Squid Posted January 13, 2018 Share Posted January 13, 2018 1 minute ago, garycase said: Noted the following on 6.4: => On the Plugins page, clicking "Check for Updates" does a check, but after it's done still shows Status: Unknown for my only plugin (Dynamix Cache Directories) => On the new "OS Update" page in Tools, clicking "Check for Updates" does a check, but it also shows Status: Unknown after the check. While you don't have Fix Common Problems installed, it does have an explicit test for the ability to communicate with GitHub basically so you can receive plugin update notifications. What happens if you set a static DNS addresses of 8.8.8.8 and 8.8.4.4? Link to comment
bonienl Posted January 13, 2018 Share Posted January 13, 2018 1 minute ago, garycase said: Noted the following on 6.4: => On the Plugins page, clicking "Check for Updates" does a check, but after it's done still shows Status: Unknown for my only plugin (Dynamix Cache Directories) => On the new "OS Update" page in Tools, clicking "Check for Updates" does a check, but it also shows Status: Unknown after the check. If status is unknown then the repository (github or Limetech) could not be contacted. Do you have internet connection from your server? Link to comment
garycase Posted January 13, 2018 Share Posted January 13, 2018 7 minutes ago, bonienl said: If status is unknown then the repository (github or Limetech) could not be contacted. Do you have internet connection from your server? Yes, it should have a connection. It had no problem getting the update from 6.3.5 and the checks always worked fine then. Link to comment
no1home Posted January 13, 2018 Share Posted January 13, 2018 Just upgraded from 6.3.5 to 6.4.0, process went very smoothly. The only thing I had to do was upgrade my CA Backup plugin to v2 and re-enter settings. One thing I noticed in the Docker page, "Version" shows as "not available" for all of my dockers. Loving the speed of the new interface. Thanks for all your hard work on this release. Link to comment
garycase Posted January 13, 2018 Share Posted January 13, 2018 This seems to show a GB connection, so I'd think it would be able to connect for the update checks. Link to comment
bonienl Posted January 13, 2018 Share Posted January 13, 2018 1 minute ago, garycase said: This seems to show a GB connection, so I'd think it would be able to connect for the update checks. That is only the physical connection state, no guarantees that communication is possible. What happens with (terminal window) ping github.com Link to comment
bonienl Posted January 13, 2018 Share Posted January 13, 2018 8 minutes ago, no1home said: One thing I noticed in the Docker page, "Version" shows as "not available" for all of my dockers. In this release the online check for Docker containers upon system start is removed. You can either do a manual check or wait for the automated check (if enabled). Link to comment
garycase Posted January 13, 2018 Share Posted January 13, 2018 18 minutes ago, bonienl said: That is only the physical connection state, no guarantees that communication is possible. What happens with (terminal window) ping github.com The ping results in a series of 64 byte packets being received until I hit Ctrl-C, which stopped it and gave the following results: GitHub.com ping statistics 58 packets transmitted, 58 received, 0% packet loss, time: 57075 ms rtt min/avg/max/mdev = 44.465/51.391/82.397/5.597 ms Just for grins, I backed up the flash on my main media server and did the update there as well. SAME results with update checks --- "Status: Unknown" for both the plugin and OS checks. It seems to show the check working okay ... Link to comment
Living Legend Posted January 13, 2018 Share Posted January 13, 2018 Just had another hard crash. Here's the log from before. unraid-diagnostics-20180113-1252.zip This time around, unRAID did not auto generate a diagnostic. Link to comment
limetech Posted January 13, 2018 Author Share Posted January 13, 2018 14 minutes ago, Living Legend said: Just had another hard crash. Here's the log from before. unraid-diagnostics-20180113-1252.zip This time around, unRAID did not auto generate a diagnostic. You are getting huge number of errors trying to connect to 192.168.1.4 - what is that? There are a large number of files being moved and log rapidly fills up, maybe turn off mover logging? Settings/Scheduler/Mover Settings Once again, please boot in safe mode and see if problem persists. Link to comment
Living Legend Posted January 13, 2018 Share Posted January 13, 2018 (edited) 6 minutes ago, limetech said: You are getting huge number of errors trying to connect to 192.168.1.4 - what is that? There are a large number of files being moved and log rapidly fills up, maybe turn off mover logging? Settings/Scheduler/Mover Settings Once again, please boot in safe mode and see if problem persists. 192.168.1.4 is IPMI. I do have a plugin for that which I will remove. I will move off mover logging as well. The files are likely the images from surveillance. I already rolled back to 6.3.5 but I'll give 6.4 again after removing some plugins. At this point, the only plugins I'll be using are the CA, Dynamix, Fix Common Problems, Recycle Bin and Unassigned devices. I'll give safe mode ago on next boot. Edited January 13, 2018 by Living Legend Link to comment
