[SOLVED] SMART Failure on Pre-Cleared drive...should it go into the array?


Recommended Posts

Hello,

 

I purchased 2 new drives from Amazon last week. I started the pre-clearing process which finished successfully after 2 days.

 

The problem I am now facing seems to be an issue with the SMART report.

 

When I try to run a report it say 

Quote

 

Errors occurred - Check SMART report

 

If I look at the history I see this:

Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed: read failure       90%        62         3385911640
# 2  Extended offline    Completed: read failure       90%        62         3385911640
# 3  Short offline       Completed: read failure       90%        62         3385904704
# 4  Extended offline    Completed: read failure       90%        62         3385911640
# 5  Extended offline    Completed: read failure       90%        62         3385904704
# 6  Short offline       Completed: read failure       10%        18         2503511816

I then looked at the SMART error log and it has the following:

ATA Error Count: 15319 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 15319 occurred at disk power-on lifetime: 51 hours (2 days + 3 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 53 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 00 ff ff ff ef 00   2d+03:11:04.789  READ DMA EXT
  25 00 00 ff ff ff ef 00   2d+03:11:04.767  READ DMA EXT
  25 00 00 ff ff ff ef 00   2d+03:11:02.523  READ DMA EXT
  25 00 00 ff ff ff ef 00   2d+03:11:02.425  READ DMA EXT
  25 00 00 ff ff ff ef 00   2d+03:10:59.427  READ DMA EXT

Error 15318 occurred at disk power-on lifetime: 51 hours (2 days + 3 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 53 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 00 ff ff ff ef 00   2d+03:10:29.708  READ DMA EXT
  25 00 00 ff ff ff ef 00   2d+03:10:29.690  READ DMA EXT
  25 00 01 ff ff ff ef 00   2d+03:10:29.679  READ DMA EXT
  25 00 01 ff ff ff ef 00   2d+03:10:29.678  READ DMA EXT
  25 00 00 ff ff ff ef 00   2d+03:10:29.667  READ DMA EXT

Error 15317 occurred at disk power-on lifetime: 51 hours (2 days + 3 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 53 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 00 ff ff ff ef 00   2d+03:07:56.308  READ DMA EXT
  25 00 00 ff ff ff ef 00   2d+03:07:56.253  READ DMA EXT
  25 00 01 ff ff ff ef 00   2d+03:07:56.240  READ DMA EXT
  25 00 01 ff ff ff ef 00   2d+03:07:56.240  READ DMA EXT
  c8 00 01 2f d2 da e9 00   2d+03:07:56.230  READ DMA

Error 15316 occurred at disk power-on lifetime: 51 hours (2 days + 3 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 53 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 00 ff ff ff ef 00   2d+03:07:43.707  READ DMA EXT
  25 00 00 ff ff ff ef 00   2d+03:07:43.638  READ DMA EXT
  25 00 00 ff ff ff ef 00   2d+03:07:40.843  READ DMA EXT
  25 00 00 ff ff ff ef 00   2d+03:07:40.769  READ DMA EXT
  25 00 01 ff ff ff ef 00   2d+03:07:40.753  READ DMA EXT

Error 15315 occurred at disk power-on lifetime: 51 hours (2 days + 3 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 53 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 00 ff ff ff ef 00   2d+03:07:17.806  READ DMA EXT
  25 00 00 ff ff ff ef 00   2d+03:07:17.747  READ DMA EXT
  25 00 01 ff ff ff ef 00   2d+03:07:17.730  READ DMA EXT
  25 00 01 ff ff ff ef 00   2d+03:07:17.729  READ DMA EXT
  c8 00 01 c5 1f 31 e3 00   2d+03:07:17.716  READ DMA

I have also downloaded and attached the full SMART report.

 

The big question, should this drive go into my unRAID array or be sent back to Amazon? I am thinking the latter currently!

unraid-smart-20170724-0856.zip

Edited by Keevil
Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.