Hi,

 

Description:

Last night my Unraid server completely locked up, no inputs/keystrokes were being accepted and it was no longer on the network. I was still able to access it via IPMI to do a remote restart.

 

This morning the same thing happened, However I was able to get some information as I had left htop open on the IPMI console. CPU was at around 5% active and RAM was about 60% used. It also completed after the parity check was completed which took 8 hours 20mins (push bullet notification) and had no errors.

 

I suspect the RAM to be the issue (basic ddr3 sticks), so I'm doing a memtest. How ever if that comes back OK, what else should I be looking for and where would I find it to help assist(eg. logs).

After the memory test is complete, I will be able to get exact HW and software configurations to help assist with this issue.

 

Other information: 

Unraid Ver: 6.3.5

Motherboard/CPU: ASRock C2750D4I

RAM: DDR3 8GB

Cache: 2 SSD

HDD array: 1P/8 Array Drives (73% filled)

Dockers: 5 Running

VM: 1 (4 cpu cores, 2gb ram allocated) Running

 

MB Temp: ~54c

CPU Temp: ~47c

Edited January 30, 20188 yr by alucarddelta

UPDATE:

Memtest came back clean

Adding further info to post including diagnostics

 

acnologia-diagnostics-20180116-1510.zip

Update:

Lasted just under an hour before crashing again and locking up. I was able to get a Screen Shot of the htop screen when it happened. Booting again in safe mode.

 

Edited January 16, 20188 yr by alucarddelta

Try updating to v6.4

When I tried to update to v6.4 the entire system went down and now no longer powers on. This kinda leads to a HW issue over SW. Last message I got was that the CPU temp spiked to 92c then nothing. So I think the system dead.