ralieghnet Posted November 2, 2017 Share Posted November 2, 2017 Currently, I'm running 6.3.5 for the system. It will run for about 12-18hrs before it locks us. I've turned on Troubleshooting mode. Here are the last logs that was reported through FCPsyslog_tail.txt Nov 1 04:24:31 Tower root: Fix Common Problems: /var/log currently 2 % full Nov 1 04:24:31 Tower root: Fix Common Problems: rootfs (/) currently 4 % full Nov 1 04:34:31 Tower root: Fix Common Problems: Capturing diagnostics. When uploading diagnostics to the forum, also upload /logs/FCPsyslog_tail.txt on the flash drive Nov 1 04:34:33 Tower root: Fix Common Problems Version 2017.10.28 Nov 1 04:34:34 Tower root: Fix Common Problems: /var/log currently 2 % full Nov 1 04:34:34 Tower root: Fix Common Problems: rootfs (/) currently 4 % full I have turned off all VM's for now Docker containers running are apache cpu lock = 1 couchpotato letsencrypt cpu lock = 1 muximux mysql cpu lock = 1 nextcloud cpu lock = 1 nginx cpu lock = 1 plex cpu lock = 2-5 sabnzbd sonarr System Ryzen 1700x Asus Prime x370-pro 32GB Kingston Ram I have run the memtest for over 24 hrs with no errors Any suggestions on what I can do next. Quote Link to comment
JorgeB Posted November 2, 2017 Share Posted November 2, 2017 19 minutes ago, ralieghnet said: Any suggestions on what I can do next. Upgrade to v6.4, there's known issues with Ryzen on v6.3.x, though latest 6.4 is missing an important setting, see here: Quote Link to comment
ralieghnet Posted November 2, 2017 Author Share Posted November 2, 2017 Thanks, Ill give it a try Quote Link to comment
ralieghnet Posted November 3, 2017 Author Share Posted November 3, 2017 The system was up and running for at least 12hrs. I'm not sure when it froze again. The last log entry was from the mover around 330am. I tried to access the system through direct access and there was no response. The only thing I can think of is any time there is a load placed on the system from either the mover, streaming, or file transfer is causing the problem. I have moved all containers and vm away from the first cpu so unraid can operate without competition for the processor. Also, it was noticed that after upgrade to 6.4 newest release one of my 4TB drives showed full. I did the recommended fix of copying a large file and this fixed the problem. But, after the system freeze the drive now shows full again. Any other suggestions? Quote Link to comment
ralieghnet Posted November 3, 2017 Author Share Posted November 3, 2017 While actively monitoring the log I noticed these errors channel 10: open failed: connect failed: Connection refused channel 10: open failed: connect failed: Connection refused channel 7: open failed: connect failed: Connection refused Quote Link to comment
ralieghnet Posted November 22, 2017 Author Share Posted November 22, 2017 I've upgraded to the newest 6.4.13 and the system still locks up any other suggestions or logs that I can post to help get this working? Quote Link to comment
JorgeB Posted November 22, 2017 Share Posted November 22, 2017 Have you tried disabling C-states? Though I don't use Ryzen and IIRC some users can only run it stable with C-states disable, more info on this thread, on can just read the last couple of pages: https://forums.lime-technology.com/topic/55150-anybody-planning-a-ryzen-build/ Quote Link to comment
grither Posted November 22, 2017 Share Posted November 22, 2017 I had a similar problem months ago, when my mover was set to hourly. changed mover to weekly, and have been up for 4 months without a lockup. depends a bit on how big your cache drive is Quote Link to comment
ralieghnet Posted November 22, 2017 Author Share Posted November 22, 2017 (edited) I did at one point have the mover set to hourly when I was first building the system, but I have now set it back to the default schedule. I through this would help but it didn't. I do notice that when I'm playing a lot through Plex the system seems to lock up more often. I'll give the C-state a try tonight. Thanks for all the help. Edited November 22, 2017 by ralieghnet Quote Link to comment
ralieghnet Posted December 4, 2017 Author Share Posted December 4, 2017 It has been since the 22 of November when I changed the C-state setting. The system has not frozen once. Thanks for the help. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.