spl147 Posted May 13, 2010 Share Posted May 13, 2010 i have a supermicro x7spa-hf mobo.....3ware 9650se-8lpml controller card...chenbro 23212 chassis...4 drives on the controller have no details(name,serial,temp) all missing....the drive on the mobo sata is populating all details.....am i missing something? Link to comment
Rajahal Posted May 13, 2010 Share Posted May 13, 2010 The controller card needs to be set to use 'JBOD' and not any other RAID levels. Link to comment
spl147 Posted May 14, 2010 Author Share Posted May 14, 2010 jbod is not a option....0,5,10 are my only options........ Link to comment
BRiT Posted May 14, 2010 Share Posted May 14, 2010 Then that card will not work for unRAID. You might be able to flash it down to a general-purpose SATA controller card to get it to work. Link to comment
spl147 Posted May 15, 2010 Author Share Posted May 15, 2010 The 9650SE supports RAID levels 0, 1, 5, 6, 10, 50, Single Disk, and JBOD. directly from 3wares site Link to comment
spl147 Posted May 15, 2010 Author Share Posted May 15, 2010 would it matter if there is data on the disks? Link to comment
Joe L. Posted May 15, 2010 Share Posted May 15, 2010 would it matter if there is data on the disks? no Link to comment
spl147 Posted May 15, 2010 Author Share Posted May 15, 2010 a brand new disk is automaticly set to jbod in the 3ware bios......... but in unraid it still doesnt show the SMART data..........if i put a disk that has the unraid file system on it on the 3ware controller it shows up as a single disk and i cannot change it...... Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.