I am running 6.3.5.  I have been primarily using plex on the unraid server and somewhere along the way I lost access to shares on the network.  I might have lost the shares with upgrading from 5 to 6.3, but it seems unlikely that I didn't check all was working then.  It has been a while, so I really don't trust my memory.  I apologize for the lack of info, but am hoping I can get some help moving forward.

 

I can't see the server (doesn't show up in network) with Windows 10, Mac or Android.

 

I have checked the Workgroup settings are consistent (PETEDOG).  I also installed the Master Browser plugin and checked that unraid is the master.  The server only has one nic, so no issues there.

 

I have tried the SMB parameters:

ntlm auth = yes
max protocol = SMB2_02

 

I have also tried registry entries:

\SYSTEM\CurrentControlSet\Services\Browser\Parameters\MaintainServerList=No

SYSTEM\CurrentControlSet\Services\LanmanWorkstation\Parameters\AllowInsecureGuestAuth=1

 

I tried booting in safe mode and have attached diagnostics.

 

Thanks in advance for any help you can provide.

 

Cheers,

Aaron

nas-safemode-diagnostics-20170903-1030.zip

nas-safemode-syslog-20170903-1031.zip

Can you hit the shares by navigating to the IP address?  (\\192.168.123.64)

Unfortunately, no.  Using the IP address doesn't work.

So, I tried watching traffic on 445, 137, and 139 to make sure samba is working.  When I restart samba (/etc/rc.d/rc.samba restart), I see it broadcasting.  See first image.  Sorry I can't figure out to export summary view in wireshark.  I am a noob.

 

My PC: 192.168.123.65  (electra)

Unraid: 192.168.123.64  (nas)

 

The workgroup is PETEDOG.

 

When I try to access unraid from windows file explorer by \\192.168.123.64, I appear to get a bunch of resets (RST?).  Can anyone help me decipher these?

 

Thanks,

Aaron

 

 

 

 

Edited September 4, 20178 yr by mtense

My shares are back after finding this post.

 

I was installing glibc-2.17-x86_64-7.txz so that I could build perl modules.  With installpkg for commented out glibc-2.17-x86_64-7.txz, shares are back!  I assume I need to upgrade.

11 hours ago, mtense said:

My shares are back after finding this post.

 

I was installing glibc-2.17-x86_64-7.txz so that I could build perl modules.  With installpkg for commented out glibc-2.17-x86_64-7.txz, shares are back!  I assume I need to upgrade.

You would be better off using the DevPack plugin to install things like this.    That way they are more likely to be kept up-to-date and compatible with the latest unRAID releases.

Great.  I figured someone had solved this problem already.  I will look into it.  Thanks!