DDock Posted September 1, 2020 Share Posted September 1, 2020 (edited) Any ideas why this is showing up for this docker? None of my other dockers show this: I have not made any changes but noticed this has changed to not available. I haven't checked things in about a week, so it would have happened between then and now. Edited September 1, 2020 by DDock Quote Link to comment
binhex Posted September 1, 2020 Author Share Posted September 1, 2020 1 minute ago, DDock said: Any ideas why this is showing up for this docker? None of my other dockers show this: that is either a unraid bug or docker hub was unavilable at the time the check happened, i can assure you it very much is 'available' :-), just run check for updates now and for me its reporting:- try running 'check for updates'. Quote Link to comment
DDock Posted September 1, 2020 Share Posted September 1, 2020 Yep! must have been a bug. Thanks. Had me a bit worried that you might have discontinued the project or something. Cheers and thanks for all the hard work! 1 Quote Link to comment
4554551n Posted September 2, 2020 Share Posted September 2, 2020 On 8/26/2020 at 10:52 PM, binhex said: yes 'additional_ports' its required to allow access to specific ports as the strict iptable rules will block by default, you may have an out of date template perhaps that doesnt have this setting, if so please add it as a config type of 'variable' to delugevpn, it should look something like the below:- I have added the following, and am still having no luck (I have also tried adding them one at a time, in case I didn't need both) Quote Link to comment
binhex Posted September 2, 2020 Author Share Posted September 2, 2020 3 hours ago, 4554551n said: I have added the following, and am still having no luck ok please go to unraid web ui, docker tab, toggle on 'advanced view' then screenshot the main screen showing all the containers, i am most interested in the port and networking settings for jackett and delugevpn. also can you post a screenshot showing the settings for delugevpn, preferably with advanced view toggled on. Quote Link to comment
4554551n Posted September 3, 2020 Share Posted September 3, 2020 On 9/2/2020 at 9:29 PM, binhex said: ok please go to unraid web ui, docker tab, toggle on 'advanced view' then screenshot the main screen showing all the containers, i am most interested in the port and networking settings for jackett and delugevpn. also can you post a screenshot showing the settings for delugevpn, preferably with advanced view toggled on. Is there any way I can DM you that information? Quote Link to comment
binhex Posted September 4, 2020 Author Share Posted September 4, 2020 On 9/3/2020 at 2:46 PM, 4554551n said: Is there any way I can DM you that information? sure Quote Link to comment
4554551n Posted September 7, 2020 Share Posted September 7, 2020 On 9/5/2020 at 1:13 AM, binhex said: sure Oh. It works now. I changed nothing. It's set to auto update, maybe you fixed something in the last couple of days? But now it works... The space invader video was missing the "additional_ports" variable. But now it works. Thank you! Quote Link to comment
dgwharrison Posted September 13, 2020 Share Posted September 13, 2020 Hi @binhex, thanks for another docker. I've only just installed this one. Doesn't seem to have loaded correctly when accessed via lets encrypt, not a massive problem just thought I'd report it. Quote Link to comment
J05u Posted October 19, 2020 Share Posted October 19, 2020 Hello @binhex, can you please update this docker? They got some issue with indexers, they fixed it in Jackett 0.16.1757 Quote Link to comment
binhex Posted October 19, 2020 Author Share Posted October 19, 2020 5 hours ago, J05u said: Hello @binhex, can you please update this docker? They got some issue with indexers, they fixed it in Jackett 0.16.1757 done, check for an updated image in an hour from this post. 1 Quote Link to comment
J05u Posted October 19, 2020 Share Posted October 19, 2020 3 hours ago, binhex said: done, check for an updated image in an hour from this post. Thanks a lot! It's back on track Quote Link to comment
galego100 Posted October 23, 2020 Share Posted October 23, 2020 Hello, everytime i reboot the unraid , all the indexers disappear. Maybe i´m doing something wrong on the instalation? Quote Link to comment
