BillX Posted January 9, 2018 Share Posted January 9, 2018 Hi guys, I'm new to UNRAID. I just installed the OS and currently have 2x 4TB and 3x 10TB drives. Currently only two 10TB have old data (from WHS) on them so I used the other 3 to start an array. The original plan was to use the empty drives to start an array, transfer over the old datas onto the array before formatting and adding ones with data to the array. But I just couldn't find any options on the WebUI to directly mount the drives and read its content. I did search the forums for older posts on this but a lot of the suggestions are confusing and many links are already dead. Is there a quick and easy way to solve this? If there is, please be very thorough and plain with the guides, as I am no expert. Thanks Quote Link to comment
JorgeB Posted January 9, 2018 Share Posted January 9, 2018 You can use the Unassigned Devices plugin if the data drives use a supported filesystem, I assume they are ntfs formatted. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.