December 4, 20178 yr Hi all I am quite a noob regarding UNRAID and I am unable to 'read' SMART reports. I got a 'Device Disabled, Contents Emulated' on Disk2, I am attaching the SMART extended self-test. Is my disk broken? What should I do next? Thanks in advance! smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.9.30-unRAID] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.14 (AF) Device Model: ST3000DM001-1CH166 Serial Number: Z1F2RZY8 LU WWN Device Id: 5 000c50 050460fa3 Firmware Version: CC24 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Mon Dec 4 01:09:46 2017 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 121) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: ( 575) seconds. Offline data collection capabilities: (0x73) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 338) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x3085) SCT Status supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 101 076 006 Pre-fail Always - 30903258 3 Spin_Up_Time 0x0003 094 093 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 096 096 020 Old_age Always - 4583 5 Reallocated_Sector_Ct 0x0033 093 093 010 Pre-fail Always - 9544 7 Seek_Error_Rate 0x000f 057 057 030 Pre-fail Always - 1353058538100 9 Power_On_Hours 0x0032 086 086 000 Old_age Always - 12396 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1658 183 Runtime_Bad_Block 0x0032 098 098 000 Old_age Always - 2 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 9610 188 Command_Timeout 0x0032 099 099 000 Old_age Always - 2 2 3 189 High_Fly_Writes 0x003a 088 088 000 Old_age Always - 12 190 Airflow_Temperature_Cel 0x0022 065 044 045 Old_age Always In_the_past 35 (0 137 39 33 0) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 274 193 Load_Cycle_Count 0x0032 080 080 000 Old_age Always - 40322 194 Temperature_Celsius 0x0022 035 056 000 Old_age Always - 35 (128 0 0 0 0) 197 Current_Pending_Sector 0x0012 096 096 000 Old_age Always - 728 198 Offline_Uncorrectable 0x0010 096 096 000 Old_age Offline - 728 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 7604h+09m+49.689s 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 49881648011 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 52872708069 SMART Error Log Version: 1 ATA Error Count: 9610 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 9610 occurred at disk power-on lifetime: 12300 hours (512 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 80 ff ff ff ef 00 1d+04:50:08.036 READ DMA EXT ef 10 02 00 00 00 a0 00 1d+04:50:08.035 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 e0 00 1d+04:50:08.035 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] ec 00 00 00 00 00 a0 00 1d+04:50:08.035 IDENTIFY DEVICE ef 03 46 00 00 00 a0 00 1d+04:50:08.035 SET FEATURES [Set transfer mode] Error 9609 occurred at disk power-on lifetime: 12300 hours (512 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 40 ff ff ff ef 00 1d+04:50:04.392 READ DMA EXT 25 00 a0 ff ff ff ef 00 1d+04:50:04.391 READ DMA EXT 25 00 40 ff ff ff ef 00 1d+04:50:04.380 READ DMA EXT 25 00 88 ff ff ff ef 00 1d+04:50:04.369 READ DMA EXT 25 00 08 ff ff ff ef 00 1d+04:50:04.362 READ DMA EXT Error 9608 occurred at disk power-on lifetime: 12271 hours (511 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 40 ff ff ff ef 00 03:54:15.294 READ DMA EXT 25 00 08 ff ff ff ef 00 03:54:15.286 READ DMA EXT 35 00 b8 ff ff ff ef 00 03:54:15.282 WRITE DMA EXT 35 00 40 ff ff ff ef 00 03:54:15.279 WRITE DMA EXT 35 00 40 ff ff ff ef 00 03:54:15.276 WRITE DMA EXT Error 9607 occurred at disk power-on lifetime: 12271 hours (511 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 40 ff ff ff ef 00 03:54:10.894 READ DMA EXT 25 00 40 ff ff ff ef 00 03:54:10.888 READ DMA EXT 25 00 40 ff ff ff ef 00 03:54:10.878 READ DMA EXT 25 00 40 ff ff ff ef 00 03:54:10.875 READ DMA EXT 25 00 90 ff ff ff ef 00 03:54:10.874 READ DMA EXT Error 9606 occurred at disk power-on lifetime: 11931 hours (497 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 ff ff ff ef 00 3d+01:07:34.628 READ DMA EXT 25 00 40 ff ff ff ef 00 3d+01:07:34.624 READ DMA EXT 25 00 20 ff ff ff ef 00 3d+01:07:34.616 READ DMA EXT 25 00 18 ff ff ff ef 00 3d+01:07:34.611 READ DMA EXT 25 00 a8 ff ff ff ef 00 3d+01:07:34.610 READ DMA EXT SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed: read failure 90% 12396 2909679264 # 2 Extended offline Completed: read failure 90% 12395 2910404536 # 3 Short offline Completed without error 00% 12394 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. Edited December 4, 20178 yr by nickbelane
December 4, 20178 yr That is a sick puppy. Lots of reallocated sectors after the disk have seen issues. Lots of uncorrect sectors. 728 sectors currently broken but can't be reallocated because the disk can't read up the content correctly and copy to a new sector. Read out what you can from the drive but get a replacement drive pronto. 5 Reallocated_Sector_Ct 0x0033 093 093 010 Pre-fail Always - 9544 187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 9610 197 Current_Pending_Sector 0x0012 096 096 000 Old_age Always - 728 198 Offline_Uncorrectable 0x0010 096 096 000 Old_age Offline - 728
Archived
This topic is now archived and is closed to further replies.