Hi all,

 

Moved my build to an X399 system. Drives connected to the board show up fine, drives connected to the 9211-8i (P19 IT) aren't being detected in the WebUI.

 

Card was previously working fine. Tried different slots, same thing.

 

Anyone care to have a look through diags to see if any light can be shed on this?

 

 

server-diagnostics-20171118-1402.zip

Basically the controller is not responding:

 

Nov 18 13:59:52 server kernel: mpt3sas 0000:42:00.0: Refused to change power state, currently in D3
Nov 18 13:59:52 server kernel: mpt2sas_cm0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (32813424 kB)
Nov 18 13:59:52 server kernel: mpt2sas_cm0: sending diag reset !!
Nov 18 13:59:52 server kernel: mpt2sas_cm0: diag reset: FAILED
Nov 18 13:59:52 server kernel: mpt2sas_cm0: failure at drivers/scsi/mpt3sas/mpt3sas_scsih.c:8937/_scsih_probe()!

 

Different slot and/or a board bios update it's probably your best chance, some bios settings may also make a difference.

Thanks a million for looking through the logs!

 

That's irritating. 

I'll give it a go in another machine to see what happens. 

Though I think it might be a board issue. Tried a flashed H310 as well, and had similar issues.

 

I don't suppose you've any idea what settings I should be changing? Not familiar with more technical settings on AMD boards.

8 minutes ago, -Daedalus said:

I don't suppose you've any idea what settings I should be changing? Not familiar with more technical settings on AMD boards.

 

Not really, but you can try with anything related to PCIe settings.

Interestingly, all drives are detected on 6.3.5.

@limetech Any ideas if anything changed in unRAID or the Linux kernel that might explain this?

I can't imagine support for whatever isn't working in this card was dropped. Perhaps something in supporting Ryzen simply exposed this?

 

 

server-diagnostics-20171118-1501.zip

Edited November 18, 20178 yr by -Daedalus