December 19, 20178 yr On 12/17/2017 at 11:45 AM, Djoss said: This should not occur. Are you using an up-to-date browser? Yup, and still occurring (just tested). Using Chrome. Can try another later tonight.
December 19, 20178 yr Author 10 minutes ago, lordbob75 said: Yup, and still occurring (just tested). Using Chrome. Can try another later tonight. Can you provide the container logs again, after having reproduced the issue?
December 19, 20178 yr Just now, Djoss said: Can you provide the container logs again, after having reproduced the issue? Log for_ CrashPlanPRO.html
December 20, 20178 yr Author 5 hours ago, lordbob75 said: Log for_ CrashPlanPRO.html One other thing: Could you open Chrome's developer tools (shift+ctrl+i), make sure to select the "console" tab, and then load the container's UI by adding the argument '?logging=debug' to its URL. For example: http://192.168.1.5:7810/?logging=debug Then, provide the Chrome's console output. Thanks!
December 20, 20178 yr 17 minutes ago, Djoss said: Then, provide the Chrome's console output. Thanks! 192.168.1.3-1513737100435.log
December 20, 20178 yr Author 13 hours ago, lordbob75 said: 192.168.1.3-1513737100435.log What's the exact Chrome version ? On which OS?
December 21, 20178 yr 9 hours ago, Djoss said: What's the exact Chrome version ? On which OS? Windows 10, Version 63.0.3239.84 (Official Build) (64-bit) Does not work in chrome on my android either, although it connects, just doesn't load anything aside from the top menu bar.
December 21, 20178 yr I followed the steps to update and its working but now I have 2 backups, one without files but I cannot delete it as it says I need to have a default. I cant find where to change the default to the new one. Did I miss a step somewhere?
December 21, 20178 yr I followed the instructions at the start of the thread to copy my app data folder to the Pro. I also upgraded my CrashPlan account to Pro and confirmed I can log in via the webpage. I installed the Pro container but am unable to log in. I am inserting the correct password however I keep receiving the message "Unable to sign in". I have confirmed via the Code42 webpage my account is correct. Even if I change pwd I still receive the same message.
December 21, 20178 yr Author 11 hours ago, RAINMAN said: I followed the steps to update and its working but now I have 2 backups, one without files but I cannot delete it as it says I need to have a default. I cant find where to change the default to the new one. Did I miss a step somewhere? Not sure to understand your issue. Can you post a screenshot showing what you are talking about?
December 21, 20178 yr Author 5 hours ago, darrenyorston said: I followed the instructions at the start of the thread to copy my app data folder to the Pro. I also upgraded my CrashPlan account to Pro and confirmed I can log in via the webpage. I installed the Pro container but am unable to log in. I am inserting the correct password however I keep receiving the message "Unable to sign in". I have confirmed via the Code42 webpage my account is correct. Even if I change pwd I still receive the same message. You were using the home version using jlesage/crashplan container or another one?
December 21, 20178 yr Author 12 hours ago, lordbob75 said: Windows 10, Version 63.0.3239.84 (Official Build) (64-bit) Does not work in chrome on my android either, although it connects, just doesn't load anything aside from the top menu bar. That's strange, I'm using the exact same Chrome version I can't reproduce the issue. You said that after clearing the cache it works. What you need to do then to reproduce the problem?
December 21, 20178 yr 22 minutes ago, Djoss said: You were using the home version using jlesage/crashplan container or another one? I upgraded from gfjardim/crashplan The issue is that I have 2 backup sets. I cant delete the old one. When I try and delete it, I get this error. I'm not sure why I ended up with 2 sets. Maybe I screwed something up along the way...
December 21, 20178 yr Author 13 minutes ago, RAINMAN said: I upgraded from gfjardim/crashplan The issue is that I have 2 backup sets. I cant delete the old one. When I try and delete it, I get this error. I'm not sure why I ended up with 2 sets. Maybe I screwed something up along the way... Are you using the default container settings? What are your volume mappings?
December 21, 20178 yr Author 1 minute ago, RAINMAN said: Default mappings and settings except max memory is 5G. Since the paths under the old container were different, did you re-selected your files under /storage ? Check which files are selected in both backup sets...
December 21, 20178 yr Yes, I deselected the files in the old set and re-selected them in the new set.
