simpic Posted July 22, 2017 Share Posted July 22, 2017 Hi, One of the disks in the array is showing a red x and is disabled. When i I run a SMART test on it the result is all clear. Many idea what's causing this? Quote Link to comment
SSD Posted July 22, 2017 Share Posted July 22, 2017 Post your diagnostics file. Quote Link to comment
simpic Posted July 24, 2017 Author Share Posted July 24, 2017 Here you go... smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.9.30-unRAID] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Constellation ES.2 (SATA 6Gb/s) Device Model: ST33000650NS Serial Number: 9XK0HRB1 LU WWN Device Id: 5 000c50 02e3f7c35 Firmware Version: 0004 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Mon Jul 24 08:49:21 2017 BST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 609) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 447) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x10bd) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 082 063 044 Pre-fail Always - 182480560 3 Spin_Up_Time 0x0003 091 089 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 095 095 020 Old_age Always - 5218 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 7 7 Seek_Error_Rate 0x000f 059 050 030 Pre-fail Always - 90210093511 9 Power_On_Hours 0x0032 063 063 000 Old_age Always - 33024 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 176 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 8590065666 189 High_Fly_Writes 0x003a 087 087 000 Old_age Always - 13 190 Airflow_Temperature_Cel 0x0022 068 031 045 Old_age Always In_the_past 32 (Min/Max 32/48 #6399) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 109 193 Load_Cycle_Count 0x0032 098 098 000 Old_age Always - 5439 194 Temperature_Celsius 0x0022 032 069 000 Old_age Always - 32 (0 17 0 0 0) 195 Hardware_ECC_Recovered 0x001a 022 006 000 Old_age Always - 182480560 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 4 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 4 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 32970 - # 2 Short offline Completed without error 00% 32907 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. Quote Link to comment
itimpi Posted July 24, 2017 Share Posted July 24, 2017 That disk is showing some signs of problems as the Pending sectors is non-zero so read-errors are to be expected. There are also a few reallocated sectors which is not always a problem but is often a sign of potential future problems. You should post the complete diagnostics (Tools->Diagnostics) zip file as that contains much more information to help isolate the problem. Quote Link to comment
simpic Posted July 24, 2017 Author Share Posted July 24, 2017 2 minutes ago, itimpi said: That disk is showing some signs of problems as the Pending sectors is non-zero so read-errors are to be expected. There are also a few reallocated sectors which is not always a problem but is often a sign of potential future problems. You should post the complete diagnostics (Tools->Diagnostics) zip file as that contains much more information to help isolate the problem. Ok, downloading it now. Quote Link to comment
simpic Posted July 24, 2017 Author Share Posted July 24, 2017 8 minutes ago, itimpi said: That disk is showing some signs of problems as the Pending sectors is non-zero so read-errors are to be expected. There are also a few reallocated sectors which is not always a problem but is often a sign of potential future problems. You should post the complete diagnostics (Tools->Diagnostics) zip file as that contains much more information to help isolate the problem. Ok, downloading it now. unraid-diagnostics-20170724-0857.zip Quote Link to comment
seagate_surfer Posted July 25, 2017 Share Posted July 25, 2017 You can also use Seagate's diagnostic utility SeaTools to check on the drive's health. If needed, you can get in touch directly with Seagate Customer Support here. Quote Link to comment
trurl Posted July 25, 2017 Share Posted July 25, 2017 1 hour ago, seagate_surfer said: You can also use Seagate's diagnostic utility SeaTools to check on the drive's health. If needed, you can get in touch directly with Seagate Customer Support here. You should rebuild to another drive before you do anything. Do you have Notifications configured? It should have notified you about the pending sectors. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.