I did my search on google and did not found any clear awnser noir solution. Please help.

 

Quote

Jan 18 03:07:56 StorageBox kernel: ata11.00: disabling queued TRIM support
Jan 18 03:07:56 StorageBox kernel: ata11.00: supports DRM functions and may not be fully accessible
Jan 18 03:07:56 StorageBox kernel: ata11.00: disabling queued TRIM support
Jan 18 03:07:56 StorageBox kernel: ata11.00: configured for UDMA/133
Jan 18 03:07:56 StorageBox kernel: ata11: EH complete
Jan 18 05:29:55 StorageBox kernel: ata11.00: exception Emask 0x10 SAct 0xc000000 SErr 0x280100 action 0x6 frozen
Jan 18 05:29:55 StorageBox kernel: ata11.00: irq_stat 0x08000000, interface fatal error
Jan 18 05:29:55 StorageBox kernel: ata11: SError: { UnrecovData 10B8B BadCRC }
Jan 18 05:29:55 StorageBox kernel: ata11.00: failed command: READ FPDMA QUEUED
Jan 18 05:29:55 StorageBox kernel: ata11.00: cmd 60/a0:d0:20:96:c4/06:00:07:00:00/40 tag 26 ncq dma 868352 in
Jan 18 05:29:55 StorageBox kernel: res 40/00:d0:20:96:c4/00:00:07:00:00/40 Emask 0x10 (ATA bus error)
Jan 18 05:29:55 StorageBox kernel: ata11.00: status: { DRDY }
Jan 18 05:29:55 StorageBox kernel: ata11.00: failed command: READ FPDMA QUEUED
Jan 18 05:29:55 StorageBox kernel: ata11.00: cmd 60/60:d8:c0:9c:c4/09:00:07:00:00/40 tag 27 ncq dma 1228800 in
Jan 18 05:29:55 StorageBox kernel: res 40/00:d0:20:96:c4/00:00:07:00:00/40 Emask 0x10 (ATA bus error)
Jan 18 05:29:55 StorageBox kernel: ata11.00: status: { DRDY }
Jan 18 05:29:55 StorageBox kernel: ata11: hard resetting link
Jan 18 05:29:56 StorageBox kernel: ata11: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Jan 18 05:29:56 StorageBox kernel: ata11.00: supports DRM functions and may not be fully accessible
Jan 18 05:29:56 StorageBox kernel: ata11.00: disabling queued TRIM support
Jan 18 05:29:56 StorageBox kernel: ata11.00: supports DRM functions and may not be fully accessible
Jan 18 05:29:56 StorageBox kernel: ata11.00: disabling queued TRIM support
Jan 18 05:29:56 StorageBox kernel: ata11.00: configured for UDMA/133
Jan 18 05:29:56 StorageBox kernel: ata11: EH complete
Jan 18 09:34:08 StorageBox kernel: pcieport 0000:00:02.0: AER: Corrected error received: id=0010
Jan 18 09:34:08 StorageBox kernel: pcieport 0000:00:02.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0010(Receiver ID)
Jan 18 09:34:08 StorageBox kernel: pcieport 0000:00:02.0: device [8086:2f04] error status/mask=00000001/00002000
Jan 18 09:34:08 StorageBox kernel: pcieport 0000:00:02.0: [ 0] Receiver Error (First)
Jan 18 11:04:18 StorageBox kernel: pcieport 0000:00:02.0: AER: Corrected error received: id=0010
Jan 18 11:04:18 StorageBox kernel: pcieport 0000:00:02.0: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=0010(Receiver ID)
Jan 18 11:04:18 StorageBox kernel: pcieport 0000:00:02.0: device [8086:2f04] error status/mask=00000001/00002000
Jan 18 11:04:18 StorageBox kernel: pcieport 0000:00:02.0: [ 0] Receiver Error (First)

 

Please post your diagnostics: Tools -> Diagnostics

Sorry and thanks for the tip. Here it is

storagebox-diagnostics-20180118-1235.zip

Most likely a bad SATA cable on Cache2 SSD:

 

199 CRC_Error_Count         -OSRCK   099   099   000    -    102

Once you replace it monitor this value, it won't reset but if all is well it will stop increasing.

Thanks i will order a few new cables today to test.

2 hours ago, johnnie.black said:

Most likely a bad SATA cable on Cache2 SSD:

 

199 CRC_Error_Count         -OSRCK   099   099   000    -    102

Once you replace it monitor this value, it won't reset but if all is well it will stop increasing.

Both error have to do with sata cable ?

The ATA errors yes, the PCIe errors no, those can sometimes be fixed by using the offending controller on a different slot, or with a bios update.