December 21, 20178 yr Author 2 hours ago, RAINMAN said: Yes, I deselected the files in the old set and re-selected them in the new set. What you normally need to do is keep files from your old container selected (the ones under /mnt/user/) and select the same files under the new path (/storage). You then preform a backup. Once done, then you can remove the old selection.
December 21, 20178 yr 7 hours ago, Djoss said: You were using the home version using jlesage/crashplan container or another one? Yes. I am/was utilising jlesage/crashplan. It works fine.
December 21, 20178 yr 8 hours ago, Djoss said: That's strange, I'm using the exact same Chrome version I can't reproduce the issue. You said that after clearing the cache it works. What you need to do then to reproduce the problem? Will test again when I get home, but I had cleared the cache, it worked, then next time I opened it, it wasn't working. Clearing the cache again fixed it until the next time I opened it. Not sure if it was the next day or whatever though.
December 24, 20178 yr Hi I'm really confused here. I previously migrated from Crashplan home to previous Crashplan Pro app (gfjardim/crashplan:latest) went through migration to pro and all seemed to work ok using Pro version. Now appears I now need to use jlesage/crashplan-pro:latest docker instead. Obviously wanting to re-use my existing config, so I added a few folder / path (/mnt/user/appdata/CrashPlanPRO) and copied gfjardim appdata config content to that (see below). Docker starts ok, I'm able to log in with usual credentials, I choose my existing tower, but then I'm asked to choose files to transfer or skip. if I choose file transfer, appears I need to choose files on my crashplan online backup, but if I choose skip files I receive a scary message (see below) All i want to achieve is to sync my data on tower to my online crashplan, so my backups can restart. (obviously I don't want to resend the TB's of data already synced as that might take about a month) - Some guidance appreciated please as dont want to mess things up. Migrating to jlesage crashplanPro.pdf
December 24, 20178 yr Hi my Crashplan pro just keep showing waiting for connection . I have login and all I read som say it if it need more ram but I have follow this one and adde 4GB did not help https://support.code42.com/CrashPlan/5/Troubleshooting/Adjust_Code42_app_settings_for_memory_usage_with_large_backups other there have try the same ?
December 26, 20178 yr Author On 24/12/2017 at 3:05 AM, huntjules said: Hi I'm really confused here. I previously migrated from Crashplan home to previous Crashplan Pro app (gfjardim/crashplan:latest) went through migration to pro and all seemed to work ok using Pro version. Now appears I now need to use jlesage/crashplan-pro:latest docker instead. Obviously wanting to re-use my existing config, so I added a few folder / path (/mnt/user/appdata/CrashPlanPRO) and copied gfjardim appdata config content to that (see below). Docker starts ok, I'm able to log in with usual credentials, I choose my existing tower, but then I'm asked to choose files to transfer or skip. if I choose file transfer, appears I need to choose files on my crashplan online backup, but if I choose skip files I receive a scary message (see below) All i want to achieve is to sync my data on tower to my online crashplan, so my backups can restart. (obviously I don't want to resend the TB's of data already synced as that might take about a month) - Some guidance appreciated please as dont want to mess things up. Migrating to jlesage crashplanPro.pdf First, appdata from your old container is not fully compatible with this one. So the copy you did is useless. Normally, you would have start with an empty appdata. Then, you can skip the file transfer without issue. The wizard assumes that the current device doesn't have a local copy of the data in the cloud, which is obviously no the case. Since the file paths between the old and the new container is different (your files are under /storage in the new one), you will need to re-select your files under the correct path, then perform a backup (without removing files marked as missing, which are under the old /mnt/user path). Because of deduplication, nothing will be re-uploaded. All these instructions can be found at https://github.com/jlesage/docker-crashplan-pro#taking-over-existing-backup
December 26, 20178 yr Author On 24/12/2017 at 8:50 AM, tola5 said: Hi my Crashplan pro just keep showing waiting for connection . I have login and all I read som say it if it need more ram but I have follow this one and adde 4GB did not help https://support.code42.com/CrashPlan/5/Troubleshooting/Adjust_Code42_app_settings_for_memory_usage_with_large_backups other there have try the same ? It is waiting for which connection? To CrashPlan Central?
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.