Hi,

 

For the past 2 mornings my server gui and most dockers have crashed and the last entry in the syslog are that the mover has finished.   There are no errors but I cannot access the GUI although I can log onto SSH and navigate all the shares via SMB.  Also the SSH console responds it will not respond to the powerdown function, it will respond to the command by telling me the system is going down but nothing actually happens and I have had to hit the power button both times.  I use the unraid and all the dockers heavily most days without a glitch but overnight when the mover finishes something is happening? can anyone offer some advice please on where to go from here?

 

Many Thanks

Since you can SSH in, I would suggest the type the command diagnostic at the command prompt.  This will write the diagnostics file to the logs folder/directory on your flash Drive.  Upload that file.

How much Ram are you running on your system and what are your typical file sizes you are moving?

Just to update, I never got the chance to run the diagnostic command at the command promt but thank you @Frank1940 for the infor!

 

@kizer I am running 24GB and there is no typical file sizes being moved, it can be anything from 1 byte to 80GB in single file size.

 

I changed my cache to SSD on Friday and the problem has not returned.  I precleared the original cache drive and have re-used it in the array with no problems so I guess I will never know what the issue was but at least it is resolved! 

 

Thank you for your input :-)