Parity sync error: please help with diagnostics


sakh1979

Recommended Posts

Hi -

 

Yesterday, after a power failure I got 14,000+ sync errors, then I ran second parity check (with parity correction this time). The second parity check did "correct" all but couple of errors.

 

Today, I ran the third parity check (hoping I would get 0 errors). However, I ended up with 286 errors, please see the attachment.

 

Could someone please take a look at my diagnostics and let me know what is causing all these errors?

 

Thanks,

Sagun

Screen Shot 2017-11-13 at 11.38.06 PM.png

tower-diagnostics-20171113-2331.zip

Screen Shot 2017-11-13 at 11.40.48 PM.png

Link to comment
19 hours ago, johnnie.black said:

Start by running memtest.

 

P.S.: SATA ports 5 and 6 are set to IDE, enter your bios and change them to AHCI/SATA.

 

OK, I ran memtest for 5 passes with 0 errors. Next, I will change ports 5 and 6 to SATA from IDE.

 

What is the next step from there?

 

Thanks,

Sagun

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.