December 27, 20178 yr ich würde gern 2 Festplatten tauschen weil die mir zu viele Fehler haben . I would like to swap 2 disks because they have too many mistakes. 1,) smart werte 197 Current pending sector 0x0032 200 195 000 Old age Always Never 149 198 Offline uncorrectable 0x0030 200 196 000 Old age Offline Never 88 Disk disk6 has an HPA partition enabled on it 2.) Smart werte : Disk disk7 has an HPA partition enabled on it 5 Reallocated sector count 0x0033 100 100 036 Pre-fail Always Never 13 187 Reported uncorrect 0x0032 001 001 000 Old age Always Never 2861 Wie kann ich die aus dem Array entfernen und wieder neue hinzufügen?! How can I remove them from the array and add new ones?
December 27, 20178 yr Are you running 2 parity disks? I suggest you download the diagnostics.zip file from the server and attach it here.
December 27, 20178 yr Author Diagnostic added . I don*t have parity. Only 3 cache Drives. 1 x 500SSD 2 x 300GB SAS 15k tower-diagnostics-20171227-1832.zip
December 27, 20178 yr If you have one single parity, then you can only recover from one broken disk. With two drives with issues, it can still be possible to recover since the two drives probably don't have broken sectors at the same place. But if you haven't any backup, I would suggest that you try to backup from these two drives to some other drives - preferably not disks that are part of your array. Edit: No parity means your system can't figure out what contents there should have been on the unreadable sectors. Edited December 27, 20178 yr by pwm
December 27, 20178 yr Author I dont have any data on this Disk. After install i see this. but I do not know how I can remove these hdd again from the array. when i build and reboot it always stands missing disk / failed How will I get them out of this? Sorry 4 my Bad english
December 27, 20178 yr Author and what do I have to do then? stop array? new config and then reboot? hard drives out? and then ? sorry unraid newbie * shame
December 27, 20178 yr Community Expert Stop array -> Tools -> New config Then just re-assgin the drives as you want.
December 27, 20178 yr Author great thank you. I will test it. does the data remain on the other disks?
Archived
This topic is now archived and is closed to further replies.