Byrd Posted November 2, 2020 Share Posted November 2, 2020 (edited) If anyone is having issues with IPT, the website layout was updated and cookies are broken. The official Jackett container has fixed this in the newest version. Edited November 2, 2020 by Byrd Quote Link to comment
Iceman1199 Posted November 2, 2020 Share Posted November 2, 2020 57 minutes ago, Byrd said: If anyone is having issues with IPT, the website layout was updated and cookies are broken. The official Jackett container has fixed this in the newest version. I'm having this issue due the IPT's update. I see where you can manually add the cookies with the supplied directions, but I'm still getting an error about " An error occurred while updating this indexer Your cookie did not work: Found 0 results in the tracker" Has anyone been able to get passed this part? Quote Link to comment
theshabobo Posted November 2, 2020 Share Posted November 2, 2020 (edited) I am having the exact same issue. @binhex can you please update the container to the newest version so all of us having issues can get it resolved. Thank you! EDIT: Update ran. to version .1999 This fixes the issue. NOTE: you may have to remove and re-add the IPT entry in Jackett Edited November 2, 2020 by theshabobo Quote Link to comment
Iceman1199 Posted November 2, 2020 Share Posted November 2, 2020 1 hour ago, theshabobo said: I am having the exact same issue. @binhex can you please update the container to the newest version so all of us having issues can get it resolved. Thank you! EDIT: Update ran. to version .1999 This fixes the issue. NOTE: you may have to remove and re-add the IPT entry in Jackett Yup...just did a force update and configured IPT with cookies and had no issues. Quote Link to comment
Moose_Flunky Posted November 3, 2020 Share Posted November 3, 2020 Good morning. I'm having trouble with the latest version of Jackett connecting to both RADARR and SONARR. I had to revert back to arch-0.16.1937-1-01 to get them to talk to each other. I very cleverly fixed the problem without writing down the error, but it said something (truncated) "please check the capabilities (t=caps) and make sure the search mode and categories are supported.". I could search and download from inside of Jackett, but Jackett and RADARR/SONARR just wouldn't talk to each other. Quote Link to comment
nekromantik Posted November 9, 2020 Share Posted November 9, 2020 (edited) delete Edited November 9, 2020 by nekromantik Quote Link to comment
JustinChase Posted November 26, 2020 Share Posted November 26, 2020 I've been struggling to get Jackett working with Sonarr. I finally found the final bit that got me working (api location). Here are the settings that worked for me when adding Torznab to Sonarr. Notice the api location I had to change to get it working (FINALLY!!!) I hope it helps others searching for a solution that works. FYI, I didn't set up any proxy in Jackett Quote Link to comment
xxbigfootxx Posted November 27, 2020 Share Posted November 27, 2020 I'm having a lot of issues with indexers just failing for some reason. Today all of them failed and i can't get them back up. I removed them all and added these three again to test, same thing. Logs below: 2020-11-27 17:31:50,777 DEBG 'jackett' stdout output: at System.Net.Http.DecompressionHandler.SendAsync(HttpRequestMessage request, CancellationToken cancellationToken) at System.Net.Http.DiagnosticsHandler.SendAsync(HttpRequestMessage request, CancellationToken cancellationToken) at CloudflareSolverRe.ClearanceHandler.SendRequestAsync(HttpRequestMessage request, CancellationToken cancellationToken) at CloudflareSolverRe.ClearanceHandler.SendAsync(HttpRequestMessage request, CancellationToken cancellationToken) at System.Net.Http.HttpClient.FinishSendAsyncBuffered(Task`1 sendTask, HttpRequestMessage request, CancellationTokenSource cts, Boolean disposeCts) at Jackett.Common.Utils.Clients.HttpWebClient2.Run(WebRequest webRequest) in /tmp/makepkg/jackett/src/Jackett-0.16.2220/src/Jackett.Common/Utils/Clients/HttpWebClient2.cs:line 165 at Jackett.Common.Utils.Clients.WebClient.GetResultAsync(WebRequest request) in /tmp/makepkg/jackett/src/Jackett-0.16.2220/src/Jackett.Common/Utils/Clients/WebClient.cs:line 174 at Jackett.Common.Indexers.BaseWebIndexer.RequestWithCookiesAsync(String