September 5, 20178 yr Old harddrive that has served me quite well, was looking for a temp solution to add more storage to my array but not sure I should trust this disk. But it was from a time when Seagate were not going very well at all. smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.12.10-unRAID] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda Green (AF) Device Model: ST2000DL003-9VT166 Serial Number: 5YD5SGY8 LU WWN Device Id: 5 000c50 045bc8a82 Firmware Version: CC3C User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5900 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Sep 5 11:51:55 2017 BST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 121) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: ( 612) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 341) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x30b7) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 119 097 006 Pre-fail Always - 214520040 3 Spin_Up_Time 0x0003 093 092 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 093 093 020 Old_age Always - 7197 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 075 060 030 Pre-fail Always - 17304636831 9 Power_On_Hours 0x0032 049 012 000 Old_age Always - 45468 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1685 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 107 188 Command_Timeout 0x0032 100 098 000 Old_age Always - 4295032853 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 066 053 045 Old_age Always - 34 (0 10 39 25 0) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 820 193 Load_Cycle_Count 0x0032 097 097 000 Old_age Always - 7650 194 Temperature_Celsius 0x0022 034 047 000 Old_age Always - 34 (128 0 0 0 0) 195 Hardware_ECC_Recovered 0x001a 031 003 000 Old_age Always - 214520040 197 Current_Pending_Sector 0x0012 090 090 000 Old_age Always - 840 198 Offline_Uncorrectable 0x0010 090 090 000 Old_age Offline - 840 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 1 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 23476 (50 107 0) 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 3021899176 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 2271296532 SMART Error Log Version: 1 ATA Error Count: 105 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 105 occurred at disk power-on lifetime: 45460 hours (1894 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 c0 ff ff ff 4f 00 15:09:50.284 READ FPDMA QUEUED 60 00 40 ff ff ff 4f 00 15:09:50.284 READ FPDMA QUEUED 60 00 c0 ff ff ff 4f 00 15:09:50.283 READ FPDMA QUEUED 60 00 40 ff ff ff 4f 00 15:09:50.283 READ FPDMA QUEUED 27 00 00 00 00 00 e0 00 15:09:50.280 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] Error 104 occurred at disk power-on lifetime: 45460 hours (1894 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 c0 ff ff ff 4f 00 15:09:45.836 READ FPDMA QUEUED 60 00 40 ff ff ff 4f 00 15:09:45.836 READ FPDMA QUEUED 60 00 c0 ff ff ff 4f 00 15:09:45.836 READ FPDMA QUEUED 60 00 40 ff ff ff 4f 00 15:09:45.836 READ FPDMA QUEUED 60 00 40 ff ff ff 4f 00 15:09:45.797 READ FPDMA QUEUED Error 103 occurred at disk power-on lifetime: 45460 hours (1894 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 40 ff ff ff 4f 00 15:09:42.322 READ FPDMA QUEUED 60 00 c0 ff ff ff 4f 00 15:09:42.322 READ FPDMA QUEUED 27 00 00 00 00 00 e0 00 15:09:42.321 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 a0 00 15:09:42.320 IDENTIFY DEVICE ef 03 46 00 00 00 a0 00 15:09:42.320 SET FEATURES [Set transfer mode] Error 102 occurred at disk power-on lifetime: 45460 hours (1894 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 c0 ff ff ff 4f 00 15:09:38.887 READ FPDMA QUEUED 60 00 40 ff ff ff 4f 00 15:09:38.887 READ FPDMA QUEUED 60 00 c0 ff ff ff 4f 00 15:09:38.887 READ FPDMA QUEUED 27 00 00 00 00 00 e0 00 15:09:38.886 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 a0 00 15:09:38.886 IDENTIFY DEVICE Error 101 occurred at disk power-on lifetime: 45460 hours (1894 days + 4 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 c0 ff ff ff 4f 00 15:09:35.453 READ FPDMA QUEUED 60 00 40 ff ff ff 4f 00 15:09:35.453 READ FPDMA QUEUED 60 00 c0 ff ff ff 4f 00 15:09:35.453 READ FPDMA QUEUED 60 00 40 ff ff ff 4f 00 15:09:35.453 READ FPDMA QUEUED 60 00 01 ff ff ff 4f 00 15:09:35.452 READ FPDMA QUEUED SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed: read failure 90% 45468 2663940616 # 2 Short offline Completed: read failure 90% 45466 2663940616 # 3 Extended offline Completed: read failure 90% 45466 2663940616 # 4 Short offline Completed without error 00% 27635 - # 5 Extended offline Interrupted (host reset) 90% 27445 - # 6 Short offline Completed without error 00% 36045 - # 7 Short offline Completed without error 00% 36044 - # 8 Short offline Completed without error 00% 36043 - # 9 Short offline Completed without error 00% 36042 - #10 Short offline Completed without error 00% 36041 - #11 Short offline Completed without error 00% 36040 - #12 Short offline Completed without error 00% 36039 - #13 Short offline Completed without error 00% 36038 - #14 Short offline Completed without error 00% 36037 - #15 Short offline Completed without error 00% 36036 - #16 Short offline Completed without error 00% 36035 - #17 Short offline Completed without error 00% 36034 - #18 Short offline Completed without error 00% 36033 - #19 Short offline Completed without error 00% 36032 - #20 Short offline Completed without error 00% 36031 - #21 Short offline Completed without error 00% 36030 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
September 5, 20178 yr Yes. A lot of pending sectors, reported incorrect, older disk. I wouldn't put data I am worried about in this disk. Might be useful for backup some of your array data. Better than no backup.
September 5, 20178 yr Author 52 minutes ago, bjp999 said: Yes. A lot of pending sectors, reported incorrect, older disk. I wouldn't put data I am worried about in this disk. Might be useful for backup some of your array data. Better than no backup. Thanks, I was guessing as much but wanted to be told. I've had a bunch of Seagate disks from what must be 5-7 years ago, including the external's known for Click of death. They lasted longer than expected, even the clicking drives can still be read just happen to cause the whole system to hang if it starts clicking.
Archived
This topic is now archived and is closed to further replies.