Im newer to all of this and just trying to get a base system to run and then figure out how to use the rest of it. But when i boot up my Vm I have 2 problems but i dont know if they are the same Problem or not. Ive looked around a bit to try and find a solution and i have yet to find anything. If anyone can give me any insight on how to get this to work that would be amazing.

 

Specs

Processor: I5 4670

Motherboard: MSI Z87-G45

Ram: 20GB

I have 2 amd Gpus and a Gtx 760 

 

 

Problem:

-Once I boot into the vm the screen goes black

- My Graphics cards are in the same IOMMU group and i have no clue on how to change that to give them their own groups.

IOMMU group 0
	[8086:0c00] 00:00.0 Host bridge: Intel Corporation 4th Gen Core Processor DRAM Controller (rev 06)
IOMMU group 1
	[8086:0c01] 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06)
	[8086:0c05] 00:01.1 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x8 Controller (rev 06)
	[8086:0c09] 00:01.2 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x4 Controller (rev 06)
	[1002:95c0] 01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV620 PRO [Radeon HD 3470]
	[10de:1187] 02:00.0 VGA compatible controller: NVIDIA Corporation GK104 [GeForce GTX 760] (rev a1)
	[10de:0e0a] 02:00.1 Audio device: NVIDIA Corporation GK104 HDMI Audio Controller (rev a1)
	[1002:6771] 03:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Caicos XTX [Radeon HD 8490 / R5 235X OEM]
	[1002:aa98] 03:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Caicos HDMI Audio [Radeon HD 6450 / 7450/8450/8490 OEM / R5 230/235/235X OEM]
IOMMU group 2
	[8086:0412] 00:02.0 Display controller: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller (rev 06)
IOMMU group 3
	[8086:0c0c] 00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
IOMMU group 4
	[8086:8c31] 00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05)
IOMMU group 5
	[8086:8c3a] 00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
IOMMU group 6
	[8086:8c2d] 00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 05)
IOMMU group 7
	[8086:8c20] 00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)
IOMMU group 8
	[8086:8c10] 00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d5)
IOMMU group 9
	[8086:8c16] 00:1c.3 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 (rev d5)
IOMMU group 10
	[8086:8c26] 00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 05)
IOMMU group 11
	[8086:8c44] 00:1f.0 ISA bridge: Intel Corporation Z87 Express LPC Controller (rev 05)
	[8086:8c02] 00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05)
	[8086:8c22] 00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05)
IOMMU group 12
	[1969:e091] 05:00.0 Ethernet controller: Qualcomm Atheros Killer E220x Gigabit Ethernet Controller (rev 13)

Edited July 20, 20178 yr by K.Inderhees

Try enabling the ACS override in the vm settings. That should hopefully separate the cards into their own groups. 

It worked thank you so much. I was mind boggled on that so much and the methods I saw online were so complex and annoying and i didnt see the effort