022 13:06:02   If this makes the key mapping worse you can
20/06/2022 13:06:02   disable it with the "-noxkb" option.
20/06/2022 13:06:02   Also, remember "-remap DEAD" for accenting characters.
20/06/2022 13:06:02 
20/06/2022 13:06:02 X FBPM extension not supported.
Xlib:  extension "DPMS" missing on display ":0".
20/06/2022 13:06:02 X display is not capable of DPMS.
20/06/2022 13:06:02 --------------------------------------------------------
20/06/2022 13:06:02 
20/06/2022 13:06:02 Default visual ID: 0x21
20/06/2022 13:06:02 Read initial data from X display into framebuffer.
20/06/2022 13:06:02 initialize_screen: fb_depth/fb_bpp/fb_Bpl 24/32/8160
20/06/2022 13:06:02 
20/06/2022 13:06:02 starting ssl tunnel: /usr/bin/stunnel  5900 -> 5950
2022.06.20 13:06:02 LOG5[ui]: stunnel 5.44 on x86_64-pc-linux-gnu platform
2022.06.20 13:06:02 LOG5[ui]: Compiled/running with OpenSSL 1.1.1k  25 Mar 2021
2022.06.20 13:06:02 LOG5[ui]: Threading:PTHREAD Sockets:POLL,IPv6 TLS:ENGINE,FIPS,OCSP,PSK,SNI
2022.06.20 13:06:02 LOG5[ui]: Reading configuration from descriptor 3
2022.06.20 13:06:02 LOG5[ui]: UTF-8 byte order mark not detected
2022.06.20 13:06:02 LOG5[ui]: FIPS mode disabled
2022.06.20 13:06:02 LOG5[ui]: Configuration successful
20/06/2022 13:06:03 stunnel pid is: 7050
20/06/2022 13:06:03 
20/06/2022 13:06:03 X display :0 is 32bpp depth=24 true color
20/06/2022 13:06:03 
20/06/2022 13:06:03 Listening for VNC connections on TCP port 5950
20/06/2022 13:06:03 
20/06/2022 13:06:03 Xinerama is present and active (e.g. multi-head).
20/06/2022 13:06:03 Xinerama: number of sub-screens: 1
20/06/2022 13:06:03 Xinerama: no blackouts needed (only one sub-screen)
20/06/2022 13:06:03 
20/06/2022 13:06:03 fb read rate: 2439 MB/sec
20/06/2022 13:06:03 fast read: reset -wait  ms to: 10
20/06/2022 13:06:03 fast read: reset -defer ms to: 10
20/06/2022 13:06:03 The X server says there are 10 mouse buttons.
20/06/2022 13:06:03 screen setup finished.
20/06/2022 13:06:03 

The VNC desktop is:      localhost:50

The SSL VNC desktop is:  132e6e96067b:0
PORT=5950
SSLPORT=5900

******************************************************************************
Have you tried the x11vnc '-ncache' VNC client-side pixel caching feature yet?

The scheme stores pixel data offscreen on the VNC viewer side for faster
retrieval.  It should work with any VNC viewer.  Try it by running:

    x11vnc -ncache 10 ...

One can also add -ncache_cr for smooth 'copyrect' window motion.
More info: http://www.karlrunge.com/x11vnc/faq.html#faq-client-caching

 

 

I have tried incognito mode as sugested on the topic with the same result.


If i'm on host mode and therefore port 5800  i get an error:

 

