Passing through USB3/SATA controller - which method?

[snidera]

I want to add Bluray drives to my Win10 VM for ripping.  Tried a couple methods that didn't work, so I bought a PCI-E x1 card that has 4x USB3.0 & 2x SATA.  I want to pass through the whole controller.

 

Currently, I've tried the <hostdev> method from here Simpler / Easier PCI Device Pass Through for NON-GPUs

There were 5 devices & I was suspect about not seperating IOMMU groups, but I tried it anyway - now Unraid webgui is unresponsive (chrome shows 'waiting for 192....'

I can SSH in & SMB shares are still functioning.  Going to reboot using ssh.

I have a monitor hooked to it, it was at the login prompt before, now it has scrolled through some output ending with a 'stop trace....' statement.  I can't decipher any of it, but it was definitely related.

 

IOMMU groups /PCI info that I want to pass through (group 12/13/14 - these were new after installing the card & I believe are all that are new)

I already have a vfio-pci.ids entry in my go file(to get the audio to pass through with iGPU), how do I separate multiples?  I've never seen an example with multiple entries to know whether it's a space, comma, etc.

IOMMU group 0
	[8086:191f] 00:00.0 Host bridge: Intel Corporation Skylake Host Bridge/DRAM Registers (rev 07)
IOMMU group 1
	[8086:1912] 00:02.0 VGA compatible controller: Intel Corporation HD Graphics 530 (rev 06)
IOMMU group 2
	[8086:a12f] 00:14.0 USB controller: Intel Corporation Sunrise Point-H USB 3.0 xHCI Controller (rev 31)
	[8086:a131] 00:14.2 Signal processing controller: Intel Corporation Sunrise Point-H Thermal subsystem (rev 31)
IOMMU group 3
	[8086:a13a] 00:16.0 Communication controller: Intel Corporation Sunrise Point-H CSME HECI #1 (rev 31)
IOMMU group 4
	[8086:a102] 00:17.0 SATA controller: Intel Corporation Sunrise Point-H SATA controller [AHCI mode] (rev 31)
IOMMU group 5
	[8086:a169] 00:1b.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Root Port #19 (rev f1)
IOMMU group 6
	[8086:a16a] 00:1b.3 PCI bridge: Intel Corporation Sunrise Point-H PCI Root Port #20 (rev f1)
IOMMU group 7
	[8086:a112] 00:1c.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #3 (rev f1)
IOMMU group 8
	[8086:a114] 00:1c.4 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #5 (rev f1)
IOMMU group 9
	[8086:a118] 00:1d.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #9 (rev f1)
IOMMU group 10
	[8086:a144] 00:1f.0 ISA bridge: Intel Corporation Sunrise Point-H LPC Controller (rev 31)
	[8086:a121] 00:1f.2 Memory controller: Intel Corporation Sunrise Point-H PMC (rev 31)
	[8086:a170] 00:1f.3 Audio device: Intel Corporation Sunrise Point-H HD Audio (rev 31)
	[8086:a123] 00:1f.4 SMBus: Intel Corporation Sunrise Point-H SMBus (rev 31)
IOMMU group 11
	[8086:15b8] 00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (2) I219-V (rev 31)
IOMMU group 12
	[1b21:1182] 02:00.0 PCI bridge: ASMedia Technology Inc. Device 1182
IOMMU group 13
	[1b21:1182] 03:03.0 PCI bridge: ASMedia Technology Inc. Device 1182
	[1106:3483] 04:00.0 USB controller: VIA Technologies, Inc. VL805 USB 3.0 Host Controller (rev 01)
IOMMU group 14
	[1b21:1182] 03:07.0 PCI bridge: ASMedia Technology Inc. Device 1182
	[1b21:0612] 05:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 01)
IOMMU group 15
	[1000:0072] 07:00.0 Serial Attached SCSI controller: LSI Logic / Symbios Logic SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] (rev 03)

I added this to the (functioning) win10  xml.

    <hostdev mode='subsystem' type='pci' managed='yes'>
      <driver name='vfio'/>
      <source>
        <address domain='0x0000' bus='0x02' slot='0x00' function='0x0'/>
      </source>
    </hostdev>
	    <hostdev mode='subsystem' type='pci' managed='yes'>
      <driver name='vfio'/>
      <source>
        <address domain='0x0000' bus='0x03' slot='0x03' function='0x0'/>
      </source>
    </hostdev>
	    <hostdev mode='subsystem' type='pci' managed='yes'>
      <driver name='vfio'/>
      <source>
        <address domain='0x0000' bus='0x04' slot='0x00' function='0x0'/>
      </source>
    </hostdev>
	    <hostdev mode='subsystem' type='pci' managed='yes'>
      <driver name='vfio'/>
      <source>
        <address domain='0x0000' bus='0x03' slot='0x07' function='0x0'/>
      </source>
    </hostdev>
	    <hostdev mode='subsystem' type='pci' managed='yes'>
      <driver name='vfio'/>
      <source>
        <address domain='0x0000' bus='0x05' slot='0x00' function='0x0'/>
      </source>
    </hostdev>

 

Edited October 15, 2017 by snidera

[BobPhoenix]

Here is how I have my multiple stubs set in syslinux:

vfio-pci.ids=8086:1d6b,1131:7160,8086:10d3,1912:0014

Edited October 15, 2017 by BobPhoenix

[snidera]

OK, so it was fully hung up.  shutdown -h now via ssh failed, so I did what I should have done first thing - held the power button down.

 

Now it somewhat works - USB & SATA controller show up in the 'edit' page of the VM.  I was going to make a change to overwrite the xml...

 

SATA BR Drive shows up in windows, but I can't read data from the disk - the folder structure works, but I can't access files - do I need vertio drivers?  

 

ETA - thanks Bob, thought I'd try comma first, but hadn't killed power yet.

Edited October 15, 2017 by snidera

[snidera]

I have:

Stubbed out all 5 PCI addresses in syslinux

checked both the USB3 & SATA in the VM config page

 

BR drive shows up in win 10, Device manager recognizes proper DR Model, recognizes a disk (DVD & CD audio), I can see the files in explorer, but I cannot PLAY anything.   MakeMKV says it cannot find an optical disk it can use.   

 

Google says this controller doesn't play nice with Optical drives.  bought this & a USB/SATA adapter that both don't work.  geeesh.

Edited October 18, 2017 by snidera