September 18, 20178 yr I listed the 9305-16i in my new build post and someone has mentioned that it might not actually be supported in Unraid. Digging a bit more, all I can find is some troubling posts about the 9305-24i not being recognised, which I assume could mean that the 16i version is also not going to work? Has anyone used this 9305 controller successfully? My fallback is the 9207-8i, which I have seen mentioned a few times with success. Thanks, Charlie Edited September 18, 20178 yr by gambcl Corrected subject
September 18, 20178 yr 24 minutes ago, gambcl said: Digging a bit more, all I can find is some troubling posts about the 9305-24i not being recognised, which I assume could mean that the 16i version is also not going to work? It *may* wok with latest unRAID, but IIRC never seen a post of someone using one. 25 minutes ago, gambcl said: My fallback is the 9207-8i, which I have seen mentioned a few times with success. This one works for sure.
December 10, 20178 yr I can confirm that the LSI HBA 9305-16i works with unraid. All my ssd’s and hard disks are recognized. I just built a server using it along with a Supermicro X11SSZ-TLN4F-O motherboard.
June 2, 20197 yr On 12/10/2017 at 6:21 AM, Limy said: I can confirm that the LSI HBA 9305-16i works with unraid. All my ssd’s and hard disks are recognized. I just built a server using it along with a Supermicro X11SSZ-TLN4F-O motherboard. What about TRIM, does that work with that card?
June 3, 20197 yr 15 hours ago, linusgrip said: What about TRIM, does that work with that card? It will work with SSDs that support read zeros after trim.
November 25, 20196 yr 59 minutes ago, Vitalsignser said: Does it need to be flashed to IT mode? No, it's IT mode only.
Archived
This topic is now archived and is closed to further replies.