20/06/2022 13:09:52   If this yields undesired behavior (poor response, painting
20/06/2022 13:09:52   errors, etc) it may be disabled via: '-noscr'
20/06/2022 13:09:52   Also see the -help entry for tuning parameters.
20/06/2022 13:09:52   You can press 3 Alt_L's (Left "Alt" key) in a row to 
20/06/2022 13:09:52   repaint the screen, also see the -fixscreen option for
20/06/2022 13:09:52   periodic repaints.
20/06/2022 13:09:52 
20/06/2022 13:09:52 XKEYBOARD: number of keysyms per keycode 7 is greater
20/06/2022 13:09:52   than 4 and 51 keysyms are mapped above 4.
20/06/2022 13:09:52   Automatically switching to -xkb mode.
20/06/2022 13:09:52   If this makes the key mapping worse you can
20/06/2022 13:09:52   disable it with the "-noxkb" option.
20/06/2022 13:09:52   Also, remember "-remap DEAD" for accenting characters.
20/06/2022 13:09:52 
20/06/2022 13:09:52 X FBPM extension not supported.
Xlib:  extension "DPMS" missing on display ":0".
20/06/2022 13:09:52 X display is not capable of DPMS.
20/06/2022 13:09:52 --------------------------------------------------------
20/06/2022 13:09:52 
20/06/2022 13:09:52 Default visual ID: 0x21
20/06/2022 13:09:52 Read initial data from X display into framebuffer.
20/06/2022 13:09:52 initialize_screen: fb_depth/fb_bpp/fb_Bpl 24/32/8160
20/06/2022 13:09:52 
20/06/2022 13:09:52 starting ssl tunnel: /usr/bin/stunnel  5900 -> 5950
2022.06.20 13:09:52 LOG5[ui]: stunnel 5.44 on x86_64-pc-linux-gnu platform
2022.06.20 13:09:52 LOG5[ui]: Compiled/running with OpenSSL 1.1.1k  25 Mar 2021
2022.06.20 13:09:52 LOG5[ui]: Threading:PTHREAD Sockets:POLL,IPv6 TLS:ENGINE,FIPS,OCSP,PSK,SNI
2022.06.20 13:09:52 LOG5[ui]: Reading configuration from descriptor 3
2022.06.20 13:09:52 LOG5[ui]: UTF-8 byte order mark not detected
2022.06.20 13:09:52 LOG5[ui]: FIPS mode disabled
2022.06.20 13:09:52 LOG5[ui]: Configuration successful
20/06/2022 13:09:53 stunnel pid is: 7071
20/06/2022 13:09:53 
20/06/2022 13:09:53 X display :0 is 32bpp depth=24 true color
20/06/2022 13:09:53 
20/06/2022 13:09:53 Listening for VNC connections on TCP port 5950
20/06/2022 13:09:53 Listening for VNC connections on TCP6 port 5900
20/06/2022 13:09:53 Listening also on IPv6 port 5950 (socket 11)
20/06/2022 13:09:53 
20/06/2022 13:09:53 Xinerama is present and active (e.g. multi-head).
20/06/2022 13:09:53 Xinerama: number of sub-screens: 1
20/06/2022 13:09:53 Xinerama: no blackouts needed (only one sub-screen)
20/06/2022 13:09:53 
20/06/2022 13:09:53 fb read rate: 2565 MB/sec
20/06/2022 13:09:53 fast read: reset -wait  ms to: 10
20/06/2022 13:09:53 fast read: reset -defer ms to: 10
20/06/2022 13:09:53 The X server says there are 10 mouse buttons.
20/06/2022 13:09:53 screen setup finished.
20/06/2022 13:09:53 

The VNC desktop is:      localhost:50

The SSL VNC desktop is:  Tower:0
PORT=5950
SSLPORT=5900

******************************************************************************
Have you tried the x11vnc '-ncache' VNC client-side pixel caching feature yet?

The scheme stores pixel data offscreen on the VNC viewer side for faster
retrieval.  It should work with any VNC viewer.  Try it by running:

    x11vnc -ncache 10 ...

One can also add -ncache_cr for smooth 'copyrect' window motion.
More info: http://www.karlrunge.com/x11vnc/faq.html#faq-client-caching

[services.d] starting app...
[app] starting JDownloader 2...
[services.d] done.
[jdsupervisor] JDownloader2 not started yet.  Proceeding...
20/06/2022 13:09:56 Got connection from client 127.0.0.1
20/06/2022 13:09:56   other clients:
20/06/2022 13:09:56 Got 'ws' WebSockets handshake
20/06/2022 13:09:56 Got protocol: binary
20/06/2022 13:09:56   - webSocketsHandshake: using binary/raw encoding
20/06/2022 13:09:56   - WebSockets client version hybi-13
20/06/2022 13:09:56 check_access: client 127.0.0.1 matches host 127.0.0.1
20/06/2022 13:09:56 Disabled X server key autorepeat.
20/06/2022 13:09:56   to force back on run: 'xset r on' (3 times)
20/06/2022 13:09:56 incr accepted_client=1 for 127.0.0.1:49028  sock=12
20/06/2022 13:09:56 webSocketsDecodeHybi: got frame without mask
<b>20/06/2022 13:09:56 rfbProcessClientProtocolVersion: read: I/O error</b>
20/06/2022 13:09:56 client_count: 0
20/06/2022 13:09:56 Restored X server key autorepeat to: 1
20/06/2022 13:09:56 Client 127.0.0.1 gone
20/06/2022 13:09:56 Statistics             events    Transmit/ RawEquiv ( saved)
20/06/2022 13:09:56  TOTALS              :      0 |         0/        0 (  0.0%)
20/06/2022 13:09:56 Statistics             events    Received/ RawEquiv ( saved)
20/06/2022 13:09:56  TOTALS              :      0 |         0/        0 (  0.0%)

 

 

 

Any sugestions?

PS: all settings are stock except the download location path

 

In bridge mode, what do you have exactly when you try to connect ?

Link to comment
12 minutes ago, Djoss said:

 

In bridge mode, what do you have exactly when you try to connect ?

Simply a black page.

 

Unable to connect

An error occurred during a connection to localip:7807.

    The site could be temporarily unavailable or too busy. Try again in a few moments.
    If you are unable to load any pages, check your computer’s network connection.
    If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.

 

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.