url, String cookieOverride, RequestType method, String referer, IEnumerable`1 data, Dictionary`2 headers, String rawbody, Nullable`1 emulateBrowser) in /tmp/makepkg/jackett/src/Jackett-0.16.2220/src/Jackett.Common/Indexers/BaseIndexer.cs:line 495 at Jackett.Common.Indexers.CardigannIndexer.PerformQuery(TorznabQuery query) in /tmp/makepkg/jackett/src/Jackett-0.16.2220/src/Jackett.Common/Indexers/CardigannIndexer.cs:line 1276 at Jackett.Common.Indexers.BaseIndexer.ResultsForQuery(TorznabQuery query, Boolean isMetaIndexer) in /tmp/makepkg/jackett/src/Jackett-0.16.2220/src/Jackett.Common/Indexers/BaseIndexer.cs:line 385 --- End of inner exception stack trace --- at Jackett.Common.Indexers.BaseIndexer.ResultsForQuery(TorznabQuery query, Boolean isMetaIndexer) in /tmp/makepkg/jackett/src/Jackett-0.16.2220/src/Jackett.Common/Indexers/BaseIndexer.cs:line 392 at Jackett.Common.Indexers.BaseWebIndexer.ResultsForQuery(TorznabQuery query, Boolean isMetaIndexer) in /tmp/makepkg/jackett/src/Jackett-0.16.2220/src/Jackett.Common/Indexers/BaseIndexer.cs:line 659 at Jackett.Common.Services.IndexerManagerService.TestIndexer(String name) in /tmp/makepkg/jackett/src/Jackett-0.16.2220/src/Jackett.Common/Services/IndexerManagerService.cs:line 278 at Jackett.Server.Controllers.IndexerApiController.Test() in /tmp/makepkg/jackett/src/Jackett-0.16.2220/src/Jackett.Server/Controllers/IndexerApiController.cs:line 129 at Microsoft.AspNetCore.Mvc.Infrastructure.ActionMethodExecutor.TaskOfIActionResultExecutor.Execute(IActionResultTypeMapper mapper, ObjectMethodExecutor executor, Object controller, Object[] arguments) at Microsoft.AspNetCore.Mvc.Infrastructure.ControllerActionInvoker.<InvokeActionMethodAsync>g__Awaited|12_0(ControllerActionInvoker invoker, ValueTask`1 actionResultValueTask) at Microsoft.AspNetCore.Mvc.Infrastructure.ControllerActionInvoker.<InvokeNextActionFilterAsync>g__Awaited|10_0(ControllerActionInvoker invoker, Task lastTask, State next, Scope scope, Object state, Boolean isCompleted) at Microsoft.AspNetCore.Mvc.Infrastructure.ControllerActionInvoker.Rethrow(ActionExecutedContextSealed context) at Microsoft.AspNetCore.Mvc.Infrastructure.ControllerActionInvoker.Next(State& next, Scope& scope, Object& state, Boolean& isCompleted) at Microsoft.AspNetCore.Mvc.Infrastructure.ControllerActionInvoker.<InvokeInnerFilterAsync>g__Awaited|13_0(ControllerActionInvoker invoker, Task lastTask, State next, Scope scope, Object state, Boolean isCompleted) at Microsoft.AspNetCore.Mvc.Infrastructure.ResourceInvoker.<InvokeFilterPipelineAsync>g__Awaited|19_0(ResourceInvoker invoker, Task lastTask, State next, Scope scope, Object state, Boolean isCompleted) at Microsoft.AspNetCore.Mvc.Infrastructure.ResourceInvoker.<InvokeAsync>g__Awaited|17_0(ResourceInvoker invoker, Task task, IDisposable scope) at Microsoft.AspNetCore.Routing.EndpointMiddleware.<Invoke>g__AwaitRequestTask|6_0(Endpoint endpoint, Task requestTask, ILogger logger) at Microsoft.AspNetCore.Authentication.AuthenticationMiddleware.Invoke(HttpContext context) at Jackett.Server.Middleware.CustomExceptionHandler.Invoke(HttpContext httpContext) in /tmp/makepkg/jackett/src/Jackett-0.16.2220/src/Jackett.Server/Middleware/CustomExceptionHandler.cs:line 26 Quote Link to comment
musicking Posted December 3, 2020 Share Posted December 3, 2020 Is it normal for this Docker Container to be 3GB? It doesn't look like it's a log issue. Quote Link to comment
binhex Posted December 3, 2020 Author Share Posted December 3, 2020 5 hours ago, musicking said: Is it normal for this Docker Container to be 3GB? It doesn't look like it's a log issue. nope its not normal but i havent had time to track down whats causing the increase in size, after some further investigation i found out its due to nuget caching, the next image will be smaller. 1 Quote Link to comment
xxDeadbolt Posted December 10, 2020 Share Posted December 10, 2020 Has the magdl.com indexer disappeared for anyone else? Had this set up but seems to have gone after a recent update, I think. Trying to track back to find out exactly when but no joy so far Quote Link to comment
thymon Posted December 16, 2020 Share Posted December 16, 2020 Some news about Jackett 0.17.50 ? Need to use Flaresolverr with Jackett Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.