August 29, 20178 yr I recently just installed a IBM LSI SAS9201 Controller Card. None of the drives attached to the card are being recognized. I read through the forums and read where this is supposed to be a Plug N Play card. Where would be the best place to start troubleshooting this? Thanks in advance for any assistance. epcot-diagnostics-20170829-1536.zip
August 29, 20178 yr Controller is being correctly detected, thought it's using an older firmware, but no disks are detected. Does it have a bios installed? And if so are the disks detected there? Most common cause of this is using the wrong cables, reverse breakout instead of the correct forward breakout, unfortunately they look the same.
August 29, 20178 yr Author 5 minutes ago, johnnie.black said: Most common cause of this is using the wrong cables, reverse breakout instead of the correct forward breakout, unfortunately they look the same. Viola! Thanks. Looks like I am common because I AM using the incorrect cables. Just went and ordered the correct forward breakout cables and will try this all again Thursday. Thanks again I appreciate the help.
August 31, 20178 yr Author Got the correct cables and the controller card is picking them all up. Thanks again. Now back to my other issue:
Archived
This topic is now archived and is closed to further replies.