December 28, 20178 yr I am trying to figure out how to replace this and keep as much data as possible. IT shows unmountable when i start unraid normally. It started with 11 pending sectors and is at 199 now. To start, i do not know what the exact command is to tell it to examine the drive which is cache and does not have a number as per instructions here - https://wiki.lime-technology.com/Check_Disk_Filesystems#Drives_formatted_with_XFS The drive is labeled sdn according to unraid gui. (But the wiki above says to call it dev sdX1 if its cache and that is the hangup i have in the command question above) Also i have purchased sysdev labs recovery explorer standard from my last data emergency, so i could take the drive out and put in another machine to copy data off etc. Obviously i will be putting a new cache drive in to replace this, just one hopefully that has the data on it. Thanks in advance for any assistance. tower-smart-20171227-1700.zip Edit - additional question--- I assume i can pull the drive and run the array without it, seems like it might be a good idea since the pending sector count is increasing? UPDATE. so i'm copying data with recovery on my windows machine from a usb3 hub, so far so good, 5 files bad which are all plex files. posters, thumbs and a blobs.db2017-12-20. once i get all this data moved over on windows machine i assume i can copy it back to a new cache drive, but anticipate some possible permissions issues etc, Any comments as if to i am doing this properly. Not a whole lot of data other than the docker stuff and docker image. Maybe 15 gigs or so of stuff that hadn't been transferred over yet from the mover for today. I had plex, sonnar, sabnzbd, deluge and a few other apps installed with docker image. UPDATE 2, still cruising along, no replies. Did i ask the question wrong or miss an obvious search? I will have all the files copied over to a windows drive on the network in about 30 mins (its copying the docker.img file now which is last) There were only 6 files that failed to process, so i think i got this right so far on my own. UPDATE 3 , these are the files that it could not read - Does it matter that docker.img was unreadable? ie will a new docker.img just work? that is what i remember reading in the forums regarding this. Would xfs_repair have worked better? I just didn't know what the cache drive should be labeled so i could not do the command. I am going to ask for help in the unraid support chat as i haven't received any replies here. Forgot to mention this is where i am at now - https://wiki.lime-technology.com/Replace_A_Cache_Drive not quite sure how to proceed. - Errors log follows: Failed to process G:/r/appdata/PlexMediaServer/Library/Application Support/Plex Media Server/Plug-in Support/Databases/com.plexapp.plugins.library.blobs.db-2017-12-20: Unable to read source file Failed to process G:/r/appdata/PlexMediaServer/Library/Application Support/Plex Media Server/Metadata/TV Shows/5/0b78f1a68e935a00d5e538f0fa2e0382df78241.bundle/Contents/com.plexapp.agents.thetvdb/seasons/3/episodes/16/thumbs/9ecf0ec0a7b67db611389fba3a592fc8fe3bfaf7: Unable to read source file Failed to process G:/r/appdata/PlexMediaServer/Library/Application Support/Plex Media Server/Metadata/TV Shows/5/0b78f1a68e935a00d5e538f0fa2e0382df78241.bundle/Contents/com.plexapp.agents.thetvdb/seasons/3/episodes/18/thumbs/7f746e5ee1c27d40c60fec225d723d0f67fae0fc: Unable to read source file Failed to process G:/r/appdata/PlexMediaServer/Library/Application Support/Plex Media Server/Metadata/TV Shows/4/90c5a96c396b21093731e398db1ff4b33ea6c04.bundle/Contents/com.plexapp.agents.thetvdb/seasons/1/posters/2149485edbd45cca8b955edd294492f09c983740: Unable to read source file Failed to process G:/r/appdata/PlexMediaServer/Library/Application Support/Plex Media Server/Metadata/TV Shows/4/90c5a96c396b21093731e398db1ff4b33ea6c04.bundle/Contents/com.plexapp.agents.thetvdb/seasons/1/posters/341496229dd4d37aca2ec6ea25757e1e7de555e5: Unable to read source file Failed to process G:/r/appdata/PlexMediaServer/Library/Application Support/Plex Media Server/Metadata/TV Shows/9/04c9d171e9119ffa44b1193d72005e328fd0722.bundle/Contents/com.plexapp.agents.thetvdb/seasons/1/episodes/3/thumbs/1f2f5fc0f38468b369d3fb552475252a4fdf6723: Unable to read source file Failed to process G:/r/docker1.img: Unable to read source file Edited December 28, 20178 yr by FrozenGamer Updates
Archived
This topic is now archived and is closed to further replies.