[Deprecated] Linuxserver.io - airsonic


Recommended Posts

14 hours ago, tjb_altf4 said:

The template still needs an update, I installed Airsonic for the first time and ran into the 'too small initial heap' error.

Updating the JAVA_OPTS values with m after numbers as noted earlier resolved the issue.

 

I thought we fixed that a long time ago... Apparently we didn't. 

  • Upvote 1
Link to comment
  • 1 month later...

I'm not having luck streaming music with the Airsonic DLNA media server.  The media server does not appear to any devices (receiver, tv, etc).  I have the PLEX media server docker installed and my devices can see that. 

 

I have restarted the Arisonic server each time after saving the DLNA setting.  Any suggestions?  Thanks!

 

Enable DLNA server: Box checked

Use this option to turn on the DLNA/UPnP media server in Airsonic, and stream your media to compatible DLNA players. Requires restart.

 

Media Server name: Airsonic

Name of the media server, as shown on DLNA players.

 

LAN Server address: Slightly confused about this setting.  I'm not sure exactly what I need to put here.  I have tried http://UNRAID-IP/, http://UNRAID-IP/airsonic/, http://UNRAID-IP:4040/, http://UNRAID-IP:4040/airsonic/

The base LAN address to be used for DLNA resources, for example http://192.168.0.2/airsonic/

 

Log shows the server is enabled or at least started to enable.

2018-11-24 10:37:49.047 INFO --- o.a.player.service.UPnPService : Enabling UPnP/DLNA media server 

 

Version10.1.1-RELEASE – December 16, 2017

Serverjetty/9.3.14.v20161028, java 1.8.0_151, Linux (120.3 MB / 442.0 MB)

Link to comment
27 minutes ago, dboonthego said:

I'm not having luck streaming music with the Airsonic DLNA media server.  The media server does not appear to any devices (receiver, tv, etc).  I have the PLEX media server docker installed and my devices can see that. 

 

I have restarted the Arisonic server each time after saving the DLNA setting.  Any suggestions?  Thanks!

 

Enable DLNA server: Box checked

Use this option to turn on the DLNA/UPnP media server in Airsonic, and stream your media to compatible DLNA players. Requires restart.

 

Media Server name: Airsonic

Name of the media server, as shown on DLNA players.

 

LAN Server address: Slightly confused about this setting.  I'm not sure exactly what I need to put here.  I have tried http://UNRAID-IP/, http://UNRAID-IP/airsonic/, http://UNRAID-IP:4040/, http://UNRAID-IP:4040/airsonic/

The base LAN address to be used for DLNA resources, for example http://192.168.0.2/airsonic/

 

Log shows the server is enabled or at least started to enable.

2018-11-24 10:37:49.047 INFO --- o.a.player.service.UPnPService : Enabling UPnP/DLNA media server 

 

Version10.1.1-RELEASE – December 16, 2017

Serverjetty/9.3.14.v20161028, java 1.8.0_151, Linux (120.3 MB / 442.0 MB)

You need to map port 1900, but not sure if it works as plex already use it. 

Another solution is to give the airsonic its own IP. 

Edited by saarg
  • Like 1
Link to comment
On 11/24/2018 at 11:32 AM, saarg said:

You need to map port 1900, but not sure if it works as plex already use it. 

Another solution is to give the airsonic its own IP. 

Thanks.  I turned off PLEX and added added the following port config to the docker container.  I also tried setting Network Type=Host; Privileged=On.  Still no luck. 

  • Config Type: Port
  • Name: DLNA Port
  • Container Port: 1900
  • Host Port: 1900
  • Connection Type: UDP
  • Description: DLNA Port

 

Still confused about the proper usage of "LAN Server address" in the Airsonic web console.  Any other suggestions?

 

Link to comment
6 hours ago, dboonthego said:

Thanks.  I turned off PLEX and added added the following port config to the docker container.  I also tried setting Network Type=Host; Privileged=On.  Still no luck. 

  • Config Type: Port
  • Name: DLNA Port
  • Container Port: 1900
  • Host Port: 1900
  • Connection Type: UDP
  • Description: DLNA Port

 

Still confused about the proper usage of "LAN Server address" in the Airsonic web console.  Any other suggestions?

 

 

I have never tried it myself, so not sure about the Lan server address. Try setting it to the IP:port/airsonic. It's should be the same address as you use for accessing airsonic in a browser. 

 

Edit: Just tested here. You need to give airsonic its own IP for it to work. Edit the template, change network to br0, give it an IP of your local network in the IP field. 

Be sure to set the Lan server in airsonic settings to how you access the server. Should be the above I mentioned earlier. 

Edited by saarg
Link to comment
10 hours ago, saarg said:

Try setting it to the IP:port/airsonic. It's should be the same address as you use for accessing airsonic in a browser. 

Thanks for the clarification.  That is how I am setting; with a trailing '/' slash.

10 hours ago, saarg said:

You need to give airsonic its own IP for it to work. Edit the template, change network to br0, give it an IP of your local network in the IP field. 

Network type is set to Bridge, but the template does not have an IP field.  Not sure how to assign this.

Link to comment
2 hours ago, dboonthego said:

Thanks for the clarification.  That is how I am setting; with a trailing '/' slash.

Network type is set to Bridge, but the template does not have an IP field.  Not sure how to assign this.

You need to enable it in docker settings in unraid first i think. 

Link to comment
  • 2 weeks later...
On 11/27/2018 at 3:37 AM, saarg said:

 

If you are still pre 6.4 it's about time to update 😲

Truth.  Upgraded to 6.6.5 last week and found the time to play with Airsonic again tonight.  DLNA is finally working!  ... but I feel like it should have also worked without the OS update.  Thanks for the help.

Link to comment
  • 4 weeks later...

Not sure if it's Airsonic, Docker template, or Unraid OS, but the Airsonic server becomes unresponsive after about 12-24hrs.  Restarting the docker container will bring it back temporarily.  All was working fine until I upgraded stuff.  The docker log shows there is a memory error?

Caused by: java.lang.OutOfMemoryError: GC overhead limit exceeded

Would increasing the JAVA_OPTS help?  My current setting is -Xms256m -Xmx512m

 

Recent changes:

  1. Updated all plugins
  2. Updated Unraid to v6.6.5
  3. Enabled Airsonic DLNA server
  4. Changed the network type to Custom : br0 and assigned a fixed IP in the docker template
  5. Updated Unraid to v6.6.6
Link to comment
  • linuxserver.io changed the title to [Deprecated] Linuxserver.io - airsonic

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.