gar13 Posted January 13, 2018 Share Posted January 13, 2018 1 hour ago, bonienl said: Open a terminal window and type ping 8.8.8.8 (ctrl-C to break) I get request timeout for any host on my network trying to ping google dns, but I'm using 8.8.8.8 as my main dns in pfsense and can browse internet fine. I can ping github.com directly and the domain name resolves fine: Screenshot 2018-01-13 15.53.31 Link to comment
dirrtyjoe Posted January 13, 2018 Share Posted January 13, 2018 How do you start on a different port? I was using 8008 and webui started on 80. Link to comment
dirrtyjoe Posted January 13, 2018 Share Posted January 13, 2018 2 minutes ago, dirrtyjoe said: How do you start on a different port? I was using 8008 and webui started on 80. Found it in the settings. Link to comment
WilliamABradley Posted January 13, 2018 Share Posted January 13, 2018 I found out how to use SSL provisioning on Linksys routers if you get back an error saying DNS rebinding protection is enabled. You have to disable Filter Ident Port (113) on the Firewall page in the Security Tab. Link to comment
limetech Posted January 13, 2018 Author Share Posted January 13, 2018 47 minutes ago, zin105 said: So does changing "Use SSL/TLS" from Auto to Yes disable all Letsencrypt functionality? yes. Link to comment
cybrnook Posted January 13, 2018 Share Posted January 13, 2018 Upgrade went fine. No (real) issues besides having to add nomodeset at the unraid start menu when booting to avoid a red screen. As requested here: "Some users report vmwrite syslog errors as a result of VM startup. This is a harmless message and can be ignored; however, please report if you see this." Link to comment
ezhik Posted January 14, 2018 Share Posted January 14, 2018 Updated 3 systems, no problems. Using my own certs for SSL, no issues. Can confirm, multi-threading works now (multiple operations/requests at the same time) Link to comment
jonp Posted January 14, 2018 Share Posted January 14, 2018 Thanks everyone for all the feedback on the new release so far!! It really helps to know how people are doing with their upgrades and what issues (if any) arise. Please keep it up! 2 Link to comment
OmgImAlexis Posted January 14, 2018 Share Posted January 14, 2018 The only issue I've had so far is even after moving the UI to port 99 and 9443 I can't bring up any of my containers on port 80 or 443 as they're still being used. I can't restart to check if that'll fix right now as I'm running a parity check but I'm guessing that's all I need todo to free the port from nginx? P.S. Love that my parity check went from 10MB/s per drive to 50MB/s after the last update. Link to comment
coolspot Posted January 14, 2018 Share Posted January 14, 2018 Congratulations on the release? To all the early adopters... so far so good? :-) I'll probably give it a try tomorrow or next weekend. Link to comment
slacker Posted January 14, 2018 Share Posted January 14, 2018 Below is the return from clicking the "Download Now" link on the Plugin Page. plugin: updating: unRAIDServer.plg plugin: downloading: https://s3.amazonaws.com/dnld.lime-technology.com/stable/unRAIDServer-6.4.0-x86_64.zip ... failed (File I/O error) plugin: wget: https://s3.amazonaws.com/dnld.lime-technology.com/stable/unRAIDServer-6.4.0-x86_64.zip download failure (File I/O error) Link to comment
Zonediver Posted January 14, 2018 Share Posted January 14, 2018 Updated without any issue so far - BUT... The GUI is now streched over the whole screen width - strange... Is there a setting to come back to a "normal" screen? Link to comment
Living Legend Posted January 14, 2018 Share Posted January 14, 2018 48 minutes ago, jonp said: Thanks everyone for all the feedback on the new release so far!! It really helps to know how people are doing with their upgrades and what issues (if any) arise. Please keep it up! Outside of safe mode, are there any other ways in trying to figure out the reason for my constant hard crash? I had to roll back to 6.3.5 as the family was getting cranky with me all day with the constant hard crashes where it'd only last for an hour and their tv shows would freeze. Here again is the diagnostic from before the first freeze:unraid-diagnostics-20180113-1252.zip I have since removed nearly ever Plugin that's not CA or Dymanix. The only other ones I run are quite popular ones: Unassigned Devices Fix Common Problems Nerd Tools Preclear Disks Recycle Bin Server Layout User Scripts If I'm at a dead end I'll upgrade again tonight when the family gets to sleep and see what happens. Link to comment
wgstarks Posted January 14, 2018 Share Posted January 14, 2018 4 minutes ago, Living Legend said: Unassigned Devices Fix Common Problems Nerd Tools Preclear Disks Recycle Bin Server Layout User Scripts Probably not a fix, but I know Server Layout is not compatible with 6.4 unless you have made the mods described in that thread. Link to comment
Recommended Posts