raidserver Posted December 7, 2017 Share Posted December 7, 2017 Hey guys I have put a brand new 8TB in the server for parity this morning. I had re-purposed the old parity as a data drive two days before, so i was running unprotected for that time. I couldn't seem to pre-clear the drive as the pre-clear menu couldn't show the drive information ie: firmware date,model number and such. As i needed to leave the server i stopped the array selected the 8TB for parity and started the sync. Returning to the server 8 hours later all seemed fine, the GUI states the sync will take around 22hours to complete(total). While using the server and checking logs some sort of hard reset has occurred recently? Being a new drive should i be concerned? The parity sync is still underway. If someone has the time to look at my system log i would appreciate that thanks tower-syslog-20171207-1601.zip Link to comment
JorgeB Posted December 7, 2017 Share Posted December 7, 2017 ata12 is your SSD, most likely a bad cable. Link to comment
raidserver Posted December 7, 2017 Author Share Posted December 7, 2017 Many thanks, its continuing to fault. Everything "looks" OK i will double check everything when powered down. Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.